ARM: OMAP3: Add I2C support

PATCH Superseded dirk.behme at googlemail.com 1 participant 1 message Oct 9, 2008 I2C

lore

Share & tools

lore

dirk.behme at googlemail.com

author

2008-10-09 17:56 UTC #0 lore raw

PATCH v3 10/13 ARM: OMAP3: Add I2C support

Subject: [PATCH 10/13 v3] ARM: OMAP3: Add I2C support

From: Dirk Behme <[email protected]>

Add I2C support

Signed-off-by Dirk Behme <[email protected]>

---
Changes in version v2:

- Remove SMC911X network init as proposed by Ben Warren. Thanks!

 drivers/i2c/Makefile       |    1 
 drivers/i2c/omap24xx_i2c.c |  132 ++++++++++++++++++++++++++-------------------
 drivers/net/Makefile       |    1 
 3 files changed, 80 insertions(+), 54 deletions(-)

drivers/i2c/Makefile +1 -0

Index: u-boot-arm/drivers/i2c/Makefile
===================================================================
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
+COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o

drivers/i2c/omap24xx_i2c.c +78 ~~-54~~

283 lines not on this page · raw message