Skip to contentSkip to conversation

Patch: gspca-sonixb-make-tested-cams-default-to-gspca.patch

PATCH Hans de Goede 1 participant 1 message Aug 30, 2008 Media (V4L/DVB)

lore
Share & tools
lore

Hans de Goede

author
#0 lore raw

Hi All,

This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca).

It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo.

Signed-off-by Hans de Goede <[email protected]>

Regards,

Hans

This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca).

It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo.

Signed-off-by Hans de Goede <[email protected]>
linux/drivers/media/video/gspca/sonixb.c +3 -3
diff -r 41902288c7da linux/drivers/media/video/gspca/sonixb.c
@@ -1231,10 +1231,10 @@
 
 
 static __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
+	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)},
-	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)},
-	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)},
+	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
 	{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
 	{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 #endif
linux/drivers/media/video/sn9c102/sn9c102_devtable.h +3 -1
diff -r 41902288c7da linux/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -40,8 +40,10 @@
 
 static const struct usb_device_id sn9c102_id_table[] = {
 	/* SN9C101 and SN9C102 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },

@@ -72,7 +74,7 @@
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list