Skip to contentSkip to conversation

noname PCMCIA TV-Tuner Card - no tv ?

DISCUSSION A. Fichtner 2 participants 4 messages Aug 18, 2008 – Aug 19, 2008 2 messages not in the archive Media (V4L/DVB)

lore
Share & tools
lore

A. Fichtner

author
#0 lore raw

Hello!

I have some trouble to get my new TV-Card installed.

The documentation says it has a philips *tda8275a, tda8290 new silicon tuner* google means that it is a hybrid card.

dmesg says the following:

[ 8847.678136] pccard: CardBus card inserted into slot 0
[ 8847.678260] yenta EnE: chaning testregister 0xC9, 44 -> 44
[ 3538.107500] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 3538.107990] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 3538.108259] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 3538.108273] saa7133[0]: found at 0000:02:00.0, rev: 16, irq: 11, latency: 0, mmio: 0x34000000
[ 3538.108282] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3538.108288] saa7133[0]: subsystem: 1132:2004, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 3538.108301] saa7133[0]: board init: gpio is 0
[ 3538.108310] saa7133[0]: gpio: mode=0x0000000 in=0x0000000 out=0x0000000 [pre-init]
[ 3538.210612] saa7133[0]: i2c xfer: < 20 ERROR: NO_DEVICE
[ 3538.211153] saa7133[0]: i2c xfer: < 84 ERROR: NO_DEVICE
[ 3538.211474] saa7133[0]: i2c xfer: < 86 ERROR: NO_DEVICE
[ 3538.211791] saa7133[0]: i2c xfer: < 94 ERROR: NO_DEVICE
[ 3538.212160] saa7133[0]: i2c xfer: < 96 >
[ 3538.218890] saa7133[0]: i2c xfer: < 96 00 >
[ 3538.226599] saa7133[0]: i2c xfer: < 97 =01 =01 =00 =11 =01 =04 =01 =85 >
[ 3538.234599] saa7133[0]: i2c xfer: < 96 1f >
[ 3538.242589] saa7133[0]: i2c xfer: < 97 =89 >
[ 3538.250532] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 3538.250812] tuner' i2c attach [addr=0x4b,client=tuner']
[ 3538.250986] saa7133[0]: i2c xfer: < c0 ERROR: NO_DEVICE
.
.
.
[ 3538.255805] saa7133[0]: i2c xfer: < de ERROR: NO_DEVICE
[ 3538.256145] saa7133[0]: i2c xfer: < a0 00 >
[ 3538.262577] saa7133[0]: i2c xfer: < a1 =32 =11 =04 =20 =54 =20 =1c =00 =43 =43 =a9 =1c =55 =d2 =b2 =92 =00 =00 =f0 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =01 =40 =01 =02 =02 =01 =01 =03 =08 =ff =00 =1d =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =22 =00 =c2 =96 =ff =02 =30 =15 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 >
[ 3538.302466] saa7133[0]: i2c eeprom 00: 32 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 3538.302478] saa7133[0]: i2c eeprom 10: 00 00 f0 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 3538.302486] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 1d ff ff ff ff
[ 3538.302494] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 3538.302502] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff ff ff ff ff ff ff
[ 3538.302510] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 3538.302518] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 3538.302525] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 3538.302533] saa7133[0]: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302541] saa7133[0]: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302548] saa7133[0]: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302555] saa7133[0]: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302563] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302570] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302578] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.302585] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3538.305263] saa7133[0]: i2c xfer: < 01 ERROR: NO_DEVICE
.
.
.
[ 3538.328512] saa7133[0]: i2c xfer: < 95 ERROR: NO_DEVICE
[ 3538.328825] saa7133[0]: i2c xfer: < 97 >
[ 3538.334431] saa7133[0]: i2c scan: found device @ 0x96  [???]
[ 3538.334681] saa7133[0]: i2c xfer: < 99 ERROR: NO_DEVICE
[ 3538.334996] saa7133[0]: i2c xfer: < 9b ERROR: NO_DEVICE
[ 3538.335307] saa7133[0]: i2c xfer: < 9d ERROR: NO_DEVICE
[ 3538.335620] saa7133[0]: i2c xfer: < 9f ERROR: NO_DEVICE
[ 3538.335932] saa7133[0]: i2c xfer: < a1 >
[ 3538.342422] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[ 3538.342645] saa7133[0]: i2c xfer: < a3 ERROR: NO_DEVICE
.
.
.
[ 3538.357086] saa7133[0]: i2c xfer: < ff ERROR: NO_DEVICE
[ 3538.357656] saa7133[0]/audio: sound IF not in use, skipping scan
[ 3538.382884] saa7133[0]: registered device video0 [v4l2]
[ 3538.383483] saa7133[0]: registered device vbi0
[ 3538.474259] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[ 3538.474273] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[ 3538.474550] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[ 3538.474554] saa7134_alsa: Unknown symbol saa_dsp_writel
[ 3538.474739] saa7134_alsa: disagrees about version of symbol videobuf_dma_free
[ 3538.474742] saa7134_alsa: Unknown symbol videobuf_dma_free
[ 3538.474945] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_alloc
[ 3538.474948] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[ 3538.474992] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_build
[ 3538.474994] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[ 3538.475031] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_free
[ 3538.475035] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[ 3538.475072] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[ 3538.475075] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[ 3538.475221] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[ 3538.475224] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[ 3538.475327] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[ 3538.475330] saa7134_alsa: Unknown symbol videobuf_dma_init
[ 3538.475488] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[ 3538.475491] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[ 3538.475646] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[ 3538.475810] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[ 3538.475854] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[ 3538.475857] saa7134_alsa: Unknown symbol saa7134_set_dmabits

"lsmod |grep saa" says the following:

saa7134               148052  0
tveeprom               13444  1 saa7134
ir_common              42244  1 saa7134
videodev               36864  2 saa7134,tuner
compat_ioctl32          2304  1 saa7134
v4l2_common            13952  2 saa7134,tuner
videobuf_dma_sg        14980  1 saa7134
videobuf_core          19716  3 saa7134,videobuf_dvb,videobuf_dma_sg
i2c_core               24832  11 saa7134,tda1004x,tda827x,tda8290,tveeprom,tuner_simple,tuner,v4l2_common,i2c_viapro,i2c_prosavage,i2c_algo_bit

Windows-Driver:
Named as "Philips SAA713x BDA Capture Driver"

Can anyone give me a suggestion what drivers i need to load? What card= - insmod options can work?

Thank you.

A. Fichtner

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#1 lore raw

Hi,

Am Montag, den 18.08.2008, 18:09 +0200 schrieb A. Fichtner:

Quoted 156 lines

Hello!

I have some trouble to get my new TV-Card installed.

The documentation says it has a philips *tda8275a, tda8290 new silicon tuner*
google means that it is a hybrid card.

dmesg says the following:

[ 8847.678136] pccard: CardBus card inserted into slot 0
[ 8847.678260] yenta EnE: chaning testregister 0xC9, 44 -> 44
[ 3538.107500] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 3538.107990] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 3538.108259] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 
11 (level, low) -> IRQ 11
[ 3538.108273] saa7133[0]: found at 0000:02:00.0, rev: 16, irq: 11, 
latency: 0, mmio: 0x34000000
[ 3538.108282] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3538.108288] saa7133[0]: subsystem: 1132:2004, board: UNKNOWN/GENERIC 
[card=0,autodetected]
[ 3538.108301] saa7133[0]: board init: gpio is 0
[ 3538.108310] saa7133[0]: gpio: mode=0x0000000 in=0x0000000 
out=0x0000000 [pre-init]
[ 3538.210612] saa7133[0]: i2c xfer: < 20 ERROR: NO_DEVICE
[ 3538.211153] saa7133[0]: i2c xfer: < 84 ERROR: NO_DEVICE
[ 3538.211474] saa7133[0]: i2c xfer: < 86 ERROR: NO_DEVICE
[ 3538.211791] saa7133[0]: i2c xfer: < 94 ERROR: NO_DEVICE
[ 3538.212160] saa7133[0]: i2c xfer: < 96 >
[ 3538.218890] saa7133[0]: i2c xfer: < 96 00 >
[ 3538.226599] saa7133[0]: i2c xfer: < 97 =01 =01 =00 =11 =01 =04 =01 =85 >
[ 3538.234599] saa7133[0]: i2c xfer: < 96 1f >
[ 3538.242589] saa7133[0]: i2c xfer: < 97 =89 >
[ 3538.250532] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 3538.250812] tuner' i2c attach [addr=0x4b,client=tuner']
[ 3538.250986] saa7133[0]: i2c xfer: < c0 ERROR: NO_DEVICE
.
.
.
[ 3538.255805] saa7133[0]: i2c xfer: < de ERROR: NO_DEVICE
[ 3538.256145] saa7133[0]: i2c xfer: < a0 00 >
[ 3538.262577] saa7133[0]: i2c xfer: < a1 =32 =11 =04 =20 =54 =20 =1c

=00 =43 =43 =a9 =1c =55 =d2 =b2 =92 =00 =00 =f0 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =01 =40 =01 =02 =02 =01 =01 =03 =08 =ff =00 =1d =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =22 =00 =c2 =96 =ff =02 =30 =15 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 >

[ 3538.302466] saa7133[0]: i2c eeprom 00: 32 11 04 20 54 20 1c 00 43 43 
a9 1c 55 d2 b2 92
[ 3538.302478] saa7133[0]: i2c eeprom 10: 00 00 f0 0f ff 20 ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302486] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 
00 1d ff ff ff ff
[ 3538.302494] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302502] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff 
ff ff ff ff ff ff
[ 3538.302510] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302518] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302525] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302533] saa7133[0]: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302541] saa7133[0]: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302548] saa7133[0]: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302555] saa7133[0]: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302563] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302570] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302578] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302585] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.305263] saa7133[0]: i2c xfer: < 01 ERROR: NO_DEVICE
.
.
.
[ 3538.328512] saa7133[0]: i2c xfer: < 95 ERROR: NO_DEVICE
[ 3538.328825] saa7133[0]: i2c xfer: < 97 >
[ 3538.334431] saa7133[0]: i2c scan: found device @ 0x96  [???]
[ 3538.334681] saa7133[0]: i2c xfer: < 99 ERROR: NO_DEVICE
[ 3538.334996] saa7133[0]: i2c xfer: < 9b ERROR: NO_DEVICE
[ 3538.335307] saa7133[0]: i2c xfer: < 9d ERROR: NO_DEVICE
[ 3538.335620] saa7133[0]: i2c xfer: < 9f ERROR: NO_DEVICE
[ 3538.335932] saa7133[0]: i2c xfer: < a1 >
[ 3538.342422] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[ 3538.342645] saa7133[0]: i2c xfer: < a3 ERROR: NO_DEVICE
.
.
.
[ 3538.357086] saa7133[0]: i2c xfer: < ff ERROR: NO_DEVICE
[ 3538.357656] saa7133[0]/audio: sound IF not in use, skipping scan
[ 3538.382884] saa7133[0]: registered device video0 [v4l2]
[ 3538.383483] saa7133[0]: registered device vbi0
[ 3538.474259] saa7134_alsa: disagrees about version of symbol 
saa7134_tvaudio_setmute
[ 3538.474273] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[ 3538.474550] saa7134_alsa: disagrees about version of symbol 
saa_dsp_writel
[ 3538.474554] saa7134_alsa: Unknown symbol saa_dsp_writel
[ 3538.474739] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_free
[ 3538.474742] saa7134_alsa: Unknown symbol videobuf_dma_free
[ 3538.474945] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_alloc
[ 3538.474948] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[ 3538.474992] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_build
[ 3538.474994] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[ 3538.475031] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_free
[ 3538.475035] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[ 3538.475072] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_init
[ 3538.475075] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[ 3538.475221] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_exit
[ 3538.475224] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[ 3538.475327] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init
[ 3538.475330] saa7134_alsa: Unknown symbol videobuf_dma_init
[ 3538.475488] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init_kernel
[ 3538.475491] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[ 3538.475646] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[ 3538.475810] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[ 3538.475854] saa7134_alsa: disagrees about version of symbol 
saa7134_set_dmabits
[ 3538.475857] saa7134_alsa: Unknown symbol saa7134_set_dmabits

"lsmod |grep saa" says the following:

saa7134               148052  0
tveeprom               13444  1 saa7134
ir_common              42244  1 saa7134
videodev               36864  2 saa7134,tuner
compat_ioctl32          2304  1 saa7134
v4l2_common            13952  2 saa7134,tuner
videobuf_dma_sg        14980  1 saa7134
videobuf_core          19716  3 saa7134,videobuf_dvb,videobuf_dma_sg
i2c_core               24832  11
Quoted 8 lines

saa7134,tda1004x,tda827x,tda8290,tveeprom,tuner_simple,tuner,v4l2_common,i2c_viapro,i2c_prosavage,i2c_algo_bit

Windows-Driver:
Named as "Philips SAA713x BDA Capture Driver"

Can anyone give me a suggestion what drivers i need to load? What card=
- insmod options can work?

the saa7134 is correct and you likely might get it to work.

A good and simple start is to test with card=39 tuner=54.

If it has a radio antenna input too, card=65 tuner=54 might be close.

Quoted 1 line

From the i2c scan and from the eeprom it seems not to have a digital

channel decoder.

For testing sound you need saa7134-alsa in a proper state.

You can read here and on other places how you might achieve that.
http://www.linuxtv.org/pipermail/linux-dvb/2008-August/027910.html

You can also find something about how to use it then on the v4l wiki at linuxtv.org.

The saa713x chips have two possible clocks/xtals for the audio. Try README.saa7134 and "modinfo saa7134".

With the saa7134 option audio_clock_override= you can change the cards defaults. Card=39 has 0x00200000 and card=65 the other possible value of 0x00187de7. A wrong clock produces noise only.

Have a look at saa7134-cards.c and saa7134.h for known other cards and different configurations with tuner=54. In case it should have radio, some switch the other way round.

On many cardbus devices the power for the tuner must be enabled with a GPIO pin of the saa713x, some also have a fan that needs to be turned on.

If you don't get a start such easily, you might consider to dig deeper into it.

Cheers,
Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

Am Dienstag, den 19.08.2008, 10:20 +0200 schrieb A. Fichtner:

Quoted 581 lines
Quoted 216 lines · hermann pitton

Hi,

Am Montag, den 18.08.2008, 18:09 +0200 schrieb A. Fichtner:

Quoted 156 lines

Hello!

I have some trouble to get my new TV-Card installed.

The documentation says it has a philips *tda8275a, tda8290 new silicon tuner*
google means that it is a hybrid card.

dmesg says the following:

[ 8847.678136] pccard: CardBus card inserted into slot 0
[ 8847.678260] yenta EnE: chaning testregister 0xC9, 44 -> 44
[ 3538.107500] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 3538.107990] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 3538.108259] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 
11 (level, low) -> IRQ 11
[ 3538.108273] saa7133[0]: found at 0000:02:00.0, rev: 16, irq: 11, 
latency: 0, mmio: 0x34000000
[ 3538.108282] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3538.108288] saa7133[0]: subsystem: 1132:2004, board: UNKNOWN/GENERIC 
[card=0,autodetected]
[ 3538.108301] saa7133[0]: board init: gpio is 0
[ 3538.108310] saa7133[0]: gpio: mode=0x0000000 in=0x0000000 
out=0x0000000 [pre-init]
[ 3538.210612] saa7133[0]: i2c xfer: < 20 ERROR: NO_DEVICE
[ 3538.211153] saa7133[0]: i2c xfer: < 84 ERROR: NO_DEVICE
[ 3538.211474] saa7133[0]: i2c xfer: < 86 ERROR: NO_DEVICE
[ 3538.211791] saa7133[0]: i2c xfer: < 94 ERROR: NO_DEVICE
[ 3538.212160] saa7133[0]: i2c xfer: < 96 >
[ 3538.218890] saa7133[0]: i2c xfer: < 96 00 >
[ 3538.226599] saa7133[0]: i2c xfer: < 97 =01 =01 =00 =11 =01 =04 =01 =85 >
[ 3538.234599] saa7133[0]: i2c xfer: < 96 1f >
[ 3538.242589] saa7133[0]: i2c xfer: < 97 =89 >
[ 3538.250532] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 3538.250812] tuner' i2c attach [addr=0x4b,client=tuner']
[ 3538.250986] saa7133[0]: i2c xfer: < c0 ERROR: NO_DEVICE
.
.
.
[ 3538.255805] saa7133[0]: i2c xfer: < de ERROR: NO_DEVICE
[ 3538.256145] saa7133[0]: i2c xfer: < a0 00 >
[ 3538.262577] saa7133[0]: i2c xfer: < a1 =32 =11 =04 =20 =54 =20 =1c

=00 =43 =43 =a9 =1c =55 =d2 =b2 =92 =00 =00 =f0 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =01 =40 =01 =02 =02 =01 =01 =03 =08 =ff =00 =1d =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =22 =00 =c2 =96 =ff =02 =30 =15 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 >

[ 3538.302466] saa7133[0]: i2c eeprom 00: 32 11 04 20 54 20 1c 00 43 43 
a9 1c 55 d2 b2 92
[ 3538.302478] saa7133[0]: i2c eeprom 10: 00 00 f0 0f ff 20 ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302486] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 
00 1d ff ff ff ff
[ 3538.302494] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302502] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff 
ff ff ff ff ff ff
[ 3538.302510] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302518] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302525] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 3538.302533] saa7133[0]: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302541] saa7133[0]: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302548] saa7133[0]: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302555] saa7133[0]: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302563] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302570] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302578] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.302585] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 3538.305263] saa7133[0]: i2c xfer: < 01 ERROR: NO_DEVICE
.
.
.
[ 3538.328512] saa7133[0]: i2c xfer: < 95 ERROR: NO_DEVICE
[ 3538.328825] saa7133[0]: i2c xfer: < 97 >
[ 3538.334431] saa7133[0]: i2c scan: found device @ 0x96  [???]
[ 3538.334681] saa7133[0]: i2c xfer: < 99 ERROR: NO_DEVICE
[ 3538.334996] saa7133[0]: i2c xfer: < 9b ERROR: NO_DEVICE
[ 3538.335307] saa7133[0]: i2c xfer: < 9d ERROR: NO_DEVICE
[ 3538.335620] saa7133[0]: i2c xfer: < 9f ERROR: NO_DEVICE
[ 3538.335932] saa7133[0]: i2c xfer: < a1 >
[ 3538.342422] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[ 3538.342645] saa7133[0]: i2c xfer: < a3 ERROR: NO_DEVICE
.
.
.
[ 3538.357086] saa7133[0]: i2c xfer: < ff ERROR: NO_DEVICE
[ 3538.357656] saa7133[0]/audio: sound IF not in use, skipping scan
[ 3538.382884] saa7133[0]: registered device video0 [v4l2]
[ 3538.383483] saa7133[0]: registered device vbi0
[ 3538.474259] saa7134_alsa: disagrees about version of symbol 
saa7134_tvaudio_setmute
[ 3538.474273] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[ 3538.474550] saa7134_alsa: disagrees about version of symbol 
saa_dsp_writel
[ 3538.474554] saa7134_alsa: Unknown symbol saa_dsp_writel
[ 3538.474739] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_free
[ 3538.474742] saa7134_alsa: Unknown symbol videobuf_dma_free
[ 3538.474945] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_alloc
[ 3538.474948] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[ 3538.474992] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_build
[ 3538.474994] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[ 3538.475031] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_free
[ 3538.475035] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[ 3538.475072] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_init
[ 3538.475075] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[ 3538.475221] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_exit
[ 3538.475224] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[ 3538.475327] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init
[ 3538.475330] saa7134_alsa: Unknown symbol videobuf_dma_init
[ 3538.475488] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init_kernel
[ 3538.475491] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[ 3538.475646] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[ 3538.475810] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[ 3538.475854] saa7134_alsa: disagrees about version of symbol 
saa7134_set_dmabits
[ 3538.475857] saa7134_alsa: Unknown symbol saa7134_set_dmabits

"lsmod |grep saa" says the following:

saa7134               148052  0
tveeprom               13444  1 saa7134
ir_common              42244  1 saa7134
videodev               36864  2 saa7134,tuner
compat_ioctl32          2304  1 saa7134
v4l2_common            13952  2 saa7134,tuner
videobuf_dma_sg        14980  1 saa7134
videobuf_core          19716  3 saa7134,videobuf_dvb,videobuf_dma_sg
i2c_core               24832  11
Quoted 9 lines

saa7134,tda1004x,tda827x,tda8290,tveeprom,tuner_simple,tuner,v4l2_common,i2c_viapro,i2c_prosavage,i2c_algo_bit

Windows-Driver:
Named as "Philips SAA713x BDA Capture Driver"

Can anyone give me a suggestion what drivers i need to load? What card=
- insmod options can work?

the saa7134 is correct and you likely might get it to work.

A good and simple start is to test with card=39 tuner=54.

If it has a radio antenna input too, card=65 tuner=54 might be close.

Quoted 1 line

From the i2c scan and from the eeprom it seems not to have a digital

channel decoder.

For testing sound you need saa7134-alsa in a proper state.

You can read here and on other places how you might achieve that.
http://www.linuxtv.org/pipermail/linux-dvb/2008-August/027910.html

You can also find something about how to use it then on the v4l wiki at linuxtv.org.

The saa713x chips have two possible clocks/xtals for the audio. Try README.saa7134 and "modinfo saa7134".

With the saa7134 option audio_clock_override= you can change the cards defaults. Card=39 has 0x00200000 and card=65 the other possible value of 0x00187de7. A wrong clock produces noise only.

Have a look at saa7134-cards.c and saa7134.h for known other cards and different configurations with tuner=54. In case it should have radio, some switch the other way round.

On many cardbus devices the power for the tuner must be enabled with a GPIO pin of the saa713x, some also have a fan that needs to be turned on.

If you don't get a start such easily, you might consider to dig deeper into it.

Cheers,
Hermann

Quoted 7 lines

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Hello!

I've tried card=39 and some other values like card=22 in cobination with tuner=54

here is a dmesg-log:

[62175.374306] pccard: CardBus card inserted into slot 0
[62175.374430] yenta EnE: chaning testregister 0xC9, 44 -> 44
[62176.046010] saa7130/34: v4l2 driver version 0.2.14 loaded
[62176.046928] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[62176.047368] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 
11 (level, low) -> IRQ 11
[62176.047394] saa7133[0]: found at 0000:02:00.0, rev: 16, irq: 11, 
latency: 0, mmio: 0x34000000
[62176.047408] PCI: Setting latency timer of device 0000:02:00.0 to 64
[62176.047421] saa7133[0]: subsystem: 1132:2004, board: LifeView FlyTV 
Platinum Mini [card=39,insmod option]
[62176.047444] saa7133[0]: board init: gpio is 0
[62176.047456] saa7133[0]: gpio: mode=0x0000000 in=0x0000000 
out=0x0000000 [pre-init]
[62176.150166] saa7133[0]: i2c xfer: < a0 00 >
[62176.158353] saa7133[0]: i2c xfer: < a1 =32 =11 =04 =20 =54 =20 =1c

=00 =43 =43 =a9 =1c =55 =d2 =b2 =92 =00 =00 =f0 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =01 =40 =01 =02 =02 =01 =01 =03 =08 =ff =00 =1d =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =22 =00 =c2 =96 =ff =02 =30 =15 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 >

[62176.198232] saa7133[0]: i2c eeprom 00: 32 11 04 20 54 20 1c 00 43 43 
a9 1c 55 d2 b2 92
[62176.198257] saa7133[0]: i2c eeprom 10: 00 00 f0 0f ff 20 ff ff ff ff 
ff ff ff ff ff ff
[62176.198278] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 
00 1d ff ff ff ff
[62176.198297] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[62176.198317] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff 
ff ff ff ff ff ff
[62176.198336] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[62176.198355] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[62176.198375] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[62176.198394] saa7133[0]: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198413] saa7133[0]: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198431] saa7133[0]: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198450] saa7133[0]: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198468] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198487] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198506] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.198525] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[62176.205219] saa7133[0]: i2c xfer: < 01 ERROR: NO_DEVICE
[62176.256752] saa7133[0]: i2c xfer: < 97 >
[62176.261986] saa7133[0]: i2c scan: found device @ 0x96  [???]
[62176.263991] saa7133[0]: i2c xfer: < a1 >
[62176.269977] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[62176.396596] saa7133[0]: i2c xfer: < 96 >
[62176.552405] saa7133[0]: i2c xfer: < 96 00 >
[62176.557873] saa7133[0]: i2c xfer: < 97 =01 =01 =00 =11 =01 =04 =01 =85 >
[62176.565885] saa7133[0]: i2c xfer: < 96 1f >
[62176.573861] saa7133[0]: i2c xfer: < 97 =89 >
[62176.582033] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[62176.582119] tuner' i2c attach [addr=0x4b,client=tuner']
[62176.584970] saa7133[0]: i2c xfer: < 96 1f >
[62176.590368] saa7133[0]: i2c xfer: < 97 =89 >
[62176.597898] saa7133[0]: i2c xfer: < 96 2f >
[62176.605849] saa7133[0]: i2c xfer: < 97 =00 >
[62176.613846] saa7133[0]: i2c xfer: < 96 21 c0 >
[62176.645840] saa7133[0]: i2c xfer: < c1 ERROR: NO_DEVICE
[62176.646004] saa7133[0]: i2c xfer: < c3 =88 >
[62176.653846] saa7133[0]: i2c xfer: < c5 ERROR: NO_DEVICE
[62176.653994] saa7133[0]: i2c xfer: < c7 ERROR: NO_DEVICE
[62176.654139] saa7133[0]: i2c xfer: < 96 21 00 >
[62176.661843] tda829x 2-004b: setting tuner address to 61
[62176.661851] saa7133[0]: i2c xfer: < 96 21 c0 >
[62176.693820] saa7133[0]: i2c xfer: < c3 =08 >
[62176.819741] saa7133[0]: i2c xfer: < c3 =08 >
[62176.826892] saa7133[0]: i2c xfer: < c2 30 90 >
[62176.833826] saa7133[0]: i2c xfer: < 96 21 00 >
[62176.841767] tda829x 2-004b: type set to tda8290+75a
[62176.841775] saa7133[0]: i2c xfer: < 96 21 c0 >
[62176.873758] saa7133[0]: i2c xfer: < c2 00 00 00 00 dc 05 8b 0c 04 20 
ff 00 00 4b >
[62176.881760] saa7133[0]: i2c xfer: < 96 21 00 >
[62176.889760] saa7133[0]: i2c xfer: < 96 20 0b >
[62176.897747] saa7133[0]: i2c xfer: < 96 30 6f >
[62176.905802] saa7133[0]: i2c xfer: < 96 01 00 >
[62176.913754] saa7133[0]: i2c xfer: < 96 02 00 >
[62176.921748] saa7133[0]: i2c xfer: < 96 00 00 >
[62176.937727] saa7133[0]: i2c xfer: < 96 01 90 >
[62176.945729] saa7133[0]: i2c xfer: < 96 28 14 >
[62176.953739] saa7133[0]: i2c xfer: < 96 0f 88 >
[62176.961734] saa7133[0]: i2c xfer: < 96 05 04 >
[62176.969713] saa7133[0]: i2c xfer: < 96 0d 47 >
[62176.977729] saa7133[0]: i2c xfer: < 96 21 c0 >
[62177.025700] saa7133[0]: i2c xfer: < c2 00 32 f8 00 16 3b bb 1c 04 20 00 >
[62177.033742] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[62177.041706] saa7133[0]: i2c xfer: < c2 a0 c0 >
[62177.049704] saa7133[0]: i2c xfer: < c2 30 10 >
[62177.057700] saa7133[0]: i2c xfer: < c3 =09 =a9 >
[62177.171912] saa7133[0]: i2c xfer: < c2 60 3c >
[62177.347113] saa7133[0]: i2c xfer: < c2 50 bf >
[62177.353605] saa7133[0]: i2c xfer: < c2 80 28 >
[62177.361589] saa7133[0]: i2c xfer: < c2 b0 01 >
[62177.369585] saa7133[0]: i2c xfer: < c2 c0 19 >
[62177.377593] saa7133[0]: i2c xfer: < 96 1b >
[62177.385591] saa7133[0]: i2c xfer: < 97 =63 >
[62177.497545] saa7133[0]: i2c xfer: < 96 1b >
[62177.505546] saa7133[0]: i2c xfer: < 97 =5b >
[62177.617523] saa7133[0]: i2c xfer: < 96 1b >
[62177.628981] saa7133[0]: i2c xfer: < 97 =52 >
[62177.737477] saa7133[0]: i2c xfer: < 96 28 64 >
[62177.849471] saa7133[0]: i2c xfer: < 96 1d >
[62177.857421] saa7133[0]: i2c xfer: < 97 =ba >
[62177.865417] saa7133[0]: i2c xfer: < 96 1b >
[62177.873409] saa7133[0]: i2c xfer: < 97 =43 >
[62177.881419] saa7133[0]: i2c xfer: < c2 80 2c >
[62177.993382] saa7133[0]: i2c xfer: < 96 1d >
[62178.001370] saa7133[0]: i2c xfer: < 97 =56 >
[62178.009370] saa7133[0]: i2c xfer: < 96 1b >
[62178.017363] saa7133[0]: i2c xfer: < 97 =3b >
[62178.028948] saa7133[0]: i2c xfer: < 96 05 01 >
[62178.037368] saa7133[0]: i2c xfer: < 96 0d 27 >
[62178.149310] saa7133[0]: i2c xfer: < 96 21 00 >
[62178.157316] saa7133[0]: i2c xfer: < 96 0f 81 >
[62178.165545] saa7133[0]: i2c xfer: < 96 01 10 >
[62178.173506] saa7133[0]: i2c xfer: < 96 02 00 >
[62178.181511] saa7133[0]: i2c xfer: < 96 00 00 >
[62178.197421] saa7133[0]: i2c xfer: < 96 01 82 >
[62178.205686] saa7133[0]: i2c xfer: < 96 28 14 >
[62178.213507] saa7133[0]: i2c xfer: < 96 0f 88 >
[62178.221498] saa7133[0]: i2c xfer: < 96 05 04 >
[62178.229748] saa7133[0]: i2c xfer: < 96 0d 47 >
[62178.237500] saa7133[0]: i2c xfer: < 96 21 c0 >
[62178.285268] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[62178.293471] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[62178.301473] saa7133[0]: i2c xfer: < c2 a0 c0 >
[62178.309464] saa7133[0]: i2c xfer: < c2 30 10 >
[62178.317468] saa7133[0]: i2c xfer: < c3 =09 =a9 >
[62178.429343] saa7133[0]: i2c xfer: < c2 60 3c >
[62178.605177] saa7133[0]: i2c xfer: < c2 50 bf >
[62178.613414] saa7133[0]: i2c xfer: < c2 80 28 >
[62178.621352] saa7133[0]: i2c xfer: < c2 b0 01 >
[62178.629612] saa7133[0]: i2c xfer: < c2 c0 19 >
[62178.637353] saa7133[0]: i2c xfer: < 96 1b >
[62178.645341] saa7133[0]: i2c xfer: < 97 =5e >
[62178.757099] saa7133[0]: i2c xfer: < 96 1b >
[62178.765454] saa7133[0]: i2c xfer: < 97 =56 >
[62178.877057] saa7133[0]: i2c xfer: < 96 1b >
[62178.885426] saa7133[0]: i2c xfer: < 97 =4c >
[62178.997008] saa7133[0]: i2c xfer: < 96 28 64 >
[62179.108975] saa7133[0]: i2c xfer: < 96 1d >
[62179.117349] saa7133[0]: i2c xfer: < 97 =bb >
[62179.125273] saa7133[0]: i2c xfer: < 96 1b >
[62179.133298] saa7133[0]: i2c xfer: < 97 =37 >
[62179.141152] saa7133[0]: i2c xfer: < c2 80 2c >
[62179.252930] saa7133[0]: i2c xfer: < 96 1d >
[62179.261338] saa7133[0]: i2c xfer: < 97 =56 >
[62179.269197] saa7133[0]: i2c xfer: < 96 1b >
[62179.277155] saa7133[0]: i2c xfer: < 97 =2e >
[62179.285110] saa7133[0]: i2c xfer: < 96 05 01 >
[62179.293107] saa7133[0]: i2c xfer: < 96 0d 27 >
[62179.404866] saa7133[0]: i2c xfer: < 96 21 00 >
[62179.413258] saa7133[0]: i2c xfer: < 96 0f 81 >
[62179.421301] saa7133[0]: i2c xfer: < 96 01 02 >
[62179.429301] saa7133[0]: i2c xfer: < 96 02 00 >
[62179.437068] saa7133[0]: i2c xfer: < 96 00 00 >
[62179.452851] saa7133[0]: i2c xfer: < 96 01 82 >
[62179.461053] saa7133[0]: i2c xfer: < 96 28 14 >
[62179.469051] saa7133[0]: i2c xfer: < 96 0f 88 >
[62179.477047] saa7133[0]: i2c xfer: < 96 05 04 >
[62179.485045] saa7133[0]: i2c xfer: < 96 0d 47 >
[62179.493033] saa7133[0]: i2c xfer: < 96 21 c0 >
[62179.540818] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[62179.549018] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[62179.557020] saa7133[0]: i2c xfer: < c2 a0 c0 >
[62179.565016] saa7133[0]: i2c xfer: < c2 30 10 >
[62179.573014] saa7133[0]: i2c xfer: < c3 =09 =a9 >
[62179.684781] saa7133[0]: i2c xfer: < c2 60 3c >
[62179.860715] saa7133[0]: i2c xfer: < c2 50 bf >
[62179.869082] saa7133[0]: i2c xfer: < c2 80 28 >
[62179.876913] saa7133[0]: i2c xfer: < c2 b0 01 >
[62179.884902] saa7133[0]: i2c xfer: < c2 c0 19 >
[62179.892902] saa7133[0]: i2c xfer: < 96 1b >
[62179.900893] saa7133[0]: i2c xfer: < 97 =60 >
[62180.012661] saa7133[0]: i2c xfer: < 96 1b >
[62180.021035] saa7133[0]: i2c xfer: < 97 =58 >
[62180.132736] saa7133[0]: i2c xfer: < 96 1b >
[62180.140954] saa7133[0]: i2c xfer: < 97 =4e >
[62180.252580] saa7133[0]: i2c xfer: < 96 28 64 >
[62180.364540] saa7133[0]: i2c xfer: < 96 1d >
[62180.372917] saa7133[0]: i2c xfer: < 97 =bb >
[62180.380735] saa7133[0]: i2c xfer: < 96 1b >
[62180.388745] saa7133[0]: i2c xfer: < 97 =3b >
[62180.396718] saa7133[0]: i2c xfer: < c2 80 2c >
[62180.508482] saa7133[0]: i2c xfer: < 96 1d >
[62180.516861] saa7133[0]: i2c xfer: < 97 =56 >
[62180.524679] saa7133[0]: i2c xfer: < 96 1b >
[62180.532675] saa7133[0]: i2c xfer: < 97 =3b >
[62180.540670] saa7133[0]: i2c xfer: < 96 05 01 >
[62180.548661] saa7133[0]: i2c xfer: < 96 0d 27 >
[62180.660431] saa7133[0]: i2c xfer: < 96 21 00 >
[62180.668798] saa7133[0]: i2c xfer: < 96 0f 81 >
[62180.676922] saa7133[0]/audio: tvaudio thread scan start [1]
[62180.676934] saa7133[0]/audio: scanning: B/G D/K I
[62180.696144] saa7133[0]: registered device video0 [v4l2]
[62180.697350] saa7133[0]: registered device vbi0
[62180.697899] saa7133[0]: i2c xfer: < 96 21 c0 >
[62180.732390] saa7133[0]: i2c xfer: < c2 30 90 >
[62180.740387] saa7133[0]: i2c xfer: < 96 21 00 >
[62180.748902] saa7133[0]: i2c xfer: < 96 02 20 >
[62180.756375] saa7133[0]: i2c xfer: < 96 00 02 >
[62180.879535] saa7134_alsa: disagrees about version of symbol 
saa7134_tvaudio_setmute
[62180.879557] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[62180.879990] saa7134_alsa: disagrees about version of symbol 
saa_dsp_writel
[62180.879997] saa7134_alsa: Unknown symbol saa_dsp_writel
[62180.880506] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_free
[62180.880513] saa7134_alsa: Unknown symbol videobuf_dma_free
[62180.881001] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_alloc
[62180.881008] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[62180.881118] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_build
[62180.881125] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[62180.881218] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_free
[62180.881225] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[62180.881320] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_init
[62180.881327] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[62180.881682] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_exit
[62180.881689] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[62180.881937] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init
[62180.881943] saa7134_alsa: Unknown symbol videobuf_dma_init
[62180.882322] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init_kernel
[62180.882329] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[62180.882668] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[62180.883065] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[62180.883176] saa7134_alsa: disagrees about version of symbol 
saa7134_set_dmabits
[62180.883183] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[62180.995598] saa7133[0]: i2c xfer: < 96 01 02 >
[62181.012389] saa7133[0]: i2c xfer: < 96 02 00 >
[62181.020713] saa7133[0]: i2c xfer: < 96 00 00 >
[62181.036851] saa7133[0]: i2c xfer: < 96 01 82 >
[62181.044320] saa7133[0]: i2c xfer: < 96 28 14 >
[62181.052315] saa7133[0]: i2c xfer: < 96 0f 88 >
[62181.060277] saa7133[0]: i2c xfer: < 96 05 04 >
[62181.068282] saa7133[0]: i2c xfer: < 96 0d 47 >
[62181.076277] saa7133[0]: i2c xfer: < 96 21 c0 >
[62181.124245] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[62181.132375] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[62181.140255] saa7133[0]: i2c xfer: < c2 a0 c0 >
[62181.148254] saa7133[0]: i2c xfer: < c2 30 10 >
[62181.156245] saa7133[0]: i2c xfer: < c3 =09 =a9 >
[62181.268220] saa7133[0]: i2c xfer: < c2 60 3c >
[62181.444164] saa7133[0]: i2c xfer: < c2 50 bf >
[62181.452145] saa7133[0]: i2c xfer: < c2 80 28 >
[62181.460150] saa7133[0]: i2c xfer: < c2 b0 01 >
[62181.468144] saa7133[0]: i2c xfer: < c2 c0 19 >
[62181.476141] saa7133[0]: i2c xfer: < 96 1b >
[62181.484142] saa7133[0]: i2c xfer: < 97 =5e >
[62181.596117] saa7133[0]: i2c xfer: < 96 1b >
[62181.604089] saa7133[0]: i2c xfer: < 97 =56 >
[62181.716070] saa7133[0]: i2c xfer: < 96 1b >
[62181.724055] saa7133[0]: i2c xfer: < 97 =4c >
[62181.836040] saa7133[0]: i2c xfer: < 96 28 64 >
[62181.947974] saa7133[0]: i2c xfer: < 96 1d >
[62181.955952] saa7133[0]: i2c xfer: < 97 =ba >
[62181.964179] saa7133[0]: i2c xfer: < 96 1b >
[62181.972168] saa7133[0]: i2c xfer: < 97 =3a >
[62181.980162] saa7133[0]: i2c xfer: < c2 80 2c >
[62182.091930] saa7133[0]: i2c xfer: < 96 1d >
[62182.100302] saa7133[0]: i2c xfer: < 97 =56 >
[62182.108135] saa7133[0]: i2c xfer: < 96 1b >
[62182.116744] saa7133[0]: i2c xfer: < 97 =3d >
[62182.130111] saa7133[0]: i2c xfer: < 96 05 01 >
[62182.140342] saa7133[0]: i2c xfer: < 96 0d 27 >
[62182.255866] saa7133[0]: i2c xfer: < 96 21 00 >
[62182.264831] saa7133[0]: i2c xfer: < 96 0f 81 >
[62182.277256] saa7133[0]: i2c xfer: < 96 21 c0 >
[62182.307843] saa7133[0]: i2c xfer: < c2 30 90 >
[62182.315843] saa7133[0]: i2c xfer: < 96 21 00 >
[62182.325960] saa7133[0]: i2c xfer: < 96 02 20 >
[62182.331848] saa7133[0]: i2c xfer: < 96 00 02 >
[62182.557506] saa7133[0]: i2c xfer: < 96 01 02 >
[62182.567606] saa7133[0]: i2c xfer: < 96 02 00 >
[62182.576148] saa7133[0]: i2c xfer: < 96 00 00 >
[62182.592391] saa7133[0]: i2c xfer: < 96 01 82 >
[62182.599776] saa7133[0]: i2c xfer: < 96 28 14 >
[62182.607740] saa7133[0]: i2c xfer: < 96 0f 88 >
[62182.615731] saa7133[0]: i2c xfer: < 96 05 04 >
[62182.623732] saa7133[0]: i2c xfer: < 96 0d 47 >
[62182.631871] saa7133[0]: i2c xfer: < 96 21 c0 >
[62182.679704] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[62182.687712] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[62182.695738] saa7133[0]: i2c xfer: < c2 a0 c0 >
[62182.703714] saa7133[0]: i2c xfer: < c2 30 10 >
[62182.711690] saa7133[0]: i2c xfer: < c3 =09 =a9 >
[62182.827310] saa7133[0]: i2c xfer: < c2 60 3c >
[62183.003605] saa7133[0]: i2c xfer: < c2 50 bf >
[62183.011589] saa7133[0]: i2c xfer: < c2 80 28 >
[62183.019599] saa7133[0]: i2c xfer: < c2 b0 01 >
[62183.027625] saa7133[0]: i2c xfer: < c2 c0 19 >
[62183.035598] saa7133[0]: i2c xfer: < 96 1b >
[62183.043590] saa7133[0]: i2c xfer: < 97 =5e >
[62183.155545] saa7133[0]: i2c xfer: < 96 1b >
[62183.163545] saa7133[0]: i2c xfer: < 97 =56 >
[62183.275509] saa7133[0]: i2c xfer: < 96 1b >
[62183.283503] saa7133[0]: i2c xfer: < 97 =4c >
[62183.395485] saa7133[0]: i2c xfer: < 96 28 64 >
[62183.507432] saa7133[0]: i2c xfer: < 96 1d >
[62183.515424] saa7133[0]: i2c xfer: < 97 =c0 >
[62183.523426] saa7133[0]: i2c xfer: < 96 1b >
[62183.531419] saa7133[0]: i2c xfer: < 97 =41 >
[62183.539421] saa7133[0]: i2c xfer: < c2 80 2c >
[62183.651388] saa7133[0]: i2c xfer: < 96 1d >
[62183.659367] saa7133[0]: i2c xfer: < 97 =5a >
[62183.667375] saa7133[0]: i2c xfer: < 96 1b ><7>saa7133[0]/audio: 
tvaudio thread status: 0x100000 [no standard detected]
[62183.675388] saa7133[0]/audio: detailed status: ############# init done
[62183.676168]
[62183.676178] saa7133[0]: i2c xfer: < 97 =3b >
[62183.683370] saa7133[0]: i2c xfer: < 96 05 01 >
[62183.691557] saa7133[0]: i2c xfer: < 96 0d 27 >
[62183.803329] saa7133[0]: i2c xfer: < 96 21 00 >
[62183.811664] saa7133[0]: i2c xfer: < 96 0f 81 >
[62183.829485] saa7133[0]: i2c xfer: < 96 21 c0 >
[62183.859298] saa7133[0]: i2c xfer: < c2 30 90 >
[62183.867520] saa7133[0]: i2c xfer: < 96 21 00 >
[62183.875566] saa7133[0]: i2c xfer: < 96 02 20 >
[62183.883498] saa7133[0]: i2c xfer: < 96 00 02 >
Quoted 4 lines

tvtime-scanner finds no channels, not in PAL, nor SECAM or NTSC mode....

Any suggestions?

Initialization and read/write traffic to the tda8275a and from the tda8290 analog IF demodulator looks ok.

As said, a next question is, if it has a separate radio antenna input.

Most cards switch the antenna input and AGC on gpio21 then. Examples are card=65, 81 or 78, with swapped switching some LifeView cards, keeping gpio21 high for TV input and low for radio.

Card=78 has a second female antenna connector, which is also used for radio and DVB-T, card=81 has a normal male second connector for radio only and shares analog TV and DVB-T input on the same single female connector. See also saa7134-dvb.c for switching.

If you enable debug=1 for tuner, the tda8275a reports "lock" on found channels. You might see still a black picture only, even with tvtime's signal detection disabled and correct antenna input set.

Then in a next step try an other vmux on the saa713x for TV. If the most common vmux = 1 still fails, next popular is vmux = 3 for TV, but it can be also 0, 2 and 4.

Good luck,
Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw

Am Dienstag, den 19.08.2008, 13:03 +0200 schrieb A. Fichtner:

Quoted 303 lines
Quoted 18 lines

Initialization and read/write traffic to the tda8275a and from the tda8290 analog IF demodulator looks ok.

As said, a next question is, if it has a separate radio antenna input.

Most cards switch the antenna input and AGC on gpio21 then. Examples are card=65, 81 or 78, with swapped switching some LifeView cards, keeping gpio21 high for TV input and low for radio.

Card=78 has a second female antenna connector, which is also used for radio and DVB-T, card=81 has a normal male second connector for radio only and shares analog TV and DVB-T input on the same single female connector. See also saa7134-dvb.c for switching.

If you enable debug=1 for tuner, the tda8275a reports "lock" on found channels. You might see still a black picture only, even with tvtime's signal detection disabled and correct antenna input set.

Quoted 8 lines

Then in a next step try an other vmux on the saa713x for TV. If the most common vmux = 1 still fails, next popular is vmux = 3 for TV, but it can be also 0, 2 and 4.

Good luck,
Hermann

Hello again!

The card has only one female antenna connector. There is also a combined input
for svideo and composite.

I've tried card=81 with only takes a long time for scanning for channels but
dont find one. dmesg output isnt an other.

i tried card=65, there dmesg will still tell me more as you can see below.

[ 6532.970222] pccard: CardBus card inserted into slot 0
[ 6532.970342] yenta EnE: chaning testregister 0xC9, 44 -> 44
[ 4081.678929] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 4081.679505] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 4081.679800] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 
11 (level, low) -> IRQ 11
[ 4081.679819] saa7133[0]: found at 0000:02:00.0, rev: 16, irq: 11, 
latency: 0, mmio: 0x34000000
[ 4081.679829] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 4081.679838] saa7133[0]: subsystem: 1132:2004, board: V-Stream Studio 
TV Terminator [card=65,insmod option]
[ 4081.679857] saa7133[0]: board init: gpio is 0
[ 4081.679868] saa7133[0]: gpio: mode=0x0000000 in=0x0000000 
out=0x0000000 [pre-init]
[ 4081.681436] input: saa7134 IR (V-Stream Studio TV  as 
/devices/pci0000:00/0000:00:09.0/0000:02:00.0/input/input11
[ 4081.810479] saa7133[0]: i2c xfer: < a0 00 >
[ 4081.818628] saa7133[0]: i2c xfer: < a1 =32 =11 =04 =20 =54 =20 =1c

=00 =43 =43 =a9 =1c =55 =d2 =b2 =92 =00 =00 =f0 =0f =ff =20 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =01 =40 =01 =02 =02 =01 =01 =03 =08 =ff =00 =1d =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =22 =00 =c2 =96 =ff =02 =30 =15 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 >

[ 4081.858323] saa7133[0]: i2c eeprom 00: 32 11 04 20 54 20 1c 00 43 43 
a9 1c 55 d2 b2 92
[ 4081.858338] saa7133[0]: i2c eeprom 10: 00 00 f0 0f ff 20 ff ff ff ff 
ff ff ff ff ff ff
[ 4081.858351] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 
00 1d ff ff ff ff
[ 4081.858364] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 4081.858376] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff 
ff ff ff ff ff ff
[ 4081.858389] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 4081.858402] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 4081.858414] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff
[ 4081.858427] saa7133[0]: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858439] saa7133[0]: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858451] saa7133[0]: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858463] saa7133[0]: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858475] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858488] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858500] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 4081.858512] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00
[ 6533.589841] saa7133[0]: i2c xfer: < 97 >
[ 6533.597908] saa7133[0]: i2c scan: found device @ 0x96  [???]
[ 6533.600655] saa7133[0]: i2c xfer: < a1 >
[ 6533.605905] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[ 6533.695409] saa7133[0]: i2c xfer: < 96 >
[ 6533.701896] tuner' 2-004b: Setting mode_mask to 0x0e
[ 6533.701905] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 6533.701913] tuner' 2-004b: tuner 0x4b: Tuner type absent
[ 6533.703284] tuner' i2c attach [addr=0x4b,client=tuner']
[ 6533.712918] tuner' 2-004b: Calling set_type_addr for type=54, 
addr=0xff, mode=0x0e, config=0x00
[ 6533.712934] tuner' 2-004b: defining GPIO callback
[ 6533.713147] saa7133[0]: i2c xfer: < 96 1f >
[ 6533.717927] saa7133[0]: i2c xfer: < 97 =89 >
[ 6533.725857] saa7133[0]: i2c xfer: < 96 2f >
[ 6533.733848] saa7133[0]: i2c xfer: < 97 =00 >
[ 6533.741857] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6533.773830] saa7133[0]: i2c xfer: < c1 ERROR: NO_DEVICE
[ 6533.773983] saa7133[0]: i2c xfer: < c3 =88 >
[ 6533.781841] saa7133[0]: i2c xfer: < c5 ERROR: NO_DEVICE
[ 6533.781989] saa7133[0]: i2c xfer: < c7 ERROR: NO_DEVICE
[ 6533.782134] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6533.789838] tda829x 2-004b: setting tuner address to 61
[ 6533.789846] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6533.821817] saa7133[0]: i2c xfer: < c3 =08 >
[ 6533.830014] saa7133[0]: i2c xfer: < c3 =08 >
[ 6533.837825] saa7133[0]: i2c xfer: < c2 30 90 >
[ 6533.845820] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6533.853818] tda829x 2-004b: type set to tda8290+75a
[ 6533.853826] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6533.885797] saa7133[0]: i2c xfer: < c2 00 00 00 00 dc 05 8b 0c 04 20 
ff 00 00 4b >
[ 6533.893796] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6533.901799] saa7133[0]: i2c xfer: < 96 20 0b >
[ 6533.909796] saa7133[0]: i2c xfer: < 96 30 6f >
[ 6533.917793] tuner' 2-004b: type set to tda8290+75a
[ 6533.917801] tuner' 2-004b: tv freq set to 400.00
[ 6533.917811] saa7133[0]: i2c xfer: < 96 01 00 >
[ 6533.925790] saa7133[0]: i2c xfer: < 96 02 00 >
[ 6533.933788] saa7133[0]: i2c xfer: < 96 00 00 >
[ 6533.949796] saa7133[0]: i2c xfer: < 96 01 90 >
[ 6533.957916] saa7133[0]: i2c xfer: < 96 28 14 >
[ 6533.965776] saa7133[0]: i2c xfer: < 96 0f 88 >
[ 6533.973766] saa7133[0]: i2c xfer: < 96 05 04 >
[ 6533.981770] saa7133[0]: i2c xfer: < 96 0d 47 >
[ 6533.989769] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6534.037746] saa7133[0]: i2c xfer: < c2 00 32 f8 00 16 3b bb 1c 04 20 00 >
[ 6534.045743] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[ 6534.053747] saa7133[0]: i2c xfer: < c2 a0 c0 >
[ 6534.061734] saa7133[0]: i2c xfer: < c2 30 10 >
[ 6534.069736] saa7133[0]: i2c xfer: < c3 =49 =a9 >
[ 6534.196961] saa7133[0]: i2c xfer: < c2 60 3c >
[ 6534.369630] saa7133[0]: i2c xfer: < c2 50 bf >
[ 6534.377629] saa7133[0]: i2c xfer: < c2 80 28 >
[ 6534.385632] saa7133[0]: i2c xfer: < c2 b0 01 >
[ 6534.393629] saa7133[0]: i2c xfer: < c2 c0 19 >
[ 6534.401615] saa7133[0]: i2c xfer: < 96 1b >
[ 6534.409622] saa7133[0]: i2c xfer: < 97 =60 >
[ 6534.521572] saa7133[0]: i2c xfer: < 96 1b >
[ 6534.529576] saa7133[0]: i2c xfer: < 97 =59 >
[ 6534.641536] saa7133[0]: i2c xfer: < 96 1b >
[ 6534.649533] saa7133[0]: i2c xfer: < 97 =50 >
[ 6534.761532] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6534.769488] saa7133[0]: i2c xfer: < 96 0f 81 >
[ 6534.777496] tuner' 2-004b: saa7133[0] tuner' I2C addr 0x96 with type 
54 used for 0x0e
[ 6534.777518] tuner' 2-004b: switching to v4l2
[ 6534.777528] tuner' 2-004b: tv freq set to 400.00
[ 6534.777536] saa7133[0]: i2c xfer: < 96 01 10 >
[ 6534.785477] saa7133[0]: i2c xfer: < 96 02 00 >
[ 6534.793486] saa7133[0]: i2c xfer: < 96 00 00 >
[ 6534.809475] saa7133[0]: i2c xfer: < 96 01 82 >
[ 6534.817492] saa7133[0]: i2c xfer: < 96 28 14 >
[ 6534.825467] saa7133[0]: i2c xfer: < 96 0f 88 >
[ 6534.833473] saa7133[0]: i2c xfer: < 96 05 04 >
[ 6534.841809] saa7133[0]: i2c xfer: < 96 0d 47 >
[ 6534.849462] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6534.897443] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[ 6534.905444] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[ 6534.913444] saa7133[0]: i2c xfer: < c2 a0 c0 >
[ 6534.921622] saa7133[0]: i2c xfer: < c2 30 10 >
[ 6534.929451] saa7133[0]: i2c xfer: < c3 =49 =a9 >
[ 6535.041394] saa7133[0]: i2c xfer: < c2 60 3c >
[ 6535.217340] saa7133[0]: i2c xfer: < c2 50 bf >
[ 6535.225328] saa7133[0]: i2c xfer: < c2 80 28 >
[ 6535.233324] saa7133[0]: i2c xfer: < c2 b0 01 >
[ 6535.241332] saa7133[0]: i2c xfer: < c2 c0 19 >
[ 6535.249332] saa7133[0]: i2c xfer: < 96 1b >
[ 6535.257327] saa7133[0]: i2c xfer: < 97 =7f >
[ 6535.369306] saa7133[0]: i2c xfer: < 96 1b >
[ 6535.377274] saa7133[0]: i2c xfer: < 97 =0f >
[ 6535.489254] saa7133[0]: i2c xfer: < 96 1b >
[ 6535.497239] saa7133[0]: i2c xfer: < 97 =04 >
[ 6535.609202] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6535.617197] saa7133[0]: i2c xfer: < 96 0f 81 >
[ 6535.625205] tuner' 2-004b: tv freq set to 400.00
[ 6535.625214] saa7133[0]: i2c xfer: < 96 01 02 >
[ 6535.633194] saa7133[0]: i2c xfer: < 96 02 00 >
[ 6535.641193] saa7133[0]: i2c xfer: < 96 00 00 >
[ 6535.657183] saa7133[0]: i2c xfer: < 96 01 82 >
[ 6535.665179] saa7133[0]: i2c xfer: < 96 28 14 >
[ 6535.673178] saa7133[0]: i2c xfer: < 96 0f 88 >
[ 6535.681177] saa7133[0]: i2c xfer: < 96 05 04 >
[ 6535.689330] saa7133[0]: i2c xfer: < 96 0d 47 >
[ 6535.697180] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6535.745166] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[ 6535.753446] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[ 6535.761400] saa7133[0]: i2c xfer: < c2 a0 c0 >
[ 6535.769349] saa7133[0]: i2c xfer: < c2 30 10 >
[ 6535.777339] saa7133[0]: i2c xfer: < c3 =49 =a9 >
[ 6535.889102] saa7133[0]: i2c xfer: < c2 60 3c >
[ 6536.065035] saa7133[0]: i2c xfer: < c2 50 bf >
[ 6536.073426] saa7133[0]: i2c xfer: < c2 80 28 >
[ 6536.081248] saa7133[0]: i2c xfer: < c2 b0 01 >
[ 6536.089238] saa7133[0]: i2c xfer: < c2 c0 19 >
[ 6536.097235] saa7133[0]: i2c xfer: < 96 1b >
[ 6536.105231] saa7133[0]: i2c xfer: < 97 =72 >
[ 6536.217004] saa7133[0]: i2c xfer: < 96 1b >
[ 6536.225346] saa7133[0]: i2c xfer: < 97 =75 >
[ 6536.336943] saa7133[0]: i2c xfer: < 96 1b >
[ 6536.345325] saa7133[0]: i2c xfer: < 97 =6d >
[ 6536.456911] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6536.465224] saa7133[0]: i2c xfer: < 96 0f 81 >
[ 6536.473195] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 
out=0x0000000 [Television]
[ 6536.473284] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 
out=0x0000000 [Television]
[ 6536.474294] saa7133[0]/audio: tvaudio thread scan start [1]
[ 6536.474306] saa7133[0]/audio: scanning: B/G D/K I
[ 6536.501582] saa7133[0]: registered device video0 [v4l2]
[ 6536.502600] saa7133[0]: registered device vbi0
[ 6536.503459] saa7133[0]: registered device radio0
[ 6536.503961] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 
out=0x0000000 [Television]
[ 6536.504453] tuner' 2-004b: Cmd TUNER_SET_STANDBY accepted for analog TV
[ 6536.504950] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 6536.536862] saa7133[0]: i2c xfer: < c2 30 90 ><7>saa7133[0]: gpio: 
mode=0x0200000 in=0x0000000 out=0x0000000 [Television]
[ 6536.544875]
[ 6536.544889] saa7133[0]: i2c xfer: < 96 21 00 >
[ 6536.552855] saa7133[0]: i2c xfer: < 96 02 20 ><7>saa7133[0]: gpio: 
mode=0x0200000 in=0x0000000 out=0x0000000 [Television]
[ 6536.560850]
[ 6536.560862] saa7133[0]: i2c xfer: < 96 00 02 >
[ 6536.597483] saa7134_alsa: disagrees about version of symbol 
saa7134_tvaudio_setmute
[ 6536.597509] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[ 6536.597960] saa7134_alsa: disagrees about version of symbol 
saa_dsp_writel
[ 6536.597967] saa7134_alsa: Unknown symbol saa_dsp_writel
[ 6536.598420] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_free
[ 6536.598426] saa7134_alsa: Unknown symbol videobuf_dma_free
[ 6536.598922] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_alloc
[ 6536.598929] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[ 6536.599038] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_build
[ 6536.599045] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[ 6536.599137] saa7134_alsa: disagrees about version of symbol 
saa7134_pgtable_free
[ 6536.599144] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[ 6536.599238] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_init
[ 6536.599245] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[ 6536.599604] saa7134_alsa: disagrees about version of symbol 
saa7134_dmasound_exit
[ 6536.599611] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[ 6536.599861] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init
[ 6536.599867] saa7134_alsa: Unknown symbol videobuf_dma_init
[ 6536.600250] saa7134_alsa: disagrees about version of symbol 
videobuf_dma_init_kernel
[ 6536.600257] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[ 6536.600593] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[ 6536.601047] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[ 6536.601157] saa7134_alsa: disagrees about version of symbol 
saa7134_set_dmabits
[ 6536.601164] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[ 6536.732363] tuner' 2-004b: Cmd VIDIOC_S_STD accepted for analog TV
[ 6536.732396] tuner' 2-004b: tv freq set to 400.00
[ 6536.732408] saa7133[0]: i2c xfer: < 96 01 02 >
[ 6536.740806] saa7133[0]: i2c xfer: < 96 02 00 >
[ 4083.880811] saa7133[0]: i2c xfer: < 96 00 00 >
[ 4083.896764] saa7133[0]: i2c xfer: < 96 01 82 >
[ 4083.904770] saa7133[0]: i2c xfer: < 96 28 14 >
[ 4083.912747] saa7133[0]: i2c xfer: < 96 0f 88 >
[ 4083.920747] saa7133[0]: i2c xfer: < 96 05 04 >
[ 4083.928734] saa7133[0]: i2c xfer: < 96 0d 47 >
[ 4083.936728] saa7133[0]: i2c xfer: < 96 21 c0 >
[ 4083.984696] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 1c 04 20 00 >
[ 4083.997886] saa7133[0]: i2c xfer: < c2 90 ff e0 00 99 >
[ 4084.005127] saa7133[0]: i2c xfer: < c2 a0 c0 >
[ 4084.012685] saa7133[0]: i2c xfer: < c2 30 10 >
[ 4084.020668] saa7133[0]: i2c xfer: < c3 =49 =a9 >
[ 4668.782582] saa7133[0]: i2c xfer: < c2 60 3c >
[ 6537.376506] saa7133[0]: i2c xfer: < c2 50 bf >
[ 6537.384478] saa7133[0]: i2c xfer: < c2 80 28 >
[ 6537.392483] saa7133[0]: i2c xfer: < c2 b0 01 >
[ 6537.400553] saa7133[0]: i2c xfer: < c2 c0 19 >
Quoted 4 lines

But tvtime-scanner dont find any channels.

Which way i can set up an other value to vmux?

Hi,

you need to enable debug also for tda8290 to see lock or no lock.

A pattern for tuning failed in the middle of two successful tuning attempts looks like this.

tuner' 2-004b: tv freq set to 182.25
tda829x 2-004b: setting tda829x to system B
tda827x: setting tda827x to system B
tda827x: AGC2 gain is: 3
tda829x 2-004b: tda8290 is locked, AGC: 144
tda829x 2-004b: adjust gain, step 1. Agc: 144, ADC stat: 0, lock: 128 tda829x 2-004b: adjust gain, step 2. Agc: 118, lock: 128 tuner' 2-004b: VIDIOC_S_FREQUENCY
tuner' 2-004b: tv freq set to 495.25
tda829x 2-004b: setting tda829x to system B
tda827x: setting tda827x to system B
tda827x: AGC2 gain is: 3
tda829x 2-004b: tda8290 not locked, no signal?
tda829x 2-004b: tda8290 not locked, no signal?
tda829x 2-004b: tda8290 not locked, no signal?
tuner' 2-004b: VIDIOC_S_FREQUENCY
tuner' 2-004b: tv freq set to 210.25
tda829x 2-004b: setting tda829x to system B
tda827x: setting tda827x to system B
tda827x: AGC2 gain is: 3
tda829x 2-004b: tda8290 is locked, AGC: 159
tda829x 2-004b: adjust gain, step 1. Agc: 159, ADC stat: 0, lock: 128 tda829x 2-004b: adjust gain, step 2. Agc: 126, lock: 128

What you see with "tv freq set to 400.00" is only a dummy tuning needed for some tuners to have charge pump ready for radio tuning, but there is no broadcast.

Only if you see "lock" and still no picture it is worth to change the TV vmux for the card you are testing in saa7134-cards.c. Simplest is to install recent v4l-dvb and after the change

make
make rmmod
make install
modprobe -v saa7134 card=N tuner=54

You need a way to get rid of the ubuntu troubles for saa7134-alsa too.

A card with TV vmux = 4 is card=77, for other tests better change the vmux in the code.

Good lock :)

Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list