saa7134 controller

Hi,

I'm Trying to capture from a capture TV card (Zogis Real Angel 220 with FM) that has a saa7134 controller but I'm not succeding in make it work.

When I type dmesg the operating system (linux Ubuntu 8.04)says that it cannot automatically detect the device, and V4L2 lists it as UNKNOWN. The driver listed by video4linux is saa7134. The device is identified at /dev/video0.

Please, could you clarify step by step how can I setup linux to make this device work ?

Another thing... what is the best application available today to watch tv on linux ???

Thank you very much!
Daniel

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Hi Daniel,

Am Dienstag, den 16.09.2008, 16:21 -0300 schrieb [email protected]:

looks like you can't get old dogs away from the oven with such questions that soon.

Start as usual, it is exercised close to two hundred times now, with the hidden cards included.

Reload the drivers with i2c_scan=1 (modinfo saa7134), identify the tuner and the audio clock and follow the instructions on the v4l wiki at linuxtv.org about adding a new card, if it even is one.

You can find lots of patterns like a card can be configured here
http://linuxtv.org/hg/v4l-dvb/log/e5ca4534b543/linux/drivers/media/video/saa7134/saa7134.h

and all sort of questions since 2002 on the lists/archives.

Cheers,
Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Hi All,

In my board SAA7134 is directly interface to CCIR interface of IMX processor ..
Can it work really ... Please give your valuable suggestions... This is for video in support for our board...

Thanks
NK
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Hello,

Am Samstag, den 31.01.2009, 19:21 +0530 schrieb Nimesh linuxmail:

some of them seem to have mpeg2/4 hardware encoders.

For what I know we don't have support for them yet.

I can't tell if they do have something internally for GNU/Linux support at Freescale.

Depending on the board's setup you might be able to get uncompressed video from the external inputs or tuner, if present.

Cheers,
Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list