tda1004x+saa7162+ PCTV 7010ix
Hi.
I found, that Twinhan 6090 and my Pinnacle PCTV 7010ix have same components.
First I added definitions to Manu's driver. saa716x_hybrid loaded successfully, udev created devices.
Now the questions.
How to check does it works without frontend?
Is tda1004x just usable?
I compiled and loaded it but it ignored my card.
Then, how to force tda1004x to load firmware, check devices and create device file?
I know, both drivers saa716x and tda1004x are very experimental. But simply wait is a little to hard for me.
P.S. Extremaly lame. Don't shoot please.
Signature · 11 lines
WK ---------------------------------------------------------------------- Znajdź mieszkanie w Twoim regionie! kliknij >>> http://link.interia.pl/f1f19 _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 4 lines · Wieslaw Kierbedz
Is tda1004x just usable?
I compiled and loaded it but it ignored my card.
Then, how to force tda1004x to load firmware, check devices and create device file?
I suppose I found.
There is only demodulator definition for saa716x_averhc82_zl10353. To enable others I have to write saa716x_7010ix_tda1004x_config (for example) code?
Has that some sens to adjust functions from other drivers? saa7134-dvb td1316?
Signature · 11 lines
WK ---------------------------------------------------------------------- Znajdź mieszkanie w Twoim regionie! kliknij >>> http://link.interia.pl/f1f19 _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Common carrier_width
Would it be a common thing to implement calculation of carrier width?
static u32 carrier_width(u32 symbol_rate, fe_rolloff_t rolloff)
{
u32 rlf;
switch(rolloff) {
case ROLLOFF_20:
rlf = 20;
break;
case ROLLOFF_25:
rlf = 25;
break;
default:
rlf = 35;
break;
}
return (symbol_rate + (symbol_rate * rlf) / 100);
}Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb