Skip to contentSkip to conversation

Alsa-devel Digest, Vol 18, Issue 45

DISCUSSION S. Aguinaga 3 participants 3 messages Aug 16, 2008 – Aug 18, 2008

lore
Share & tools
lore
#0 lore raw

Stan,
Thank you for spending time to look at this issue. I owe you a drink, when you are in the chicago area let me know and I'll treat you to one.

Ok, so I will check with the developers an see what can be done to correct this. Thank you.

//Salvador

1. Re: latest Mac Pro (quad core) audio issues (stan)

Message: 1
Date: Fri, 15 Aug 2008 15:14:12 -0700
From: stan <[email protected]>
Subject: Re: [alsa-devel] latest Mac Pro (quad core) audio issues
To: "S. Aguinaga" <[email protected]>
Cc: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Quoted 29 lines · S. Aguinaga

Hello Stan,

This is awesome I did find the problem it's listed in the /var/log/messages under ALSA.

1.   When I bring up the "Pulse Volume Control" gui, the first tab "Playback"  comes up empty, and grayed-out is "No Streams Available"
2.   aplay does not produce sound, period!
3.   Amrok's welcome sample does not produce sound out of the std tower speaker or the headphone jack.

I didn't notice anything strange on the output of the alsa-info.sh file, but when I checked the var/log/messages, this is what I found:

sudo cat /var/log/messages | grep ALSA

Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
Quoted 5 lines

Let me know if I should send something else.

// Salvador
// Northwestern University

I think your problem is a misidentification of your sound chip. The model being used for your 889A appears to be incompatible, thus all the errors above. It appears that the macpro ALC885 is being selected before it gets to the choice for the ALC889A. Perhaps a developer can look into this.

!!HDA-Intel Codec information
!!---------------------------

Codec: Realtek ALC889A

!!Aplay/Arecord output
!!------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC885 Analog [ALC885 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

One shows ALC889A and the other shows ALC885. In the driver code there is a comment to the effect that the 889A is best handled as an ALC888, yet the macpro is listed under the ALC885.

I am not a developer so can't go beyond this, but it seems that there is a problem. There should be a macpro under the ALC888 as well as the 885.

Here are the model options for the two candidates

ALC882/885
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
targa Targa T8, MSI-1049 T8
asus-a7j ASUS A7J
asus-a7m ASUS A7M
macpro MacPro support
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
auto auto-config reading BIOS (default)

ALC883/888
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
3stack-6ch 3-jack 6-channel
3stack-6ch-dig 3-jack 6-channel with SPDIF I/O 6stack-dig-demo 6-jack digital for Intel demo board
acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
acer-aspire Acer Aspire 9810
medion Medion Laptops
medion-md2 Medion MD2
targa-dig Targa/MSI
targa-2ch-dig Targs/MSI with 2-channel
laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
lenovo-101e Lenovo 101E
lenovo-nb0763 Lenovo NB0763
lenovo-ms7195-dig Lenovo MS7195
haier-w66 Haier W66
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
auto auto-config reading BIOS (default)

Quoted 1 line

From the code, here is the comment indicating it should be treated as

an ALC888:

if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
        /* Pick up systems that don't supply PCI SSID */
        switch (codec->subsystem_id) {
        case 0x106b0c00: /* Mac Pro */
            board_config = ALC885_MACPRO;
            break;
        case 0x106b1000: /* iMac 24 */
            board_config = ALC885_IMAC24;
            break;
        case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
        case 0x106b2c00: /* Macbook Pro rev3 */
        case 0x106b3600: /* Macbook 3.1 */
            board_config = ALC885_MBP3;
            break;
        default:
            /* ALC889A is handled better as ALC888-compatible */
            if (codec->revision_id == 0x100103) {
                alc_free(codec);
                return patch_alc883(codec);
            }
            printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
                            "trying auto-probe from BIOS...\n");
            board_config = ALC882_AUTO;
        }
    }

------------------------------

Message: 2
Date: Fri, 15 Aug 2008 16:15:45 -0700
From: "John L. Utz III" <[email protected]>
Subject: [alsa-devel] alsa git: which version of ac97_codec.c am i
supposed to hxr?
To: "ALSA Developers" <[email protected]>
Message-ID: <op.ufyawjke647oa9@jutz-gnto64>
Content-Type: text/plain; charset=us-ascii; format=flowed; delsp=yes

Hello All;

I feel confused by the presence of 2 different copies of ac97_codec.c:

jutz-gnto ~ # find . -name ac97_codec.c

     ./alsa-driver/pci/ac97/ac97_codec.c
     ./alsa-kmirror/pci/ac97/ac97_codec.c

worse yet,they are not in sync:

jutz-gnto ~ # diff -w ./alsa-driver/pci/ac97/ac97_codec.c ./alsa-kmirror/pci/ac97/ac97_codec.c
1d0
< #include "adriver.h"
38c37
< #include "../../alsa-kernel/pci/ac97/ac97_id.h"
---

Quoted 1 line

#include "ac97_id.h"

40c39
< #include "../../alsa-kernel/pci/ac97/ac97_patch.c"
---

Quoted 1 line

#include "ac97_patch.c"

1917d1915
< #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) 1929d1926
< #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 14) 1931d1927
< #endif
1953,1956d1948
< #else /* <= 2.6.0 */
< #define snd_ac97_dev_register NULL
< #define snd_ac97_dev_disconnect NULL
< #endif

Which of these am i supposed to use? am i supposed to change both of them for some backward compatibility purpose?

tnx!

johnu

------------------------------

Message: 3
Date: Sat, 16 Aug 2008 06:27:02 +0000 (UTC)
From: Simon Tremblay <[email protected]>
Subject: [alsa-devel] Configure and use dmix with a new ASoC driver
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii

Hi,

I don't know if there is something special I should do to be able to use dmix with my new ASoC driver I made (TLV320AIC23b codec running on a AT91RM9200 board).

The problem is when I try to use dmix with aplay, it doesn't work and I got this error message:

# aplay -v -D plug:dmix /media/usb0/tada.wav
aplay: main:545: audio open error: Operation not permitted
#

Listing of my /dev/snd:

# ls -al /dev/snd
drwxr-xr-x    2 root     root            0 Jan  1 00:01 .
drwxr-xr-x    7 root     root            0 Jan  1 00:01 ..
crw-rw----    1 root     audio    116,   0 Jan  1 00:01 controlC0
crw-rw----    1 root     audio    116,  16 Jan  1 00:01 pcmC0D0p

Notice I have a default /usr/share/alsa/alsa.conf file too. I'm running ALSA 1.0.15. Of course, it works well when I play a sound without the -D plug:dmix parameter...

# aplay /media/usb0/tada.wav
at91-ssc:ssc_startup: SSC_SR=0x000004c3
armus_tlv320aic23b: pck1 started
asoc: aic23b <-> at91-ssc1 info:
asoc: rate mask 0x6fe
asoc: min ch 1 max ch 2
asoc: min rate 8000 max rate 96000
Playing WAVE '/media/usb0/tada.wav' : Signed 16 bit Little Endian, Rate 48000
Hz, Stereo
#

I tried to find some useful documentation about dmix but mainly it says that when we have a recent version of ALSA, we don't need to configure it because it's already done?

------------------------------

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

End of Alsa-devel Digest, Vol 18, Issue 45
******************************************

#1 lore raw

Re: Bug with ALC889A on MacPro, mistakenly treated as ALC885, details inside

Quoted 2 lines · S. Aguinaga

Stan,
Thank you for spending time to look at this issue. I owe you a drink, when you are in the chicago area let me know and I'll treat you to one.

Aaaaahhh! That was refreshing! ;-)

Quoted 2 lines

Ok, so I will check with the developers an see what can be done to correct this. Thank you.

You're welcome. We are on the developer's list, so I will change the subject to reflect that there was a bug. I was going to wait a day or two to see if anyone paid any attention, and then do it, but it won't hurt now.

Quoted 148 lines

//Salvador

1. Re: latest Mac Pro (quad core) audio issues (stan)

Message: 1
Date: Fri, 15 Aug 2008 15:14:12 -0700
From: stan <[email protected]>
Subject: Re: [alsa-devel] latest Mac Pro (quad core) audio issues
To: "S. Aguinaga" <[email protected]>
Cc: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Quoted 28 lines · S. Aguinaga

Hello Stan,

This is awesome I did find the problem it's listed in the /var/log/messages under ALSA.

1.   When I bring up the "Pulse Volume Control" gui, the first tab "Playback"  comes up empty, and grayed-out is "No Streams Available"
2.   aplay does not produce sound, period!
3.   Amrok's welcome sample does not produce sound out of the std tower speaker or the headphone jack.

I didn't notice anything strange on the output of the alsa-info.sh file, but when I checked the var/log/messages, this is what I found:

sudo cat /var/log/messages | grep ALSA

Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
Quoted 5 lines

Let me know if I should send something else.

// Salvador
// Northwestern University

I think your problem is a misidentification of your sound chip. The model being used for your 889A appears to be incompatible, thus all the errors above. It appears that the macpro ALC885 is being selected before it gets to the choice for the ALC889A. Perhaps a developer can look into this.

!!HDA-Intel Codec information
!!---------------------------

Codec: Realtek ALC889A

!!Aplay/Arecord output
!!------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC885 Analog [ALC885 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

One shows ALC889A and the other shows ALC885. In the driver code there is a comment to the effect that the 889A is best handled as an ALC888, yet the macpro is listed under the ALC885.

I am not a developer so can't go beyond this, but it seems that there is a problem. There should be a macpro under the ALC888 as well as the 885.

Here are the model options for the two candidates

ALC882/885
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
targa Targa T8, MSI-1049 T8
asus-a7j ASUS A7J
asus-a7m ASUS A7M
macpro MacPro support
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
auto auto-config reading BIOS (default)

ALC883/888
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
3stack-6ch 3-jack 6-channel
3stack-6ch-dig 3-jack 6-channel with SPDIF I/O 6stack-dig-demo 6-jack digital for Intel demo board
acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
acer-aspire Acer Aspire 9810
medion Medion Laptops
medion-md2 Medion MD2
targa-dig Targa/MSI
targa-2ch-dig Targs/MSI with 2-channel
laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
lenovo-101e Lenovo 101E
lenovo-nb0763 Lenovo NB0763
lenovo-ms7195-dig Lenovo MS7195
haier-w66 Haier W66
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
auto auto-config reading BIOS (default)

Quoted 1 line

From the code, here is the comment indicating it should be treated as

an ALC888:

if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
        /* Pick up systems that don't supply PCI SSID */
        switch (codec->subsystem_id) {
        case 0x106b0c00: /* Mac Pro */
            board_config = ALC885_MACPRO;
            break;
        case 0x106b1000: /* iMac 24 */
            board_config = ALC885_IMAC24;
            break;
        case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
        case 0x106b2c00: /* Macbook Pro rev3 */
        case 0x106b3600: /* Macbook 3.1 */
            board_config = ALC885_MBP3;
            break;
        default:
            /* ALC889A is handled better as ALC888-compatible */
            if (codec->revision_id == 0x100103) {
                alc_free(codec);
                return patch_alc883(codec);
            }
            printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
                            "trying auto-probe from BIOS...\n");
            board_config = ALC882_AUTO;
        }
    }
#2 lore raw
In reply to S. Aguinaga

At Sat, 16 Aug 2008 06:15:46 -0700 (PDT),

Quoted 11 lines · S. Aguinaga
Quoted 9 lines · S. Aguinaga

Hello Stan,

This is awesome I did find the problem it's listed in the /var/log/messages under ALSA.

1.   When I bring up the "Pulse Volume Control" gui, the first tab "Playback"  comes up empty, and grayed-out is "No Streams Available"
2.   aplay does not produce sound, period!
3.   Amrok's welcome sample does not produce sound out of the std tower speaker or the headphone jack.
Quoted 6 lines
Quoted 6 lines

I didn't notice anything strange on the output of the alsa-info.sh file, but when I checked the var/log/messages, this is what I found:

sudo cat /var/log/messages | grep ALSA

Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
Aug 11 07:52:10 macprolinx kernel: ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped

(snip)

These messages are harmless. It's just information from the driver, enabled only when you build it with CONFIG_SND_DEBUG_VERBOSE=y.

Quoted 5 lines

I think your problem is a misidentification of your sound chip. The model being used for your 889A appears to be incompatible, thus all the errors above. It appears that the macpro ALC885 is being selected before it gets to the choice for the ALC889A. Perhaps a developer can look into this.

Well, ALC882, ALC885 and ALC889A are almost compatible. In the driver, they are all handled in the same routine.

There are a few models for intel macs with ALC88x. Try to specify either model=macpro, model=mbp3 or model=imac24 as the module option of snd-hda-intel driver.

Takashi