unit name for /soc in device tree

Hi,

I'm starting a scratch port of Linux 2.6 to an MPC8272 board that currently runs 2.4 (MontaVista).

Documentation/powerpc/booting-without-of.txt says:
The name of an soc
node should start with "soc", and the remainder of the name should represent the part number for the soc. For example, the MPC8540's soc node would be called "soc8540".

So I used the unit name "soc8272@f0000000" in my .dts file.

But arch/powerpc/boot/cpm-serial.c does:

	muram = finddevice("/soc/cpm/muram/data");

And that doesn't work if I follow the naming convention suggested. I changed the .dts file to use the name "soc" instead of "soc8272" and now the boot serial driver works. Is that the right way to go? Or will this lead to problems in the kernel later (I'm not that far yet)?

					-=] Mike [=-

Gah, what's that still doing in there? Ignore it. It's a bad idea, for exactly this reason.

-Scott

Thanks!