Twinhan AD-TP300 (3030) Mantis .. Help needed..
Hello!
I have this DVB-T card in my ubuntu htpc box but cannot get it to work. I've tried diffrent kinds of drivers and no luck.. my best hopes are on some guys drivers called Manu - he has Mantis drivers that are almost working for this card. The problem are after compiling the lastest hg is that it doesn't create a Frontend0 in the /dev/dvb/adapter0. I get the dvr0, mux0 and the others. I wonder if anyone have any solution for this and can assist me in getting this card to work.
I get this from lspci -vvv
01:06.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Twinhan Technology Co. Ltd Unknown device 0024
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=4K]Many thanks
Oscar
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I don't know if is applicable to you but I have the same problem with a SkyStar HD2 that is a Twinhan clone (mine is satellite not terrestrial), but I think that this could work for you.
I had the same problem, I get dvr0 and such, until I modified the kernel driver to recognize my card, the problem becomes because they are the same card but have different product id (a pci device is identified by its vendor id "vid" and product id "pid"), my clone is the same but with a different vid, 0x003 instead 0x001, so I edited the .h of the driver change the vid to the SkyStar HD2, and recompile&install the driver modules.
Later I had read that without this modification the frontend is not created, so maybe you are in the same situation as I.
I hope this helps you, bye.
2008/8/19 Carl Oscar Ejwertz <[email protected]>:
Quoted 34 lines
Hello!
I have this DVB-T card in my ubuntu htpc box but cannot get it to work. I've tried diffrent kinds of drivers and no luck.. my best hopes are on some guys drivers called Manu - he has Mantis drivers that are almost working for this card. The problem are after compiling the lastest hg is that it doesn't create a Frontend0 in the
/dev/dvb/adapter0. I get the dvr0, mux0 and the others. I wonder if anyone have any solution for this and can assist me in getting this card to work.I get this from lspci -vvv
01:06.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Twinhan Technology Co. Ltd Unknown device 0024
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory atea000000(32-bit, prefetchable) [size=4K]Many thanks
Oscar
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Signature · 14 lines
--------------------------------------------------- José Antonio Robles [email protected] 661 960 119 Sometimes something happens ... --------------------------------------------------- _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb