Skip to contentSkip to conversation

i.MX31: document timer precision option

PATCH New Guennadi Liakhovetski 2 participants 3 messages Aug 28, 2008 – Sep 18, 2008 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i.MX31: document timer precision option

---

README.imx31 new file +13 -0
diff -u /dev/null doc/README.imx31
@@ -0,0 +1,13 @@
+i.MX31 specific Configuration Options:
+--------------------------------------
+
+- Timer precision:
+		CONFIG_MX31_TIMER_HIGH_PRECISION
+
+		Enable higher precision timer. The low-precision timer
+		(default) provides approximately 4% error, whereas the
+		high-precision timer is about 0.4% accurate. The extra
+		accuracy is achieved at the cost of higher computational
+		overhead, which, in places where time is measured, should
+		not be critical, so, it should be safe to enable this
+		option.
#1 lore raw

PATCH 1/1 i.MX31: document timer precision option

Hi Guennadi,

Quoted 10 lines · Guennadi Liakhovetski

---

diff -u /dev/null doc/README.imx31

README.imx31 new file +3 -0
@@ -0,0 +1,13 @@
+i.MX31 specific Configuration Options:
+--------------------------------------
+

README.imx31 line 13

Quoted 10 lines
README.imx31 new file +10 -0
+- Timer precision:
+		CONFIG_MX31_TIMER_HIGH_PRECISION
+
+		Enable higher precision timer. The low-precision timer
+		(default) provides approximately 4% error, whereas the
+		high-precision timer is about 0.4% accurate. The extra
+		accuracy is achieved at the cost of higher computational
+		overhead, which, in places where time is measured, should
+		not be critical, so, it should be safe to enable this
+		option.

I'm not familiar with the maintainance policy of README and doc/*, but is there any reasone this README.imx31 is sitting on the top of tree? Should be marged into $(TOPDIR)/README, or moved to doc/ directory?

Noticed a few minutes ago, so just let you know...

Signature · 2 lines
Shinya Kuribayashi
NEC Electronics
#2 lore raw

PATCH 1/1 i.MX31: document timer precision option

Quoted 28 lines · Shinya Kuribayashi

Hi Guennadi,

Quoted 10 lines · Guennadi Liakhovetski

---

diff -u /dev/null doc/README.imx31

README.imx31 new file +3 -0
@@ -0,0 +1,13 @@
+i.MX31 specific Configuration Options:
+--------------------------------------
+

README.imx31 line 13

Quoted 10 lines
README.imx31 new file +10 -0
+- Timer precision:
+		CONFIG_MX31_TIMER_HIGH_PRECISION
+
+		Enable higher precision timer. The low-precision timer
+		(default) provides approximately 4% error, whereas the
+		high-precision timer is about 0.4% accurate. The extra
+		accuracy is achieved at the cost of higher computational
+		overhead, which, in places where time is measured, should
+		not be critical, so, it should be safe to enable this
+		option.

I'm not familiar with the maintainance policy of README and doc/*, but is there any reasone this README.imx31 is sitting on the top of tree? Should be marged into $(TOPDIR)/README, or moved to doc/ directory?

Quoted 3 lines

Noticed a few minutes ago, so just let you know...

Quoted 1 line

+++ doc/README.imx31 2008-08-28 12:15:21.000000000 +0200

Looks like doc/ to me.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.

DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de