Skip to contentSkip to conversation

Uniquely identify and Motherboard Model.

DISCUSSION James Courtier-Dutton 2 participants 2 messages Sep 6, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

Is there a way I could uniquely identify a Motherboard Model. I don't need the serial number, just the model.
Applications for this could be:
1) Create a table to map Motherboard Model to lmsensors calibration settings. All motherboards seem to use different resistors, so the calibration needs to be adjusted for each motherboard model.
2) Sound card in/out wiring.
3) Any other wiring on the motherboard that one needs to know, but cannot identify through other means.

It might be useful for the kernel to provide this as a service so that driver modules can use it to make choices.

Kind Regards

James

#1 lore raw
Quoted 4 lines · James Courtier-Dutton

Hi,

Is there a way I could uniquely identify a Motherboard Model. I don't need the serial number, just the model.

Doesn't dmidecode already allow this?
e.g. sudo dmidecode --type baseboard
possibly combined with: sudo dmidecode --type chassis

See for reference:
http://www.cyberciti.biz/tips/querying-dumping-bios-from-linux-command-prompt.html

Quoted 2 lines

Applications for this could be:
2) Sound card in/out wiring.

With respect to sound in/out, it might benefit userland as well, to help set up your speakers. Particularly as some cards allow for several plugs to be both in- and output at one's choosing.