Skip to contentSkip to conversation

forcedeth fix: take phy out of reset during power up

PATCH Applied Ayaz Abdulla 2 participants 2 messages Sep 22, 2008 – Sep 25, 2008

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Ayaz Abdulla

author
#0 lore raw

PATCH 1/1 forcedeth fix: take phy out of reset during power up

This patch will add the phy reset bit into the power up mask which is used during power up. Certain BIOSes will place the phy in reset and therefore the driver must take the phy out of reset when it loads.

Signed-off-by Ayaz Abdulla <[email protected]>
drivers/net/forcedeth.c +1 -1
@@ -337,7 +337,7 @@
 	NvRegMSIXIrqStatus = 0x3f0,
 
 	NvRegPowerState2 = 0x600,
-#define NVREG_POWERSTATE2_POWERUP_MASK		0x0F11
+#define NVREG_POWERSTATE2_POWERUP_MASK		0x0F15
 #define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
 #define NVREG_POWERSTATE2_PHY_RESET		0x0004
 };
Applied
#1 lore raw
Quoted 3 lines · Ayaz Abdulla

This patch will add the phy reset bit into the power up mask which is used during power up. Certain BIOSes will place the phy in reset and therefore the driver must take the phy out of reset when it loads.

Signed-off-by Ayaz Abdulla <[email protected]>

applied