iwl4965 and 802.11a
Hi,
using your latest compat-2.6-old drivers I'm unable to see my 802.11a network.
It used to work ok but has been problematic since kernel 2.6.24.
on 2.6.24 it would show up but I could only connect to it if I turned wpa off.
2.6.25 was hopeless and so was 2.6.26 till I updated the Ucode now b/g works fine other than having to try twice on encrypted connections and the interface going down when the link was reset. It looks like your latest drivers have fixed that but 802.11a is still nowhere to be seen.
I can see 11 networks on 802.11g from here so you can understand that the 5 gig band is much better for me.
Many thanks
Jon Westgate
Quoted 4 lines · Jon Wesgate
using your latest compat-2.6-old drivers I'm unable to see my 802.11a network.
It used to work ok but has been problematic since kernel 2.6.24. on 2.6.24 it would show up but I could only connect to it if I turned
Quoted 8 lines
wpa off.
2.6.25 was hopeless and so was 2.6.26 till I updated the Ucode now b/g
works fine other than having to try twice on encrypted connections and
the interface going down when the link was reset.
It looks like your latest drivers have fixed that but 802.11a is still nowhere to be seen.
Which A band channel is your AP on? Please attach your dmesg with "modprobe iwlagn debug=1". And make sure you are using the correct regdomain for cfg80211.
Thanks,
-yi