AMCC 440 SPI question
The yosemite.dts has the following entry, which leads me to believe that there is SPI support. I'd like to do something similar for a Sequoia board, but looking in Josh's "next" branch, I don't see any driver that would recognize the spi-440ep string. So my question is, is there a SPI driver for the PPC440, that is .dts aware?
spi@ef600900 {
compatible = "amcc,spi-440ep";
reg = <ef600900 6>;
interrupts = <8 4>;
interrupt-parent = <&UIC0>;
};Also, googling for a driver, I find the patch that introduced this .dts file:
Patch: [PATCH 1/3][POWERPC] 4xx: Add AMCC 440EP Yosemite DTS patchwork.ozlabs.org/linuxppc/patch?id=16992
However, when I click on the patchwork link, I get a 404 error. Perhaps this just means the patch is old and has been removed from patchwork. But since it is a "1 of 3", I was hoping one of the other parts would contain the actual spi-440ep driver code.
Hints greatly appreciated!
Steve
Quoted 5 lines · Steven A. Falco
The
yosemite.dtshas the following entry, which leads me to believe that there is SPI support. I'd like to do something similar for a Sequoia board, but looking in Josh's "next" branch, I don't see any driver that would recognize the spi-440ep string. So my question is, is there a SPI driver for the PPC440, that is .dts aware?
There is no mainline driver, no. There might be one in the DENX kernel tree.
Quoted 11 lines
spi@ef600900 { compatible = "amcc,spi-440ep"; reg = <ef600900 6>; interrupts = <8 4>; interrupt-parent = <&UIC0>; };Also, googling for a driver, I find the patch that introduced this .dts file:
Quoted 7 lines
Patch: [PATCH 1/3][POWERPC] 4xx: Add AMCC 440EP Yosemite DTS patchwork.ozlabs.org/linuxppc/patch?id=16992
However, when I click on the patchwork link, I get a 404 error. Perhaps this just means the patch is old and has been removed from patchwork. But since it is a "1 of 3", I was hoping one of the other parts would contain the actual spi-440ep driver code.
Patchwork was updated to a new version recently and the old one was either taken offline or moved elsewhere. The set of patches that added Yosemite didn't include an SPI driver (I know, I wrote them). I just enumerated the device in the DTS because it's on the board.
josh
Quoted 9 lines · Josh Boyer
Quoted 5 lines · Steven A. Falco
The
yosemite.dtshas the following entry, which leads me to believe that there is SPI support. I'd like to do something similar for a Sequoia board, but looking in Josh's "next" branch, I don't see any driver that would recognize the spi-440ep string. So my question is, is there a SPI driver for the PPC440, that is .dts aware?There is no mainline driver, no. There might be one in the DENX kernel tree.
Correct. There is one in the "t1000-denx" branch of our linux-2.6-denx repository. But it's not ready for upstream merge yet. I already started cleaning up the driver and extracting the GPIO stuff into a 4xx GPIOLIB implementation. Hopefully I'll find the time to finish this and push the 4xx SPI & GPIOLIB stuff in the next 2-3 weeks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================