Skip to contentSkip to conversation

help finding entry point of USB data in the kernel, not drivers/usb/core/devio.c?

DISCUSSION George Nychis 2 participants 3 messages Sep 30, 2008

lore
Share & tools
lore
#0 lore raw

Hi all,

I am trying to find the entry point of USB data in the kernel. I have a USB device and I would like to find the latency between the time the data enters the kernel, and I read it in userspace. My first goal is to find where it actually enters the kernel.

The host device driver obtains a URB and reads the data from urb->buffer.

From digging around the kernel code, I had assumed the entry point for all USB data was in drivers/usb/core/devio.c::usbdev_read() ... but it seems as though that is not the case.

Right after the device is locked in this function, I added a simple printk: printk("Reading %d bytes\n", nbytes); // Line 135

Then around line 154 after it reads the usb device descriptor, I added:

    if(temp_desc.idVendor==0xfffe && temp_desc.idProduct==0x0002) {
      printk("...Data from USRP\n");
    }

That gives me an idea that the data is coming from the device I am looking for.

But, it seems as though this method is only related to control information to/from the USB device? Whenever I start my application, I get about 1614 total bytes read from my first printout, and I see only one of my second printout messages. Whereas, I am reading a total of about 8MB from the USB device over the period of time. So I think I am completely missing my actual data entry point.

Additionally, lsusb generates this same exact amount 1614 total bytes of data... so it seems to be control related to me.

I'd greatly appreciate any guidance.

Thanks!
George

#1 lore raw
Quoted 6 lines · George Nychis

Hi all,

I am trying to find the entry point of USB data in the kernel. I have a USB device and I would like to find the latency between the time the data enters the kernel, and I read it in userspace. My first goal is to find where it actually enters the kernel.

I suggest asking this on the linux-usb mailing list instead, it would reach the main Linux USB developers.

Quoted 1 line

The host device driver obtains a URB and reads the data from urb->buffer.

Wait, which way are you sending this data? To or from the device?

Quoted 3 lines

From digging around the kernel code, I had assumed the entry point for all USB data was in drivers/usb/core/devio.c::usbdev_read() ... but it seems as though that is not the case.

No, that entry point is for usbfs, not the individual drivers, and not the core.

Quoted 11 lines

Right after the device is locked in this function, I added a simple printk:
printk("Reading %d bytes\n", nbytes); // Line 135

Then around line 154 after it reads the usb device descriptor, I added:

    if(temp_desc.idVendor==0xfffe && temp_desc.idProduct==0x0002) {
      printk("...Data from USRP\n");
    }

That gives me an idea that the data is coming from the device I am looking for.

Quoted 6 lines

But, it seems as though this method is only related to control information to/from the USB device? Whenever I start my application, I get about 1614 total bytes read from my first printout, and I see only one of my second printout messages. Whereas, I am reading a total of about 8MB from the USB device over the period of time. So I think I am completely missing my actual data entry point.

Are you watching all of the different USB device endpoints?

thanks,

greg k-h

#2 lore raw
Quoted 2 lines · Greg KH

I suggest asking this on the linux-usb mailing list instead, it would reach the main Linux USB developers.

Thanks! I was unaware of the list. Punting there also.

Quoted 1 line

Wait, which way are you sending this data? To or from the device?

I am looking for data from the device to the host.

Quoted 2 lines

No, that entry point is for usbfs, not the individual drivers, and not the core.

I see, that explains things.

Quoted 2 lines

Are you watching all of the different USB device endpoints?

Yes, I am not filtering really. But if this code is for usbfs, then this is definitely not what I am looking for.

I think what I am looking for might be in devices.c::usb_device_read() ... poking around there now. It calls usb_device_dump() which takes a user space buffer as a parameter for which it dumps data in to.

Thanks for the response!

- George