mx31: move freescale's mx31 boards to vendor board dir
Subsystems (3)
PATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
---
Makefile | 6 +++---
board/{ => freescale}/imx31_litekit/Makefile | 0
board/{ => freescale}/imx31_litekit/config.mk | 0
.../{ => freescale}/imx31_litekit/imx31_litekit.c | 0
.../{ => freescale}/imx31_litekit/lowlevel_init.S | 0
board/{ => freescale}/imx31_litekit/u-boot.lds | 0
board/{ => freescale}/imx31_phycore/Makefile | 0
board/{ => freescale}/imx31_phycore/config.mk | 0
.../{ => freescale}/imx31_phycore/imx31_phycore.c | 0
.../{ => freescale}/imx31_phycore/lowlevel_init.S | 0
board/{ => freescale}/imx31_phycore/u-boot.lds | 0
board/{ => freescale}/mx31ads/Makefile | 0
board/{ => freescale}/mx31ads/config.mk | 0
board/{ => freescale}/mx31ads/lowlevel_init.S | 0
board/{ => freescale}/mx31ads/mx31ads.c | 0
board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++-----
16 files changed, 8 insertions(+), 8 deletions(-)
rename board/{ => freescale}/imx31_litekit/Makefile (100%)
rename board/{ => freescale}/imx31_litekit/config.mk (100%)
rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%)
rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%)
rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%)
rename board/{ => freescale}/imx31_phycore/Makefile (100%)
rename board/{ => freescale}/imx31_phycore/config.mk (100%)
rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%)
rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%)
rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%)
rename board/{ => freescale}/mx31ads/Makefile (100%)
rename board/{ => freescale}/mx31ads/config.mk (100%)
rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
rename board/{ => freescale}/mx31ads/u-boot.lds (90%)Makefile +3 -3
@@ -2666,13 +2666,13 @@ apollon_config : unconfig @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk imx31_litekit_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit freescale mx31 imx31_phycore_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore freescale mx31 mx31ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
board/freescale/imx31_litekit/Makefile renamed from board/imx31_litekit/Makefile +0 -0
board/freescale/imx31_litekit/config.mk renamed from board/imx31_litekit/config.mk +0 -0
board/freescale/imx31_litekit/imx31_litekit.c renamed from board/imx31_litekit/imx31_litekit.c +0 -0
board/freescale/imx31_litekit/lowlevel_init.S renamed from board/imx31_litekit/lowlevel_init.S +0 -0
board/freescale/imx31_litekit/u-boot.lds renamed from board/imx31_litekit/u-boot.lds +0 -0
board/freescale/imx31_phycore/Makefile renamed from board/imx31_phycore/Makefile +0 -0
board/freescale/imx31_phycore/config.mk renamed from board/imx31_phycore/config.mk +0 -0
board/freescale/imx31_phycore/imx31_phycore.c renamed from board/imx31_phycore/imx31_phycore.c +0 -0
board/freescale/imx31_phycore/lowlevel_init.S renamed from board/imx31_phycore/lowlevel_init.S +0 -0
board/freescale/imx31_phycore/u-boot.lds renamed from board/imx31_phycore/u-boot.lds +0 -0
board/freescale/mx31ads/Makefile renamed from board/mx31ads/Makefile +0 -0
board/freescale/mx31ads/config.mk renamed from board/mx31ads/config.mk +0 -0
board/freescale/mx31ads/lowlevel_init.S renamed from board/mx31ads/lowlevel_init.S +0 -0
board/freescale/mx31ads/mx31ads.c renamed from board/mx31ads/mx31ads.c +0 -0
board/freescale/mx31ads/u-boot.lds renamed from board/mx31ads/u-boot.lds +5 -5
@@ -37,11 +37,11 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/arm1136/start.o (.text) - board/mx31ads/libmx31ads.a (.text) - lib_arm/libarm.a (.text) - net/libnet.a (.text) - drivers/mtd/libmtd.a (.text) + cpu/arm1136/start.o (.text) + board/freescale/mx31ads/libmx31ads.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) . = DEFINED(env_offset) ? env_offset : .; common/environment.o(.text)
Signature · 1 line
1.5.6.3
PATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
Quoted 127 lines · In message <[email protected]> you wrote:
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- Makefile | 6 +++--- board/{ => freescale}/imx31_litekit/Makefile | 0 board/{ => freescale}/imx31_litekit/config.mk | 0 .../{ => freescale}/imx31_litekit/imx31_litekit.c | 0 .../{ => freescale}/imx31_litekit/lowlevel_init.S | 0 board/{ => freescale}/imx31_litekit/u-boot.lds | 0 board/{ => freescale}/imx31_phycore/Makefile | 0 board/{ => freescale}/imx31_phycore/config.mk | 0 .../{ => freescale}/imx31_phycore/imx31_phycore.c | 0 .../{ => freescale}/imx31_phycore/lowlevel_init.S | 0 board/{ => freescale}/imx31_phycore/u-boot.lds | 0 board/{ => freescale}/mx31ads/Makefile | 0 board/{ => freescale}/mx31ads/config.mk | 0 board/{ => freescale}/mx31ads/lowlevel_init.S | 0 board/{ => freescale}/mx31ads/mx31ads.c | 0 board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++----- 16 files changed, 8 insertions(+), 8 deletions(-) rename board/{ => freescale}/imx31_litekit/Makefile (100%) rename board/{ => freescale}/imx31_litekit/config.mk (100%) rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%) rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%) rename board/{ => freescale}/imx31_phycore/Makefile (100%) rename board/{ => freescale}/imx31_phycore/config.mk (100%) rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%) rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%) rename board/{ => freescale}/mx31ads/Makefile (100%) rename board/{ => freescale}/mx31ads/config.mk (100%) rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%) rename board/{ => freescale}/mx31ads/mx31ads.c (100%) rename board/{ => freescale}/mx31ads/u-boot.lds (90%)Makefile +3
-3@@ -2666,13 +2666,13 @@ apollon_config : unconfig @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk imx31_litekit_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit freescale mx31 imx31_phycore_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore freescale mx31 mx31ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xxboard/freescale/imx31_litekit/Makefile renamed from board/imx31_litekit/Makefile +0
-0board/freescale/imx31_litekit/config.mk renamed from board/imx31_litekit/config.mk +0
-0board/freescale/imx31_litekit/imx31_litekit.c renamed from board/imx31_litekit/imx31_litekit.c +0
-0board/freescale/imx31_litekit/lowlevel_init.S renamed from board/imx31_litekit/lowlevel_init.S +0
-0board/freescale/imx31_litekit/u-boot.lds renamed from board/imx31_litekit/u-boot.lds +0
-0board/freescale/imx31_phycore/Makefile renamed from board/imx31_phycore/Makefile +0
-0board/freescale/imx31_phycore/config.mk renamed from board/imx31_phycore/config.mk +0
-0board/freescale/imx31_phycore/imx31_phycore.c renamed from board/imx31_phycore/imx31_phycore.c +0
-0board/freescale/imx31_phycore/lowlevel_init.S renamed from board/imx31_phycore/lowlevel_init.S +0
-0board/freescale/imx31_phycore/u-boot.lds renamed from board/imx31_phycore/u-boot.lds +0
-0board/freescale/mx31ads/Makefile renamed from board/mx31ads/Makefile +0
-0board/freescale/mx31ads/config.mk renamed from board/mx31ads/config.mk +0
-0board/freescale/mx31ads/lowlevel_init.S renamed from board/mx31ads/lowlevel_init.S +0
-0board/freescale/mx31ads/mx31ads.c renamed from board/mx31ads/mx31ads.c +0
-0board/freescale/mx31ads/u-boot.lds renamed from board/mx31ads/u-boot.lds +0
-3@@ -37,11 +37,11 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/arm1136/start.o (.text) - board/mx31ads/libmx31ads.a (.text) - lib_arm/libarm.a (.text)
board/freescale/mx31ads/u-boot.lds SECTIONS · line 47
Quoted 10 lines
board/freescale/mx31ads/u-boot.lds renamed from board/mx31ads/u-boot.lds +5
-2- net/libnet.a (.text) - drivers/mtd/libmtd.a (.text) + cpu/arm1136/start.o (.text) + board/freescale/mx31ads/libmx31ads.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) . = DEFINED(env_offset) ? env_offset : .; common/environment.o(.text)
Acked-by Wolfgang Denk <[email protected]>
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de : I've tried (in vi) "g/[a-z]\n[a-z]/s//_/"...but that doesn't : cut it. Any ideas? (I take it that it may be a two-pass sort of solution). In the first pass, install perl. :-) Larry Wall <[email protected]>
PATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 26 lines · Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- Makefile | 6 +++--- board/{ => freescale}/imx31_litekit/Makefile | 0 board/{ => freescale}/imx31_litekit/config.mk | 0 .../{ => freescale}/imx31_litekit/imx31_litekit.c | 0 .../{ => freescale}/imx31_litekit/lowlevel_init.S | 0 board/{ => freescale}/imx31_litekit/u-boot.lds | 0 board/{ => freescale}/imx31_phycore/Makefile | 0 board/{ => freescale}/imx31_phycore/config.mk | 0 .../{ => freescale}/imx31_phycore/imx31_phycore.c | 0 .../{ => freescale}/imx31_phycore/lowlevel_init.S | 0 board/{ => freescale}/imx31_phycore/u-boot.lds | 0 board/{ => freescale}/mx31ads/Makefile | 0 board/{ => freescale}/mx31ads/config.mk | 0 board/{ => freescale}/mx31ads/lowlevel_init.S | 0 board/{ => freescale}/mx31ads/mx31ads.c | 0 board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++----- 16 files changed, 8 insertions(+), 8 deletions(-) rename board/{ => freescale}/imx31_litekit/Makefile (100%) rename board/{ => freescale}/imx31_litekit/config.mk (100%) rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%) rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%) rename board/{ => freescale}/imx31_phycore/Makefile (100%) rename board/{ => freescale}/imx31_phycore/config.mk (100%)
Quoted 8 lines
rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%)
rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%)
rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%)
rename board/{ => freescale}/mx31ads/Makefile (100%)
rename board/{ => freescale}/mx31ads/config.mk (100%)
rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
rename board/{ => freescale}/mx31ads/u-boot.lds (90%)I'm not sure: is the phycore board a Freescale board? Isn't it Phytec?
Kind regards,
Jens
PATCH v2 1/1 mx31: move freescale's mx31 boards to vendor board dir
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
---
remove imx31_phycore which is from phytec
Makefile | 4 ++--
board/{ => freescale}/imx31_litekit/Makefile | 0
board/{ => freescale}/imx31_litekit/config.mk | 0
.../{ => freescale}/imx31_litekit/imx31_litekit.c | 0
.../{ => freescale}/imx31_litekit/lowlevel_init.S | 0
board/{ => freescale}/imx31_litekit/u-boot.lds | 0
board/{ => freescale}/mx31ads/Makefile | 0
board/{ => freescale}/mx31ads/config.mk | 0
board/{ => freescale}/mx31ads/lowlevel_init.S | 0
board/{ => freescale}/mx31ads/mx31ads.c | 0
board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++-----
11 files changed, 7 insertions(+), 7 deletions(-)
rename board/{ => freescale}/imx31_litekit/Makefile (100%)
rename board/{ => freescale}/imx31_litekit/config.mk (100%)
rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%)
rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%)
rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%)
rename board/{ => freescale}/mx31ads/Makefile (100%)
rename board/{ => freescale}/mx31ads/config.mk (100%)
rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
rename board/{ => freescale}/mx31ads/u-boot.lds (90%)Makefile +2 -2
@@ -2666,13 +2666,13 @@ apollon_config : unconfig @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk imx31_litekit_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit freescale mx31 imx31_phycore_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
board/freescale/imx31_litekit/Makefile renamed from board/imx31_litekit/Makefile +0 -0
board/freescale/imx31_litekit/config.mk renamed from board/imx31_litekit/config.mk +0 -0
board/freescale/imx31_litekit/imx31_litekit.c renamed from board/imx31_litekit/imx31_litekit.c +0 -0
board/freescale/imx31_litekit/lowlevel_init.S renamed from board/imx31_litekit/lowlevel_init.S +0 -0
board/freescale/imx31_litekit/u-boot.lds renamed from board/imx31_litekit/u-boot.lds +0 -0
board/freescale/mx31ads/Makefile renamed from board/mx31ads/Makefile +0 -0
board/freescale/mx31ads/config.mk renamed from board/mx31ads/config.mk +0 -0
board/freescale/mx31ads/lowlevel_init.S renamed from board/mx31ads/lowlevel_init.S +0 -0
board/freescale/mx31ads/mx31ads.c renamed from board/mx31ads/mx31ads.c +0 -0
board/freescale/mx31ads/u-boot.lds renamed from board/mx31ads/u-boot.lds +5 -5
@@ -37,11 +37,11 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/arm1136/start.o (.text) - board/mx31ads/libmx31ads.a (.text) - lib_arm/libarm.a (.text) - net/libnet.a (.text) - drivers/mtd/libmtd.a (.text) + cpu/arm1136/start.o (.text) + board/freescale/mx31ads/libmx31ads.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) . = DEFINED(env_offset) ? env_offset : .; common/environment.o(.text)
Signature · 1 line
1.5.6.3
PATCH v2 1/1 mx31: move freescale's mx31 boards to vendor board dir
Quoted 17 lines · In message <[email protected]> you wrote:
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>---
removeimx31_phycorewhich is from phytecMakefile | 4 ++-- board/{ => freescale}/imx31_litekit/Makefile | 0 board/{ => freescale}/imx31_litekit/config.mk | 0 .../{ => freescale}/imx31_litekit/imx31_litekit.c | 0 .../{ => freescale}/imx31_litekit/lowlevel_init.S | 0 board/{ => freescale}/imx31_litekit/u-boot.lds | 0 board/{ => freescale}/mx31ads/Makefile | 0 board/{ => freescale}/mx31ads/config.mk | 0 board/{ => freescale}/mx31ads/lowlevel_init.S | 0 board/{ => freescale}/mx31ads/mx31ads.c | 0 board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++----- 11 files changed, 7 insertions(+), 7 deletions(-) rename board/{ => freescale}/imx31_litekit/Makefile (100%) rename board/{ => freescale}/imx31_litekit/config.mk (100%)
Quoted 8 lines
rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%)
rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%)
rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%)
rename board/{ => freescale}/mx31ads/Makefile (100%)
rename board/{ => freescale}/mx31ads/config.mk (100%)
rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
rename board/{ => freescale}/mx31ads/u-boot.lds (90%)NAK. As Magnus pointed out, the imx31_litekit isn't Freescale, either.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de As far as the laws of mathematics refer to reality, they are not certain; and as far as they are certain, they do not refer to reality. -- Albert Einstein
PATCH v3 1/1 mx31: move freescale's mx31 board to vendor board dir
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
---
remove miss match freescale board
Freescale Zoom??? i.MX31 LITEKIT
Makefile | 2 +-
board/{ => freescale}/mx31ads/Makefile | 0
board/{ => freescale}/mx31ads/config.mk | 0
board/{ => freescale}/mx31ads/lowlevel_init.S | 0
board/{ => freescale}/mx31ads/mx31ads.c | 0
board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++-----
6 files changed, 6 insertions(+), 6 deletions(-)
rename board/{ => freescale}/mx31ads/Makefile (100%)
rename board/{ => freescale}/mx31ads/config.mk (100%)
rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
rename board/{ => freescale}/mx31ads/u-boot.lds (90%)Makefile +1 -1
@@ -2672,7 +2672,7 @@ imx31_phycore_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
board/freescale/mx31ads/Makefile renamed from board/mx31ads/Makefile +0 -0
board/freescale/mx31ads/config.mk renamed from board/mx31ads/config.mk +0 -0
board/freescale/mx31ads/lowlevel_init.S renamed from board/mx31ads/lowlevel_init.S +0 -0
board/freescale/mx31ads/mx31ads.c renamed from board/mx31ads/mx31ads.c +0 -0
board/freescale/mx31ads/u-boot.lds renamed from board/mx31ads/u-boot.lds +5 -5
@@ -37,11 +37,11 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/arm1136/start.o (.text) - board/mx31ads/libmx31ads.a (.text) - lib_arm/libarm.a (.text) - net/libnet.a (.text) - drivers/mtd/libmtd.a (.text) + cpu/arm1136/start.o (.text) + board/freescale/mx31ads/libmx31ads.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) . = DEFINED(env_offset) ? env_offset : .; common/environment.o(.text)
Signature · 1 line
1.5.6.2
PATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
In reply to Jens GehrleinHi
Quoted 36 lines · Jens Gehrlein
Quoted 26 lines · Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- Makefile | 6 +++--- board/{ => freescale}/imx31_litekit/Makefile | 0 board/{ => freescale}/imx31_litekit/config.mk | 0 .../{ => freescale}/imx31_litekit/imx31_litekit.c | 0 .../{ => freescale}/imx31_litekit/lowlevel_init.S | 0 board/{ => freescale}/imx31_litekit/u-boot.lds | 0 board/{ => freescale}/imx31_phycore/Makefile | 0 board/{ => freescale}/imx31_phycore/config.mk | 0 .../{ => freescale}/imx31_phycore/imx31_phycore.c | 0 .../{ => freescale}/imx31_phycore/lowlevel_init.S | 0 board/{ => freescale}/imx31_phycore/u-boot.lds | 0 board/{ => freescale}/mx31ads/Makefile | 0 board/{ => freescale}/mx31ads/config.mk | 0 board/{ => freescale}/mx31ads/lowlevel_init.S | 0 board/{ => freescale}/mx31ads/mx31ads.c | 0 board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++----- 16 files changed, 8 insertions(+), 8 deletions(-) rename board/{ => freescale}/imx31_litekit/Makefile (100%) rename board/{ => freescale}/imx31_litekit/config.mk (100%) rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%) rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%) rename board/{ => freescale}/imx31_phycore/Makefile (100%) rename board/{ => freescale}/imx31_phycore/config.mk (100%)Quoted 8 lines
rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%) rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%) rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%) rename board/{ => freescale}/mx31ads/Makefile (100%) rename board/{ => freescale}/mx31ads/config.mk (100%) rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%) rename board/{ => freescale}/mx31ads/mx31ads.c (100%) rename board/{ => freescale}/mx31ads/u-boot.lds (90%)
Quoted 1 line
I'm not sure: is the phycore board a Freescale board? Isn't it Phytec?
Same goes for the Litekit board, the board is from LogicPD but the SoC is from Freescale. Perhaps a 'imx' or 'imx31' directory would be better with all i.MX{31} boards in that directory.
Regards, Magnus
PATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
Quoted 2 lines · In message <[email protected]> you…
Same goes for the Litekit board, the board is from LogicPD but the SoC
Arg. What a mess :-(
Quoted 2 lines
is from Freescale. Perhaps a 'imx' or 'imx31' directory would be better with all i.MX{31} boards in that directory.
No, we will not do that.
We have vendor directories, not CPU directories, under boards/
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Testing can show the presense of bugs, but not their absence.
-- Edsger DijkstraPATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
In reply to Magnus LiljaQuoted 2 lines · Magnus Lilja
Perhaps a 'imx' or 'imx31' directory would be better with all i.MX{31} boards in that directory.
Hmm... I propose to keep it consistent: either the boards should be sorted by board vendor, or there could be a new directory between "board" and "board/<vendor>" emphasizing the CPU type, which could help develepors to find a reference platform faster, e.g. "board/<cpu>/<vendor>"
Kind regards,
Jens
PATCH 1/1 mx31: move freescale's mx31 boards to vendor board dir
In reply to Jens GehrleinQuoted 6 lines · In message <[email protected]> you wrote:
Quoted 6 lines
board/{ => freescale}/imx31_phycore/Makefile | 0 board/{ => freescale}/imx31_phycore/config.mk | 0 .../{ => freescale}/imx31_phycore/imx31_phycore.c | 0 .../{ => freescale}/imx31_phycore/lowlevel_init.S | 0 board/{ => freescale}/imx31_phycore/u-boot.lds | 0
...
Quoted 1 line
I'm not sure: is the phycore board a Freescale board? Isn't it Phytec?
Well spotted! You are right, that's a Phytec board!!
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Every living thing wants to survive. -- Spock, "The Ultimate Computer", stardate 4731.3