Patch: gspca-zc3xx-pas106b-detect.patch

Hi,

This patch moves the detection of the 2wr SIF pas106b sensor to before detecing other 2 wire sensors (as it was done with gspcav1) without this the pas106b gets misdetected as an HDCS2020b.

This makes my Philips SPC 200NC cam work, but unfortunately the picture is upside down (same with gspcav1). While experimenting to try to fix this I've found the meaning of one pas106b register and a comment now documents this.

Regards,

Hans

This patch moves the detection of the 2wr SIF pas106b sensor to before detecing other 2 wire sensors (as it was done with gspcav1) without this the pas106b gets misdetected as an HDCS2020b.

This makes my Philips SPC 200NC cam work, but unfortunately the picture is upside down (same with gspcav1). While experimenting to try to fix this I've found the meaning of one pas106b register and a comment now documents this.

diff -r 380c5715fd90 linux/drivers/media/video/gspca/zc3xx.c
@@ -4134,6 +4134,7 @@
 	{0xaa, 0x0c, 0x0005},
 	{0xaa, 0x0d, 0x0000},
 	{0xaa, 0x0e, 0x0002},
+/*	{0xaa, 0x11, 0x0000}, seems to control exposure (0 = max exp) */
 	{0xaa, 0x14, 0x0081},
 
 /* Other registors */

@@ -6972,6 +6973,10 @@
 				/* may probe but with write in reg 0x0010 */
 		return -1;		/* don't probe */
 	}
+	sensor = sif_probe(gspca_dev);
+	if (sensor >= 0)
+		return sensor;
+
 	sensor = vga_2wr_probe(gspca_dev);
 	if (sensor >= 0) {
 		if (sensor < 0x7600)

@@ -6984,7 +6989,7 @@
 			return sensor;
 		return sensor2;
 	}
-	return sif_probe(gspca_dev);
+	return -1;
 }
 
 /* this function is called at probe time */

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list