libata: fix device iteration bugs

Index: work/drivers/ata/libata-core.c
===================================================================
@@ -4169,18 +4169,16 @@ static int cable_is_40wire(struct ata_po
 	if (ap->cbl == ATA_CBL_PATA40_SHORT)
 		return 0;
 	/* If the controller doesn't know we scan
-
-	   - Note: We look for all 40 wire detects at this point.
-	     Any 80 wire detect is taken to be 80 wire cable
-	     because
-	     - In many setups only the one drive (slave if present)
-               will give a valid detect
-             - If you have a non detect capable drive you don't
-               want it to colour the choice
-        */
+	 *
+	 * - Note: We look for all 40 wire detects at this point.  Any
+	 *   80 wire detect is taken to be 80 wire cable because - In
+	 *   many setups only the one drive (slave if present) will
+	 *   give a valid detect - If you have a non detect capable
+	 *   drive you don't want it to colour the choice
+	 */
 	ata_port_for_each_link(link, ap) {
 		ata_link_for_each_dev(dev, link) {
-			if (!ata_is_40wire(dev))
+			if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
 				return 0;
 		}
 	}

Index: work/drivers/ata/libata-eh.c
===================================================================
@@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *ho
 			ata_link_for_each_dev(dev, link) {
 				int devno = dev->devno;
 
+				if (!ata_dev_enabled(dev))
+					continue;
+
 				ehc->saved_xfer_mode[devno] = dev->xfer_mode;
 				if (ata_ncq_enabled(dev))
 					ehc->saved_ncq_enabled |= 1 << devno;

@@ -2790,6 +2793,9 @@ int ata_set_mode(struct ata_link *link,
 
 	/* if data transfer is verified, clear DUBIOUS_XFER on ering top */
 	ata_link_for_each_dev(dev, link) {
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
 			struct ata_ering_entry *ent;
 

@@ -2811,6 +2817,9 @@ int ata_set_mode(struct ata_link *link,
 		u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
 		u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
 
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (dev->xfer_mode != saved_xfer_mode ||
 		    ata_ncq_enabled(dev) != saved_ncq)
 			dev->flags |= ATA_DFLAG_DUBIOUS_XFER;

Index: work/drivers/ata/libata-core.c
===================================================================
@@ -163,43 +163,119 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 
-/*
- * Iterator helpers.  Don't use directly.
+/**
+ *	ata_link_next - link iteration helper
+ *	@link: the previous link, NULL to start
+ *	@ap: ATA port containing links to iterate
+ *	@mode: iteration mode, one of ATA_LITER_*
+ *
+ *	LOCKING:
+ *	Host lock or EH context.
  *
- * LOCKING:
- * Host lock or EH context.
+ *	RETURNS:
+ *	Pointer to the next link.
  */
-struct ata_link *__ata_port_next_link(struct ata_port *ap,
-				      struct ata_link *link, bool dev_only)
+struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
+			       enum ata_link_iter_mode mode)
 {
+	BUG_ON(mode != ATA_LITER_EDGE &&
+	       mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
+
 	/* NULL link indicates start of iteration */
-	if (!link) {
-		if (dev_only && sata_pmp_attached(ap))
-			return ap->pmp_link;
-		return &ap->link;
-	}
+	if (!link)
+		switch (mode) {
+		case ATA_LITER_EDGE:
+		case ATA_LITER_PMP_FIRST:
+			if (sata_pmp_attached(ap))
+				return ap->pmp_link;
+			/* fall through */
+		case ATA_LITER_HOST_FIRST:
+			return &ap->link;
+		}
 
-	/* we just iterated over the host master link, what's next? */
-	if (link == &ap->link) {
-		if (!sata_pmp_attached(ap)) {
-			if (unlikely(ap->slave_link) && !dev_only)
+	/* we just iterated over the host link, what's next? */
+	if (link == &ap->link)
+		switch (mode) {
+		case ATA_LITER_HOST_FIRST:
+			if (sata_pmp_attached(ap))
+				return ap->pmp_link;
+			/* fall through */
+		case ATA_LITER_PMP_FIRST:
+			if (unlikely(ap->slave_link))
 				return ap->slave_link;
+			/* fall through */
+		case ATA_LITER_EDGE:
 			return NULL;
 		}
-		return ap->pmp_link;
-	}
 
 	/* slave_link excludes PMP */
 	if (unlikely(link == ap->slave_link))
 		return NULL;
 
-	/* iterate to the next PMP link */
+	/* we were over a PMP link */
 	if (++link < ap->pmp_link + ap->nr_pmp_links)
 		return link;
+
+	if (mode == ATA_LITER_PMP_FIRST)
+		return &ap->link;
+
 	return NULL;
 }
 
 /**
+ *	ata_dev_next - device iteration helper
+ *	@dev: the previous device, NULL to start
+ *	@link: ATA link containing devices to iterate
+ *	@mode: iteration mode, one of ATA_DITER_*
+ *
+ *	LOCKING:
+ *	Host lock or EH context.
+ *
+ *	RETURNS:
+ *	Pointer to the next device.
+ */
+struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
+				enum ata_dev_iter_mode mode)
+{
+	BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
+	       mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
+
+	/* NULL dev indicates start of iteration */
+	if (!dev)
+		switch (mode) {
+		case ATA_DITER_ENABLED:
+		case ATA_DITER_ALL:
+			dev = link->device;
+			goto check;
+		case ATA_DITER_ENABLED_REVERSE:
+		case ATA_DITER_ALL_REVERSE:
+			dev = link->device + ata_link_max_devices(link) - 1;
+			goto check;
+		}
+
+ next:
+	/* move to the next one */
+	switch (mode) {
+	case ATA_DITER_ENABLED:
+	case ATA_DITER_ALL:
+		if (++dev < link->device + ata_link_max_devices(link))
+			goto check;
+		return NULL;
+	case ATA_DITER_ENABLED_REVERSE:
+	case ATA_DITER_ALL_REVERSE:
+		if (--dev >= link->device)
+			goto check;
+		return NULL;
+	}
+
+ check:
+	if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
+	    !ata_dev_enabled(dev))
+		goto next;
+	return dev;
+}
+
+/**
  *	ata_dev_phys_link - find physical link for a device
  *	@dev: ATA device to look up physical link for
  *

@@ -1107,8 +1183,8 @@ static void ata_lpm_enable(struct ata_ho
 
 	for (i = 0; i < host->n_ports; i++) {
 		ap = host->ports[i];
-		ata_port_for_each_link(link, ap) {
-			ata_link_for_each_dev(dev, link)
+		ata_for_each_link(link, ap, EDGE) {
+			ata_for_each_dev(dev, link, ALL)
 				ata_dev_disable_pm(dev);
 		}
 	}

@@ -2584,11 +2660,11 @@ int ata_bus_probe(struct ata_port *ap)
 
 	ata_port_probe(ap);
 
-	ata_link_for_each_dev(dev, &ap->link)
+	ata_for_each_dev(dev, &ap->link, ALL)
 		tries[dev->devno] = ATA_PROBE_MAX_TRIES;
 
  retry:
-	ata_link_for_each_dev(dev, &ap->link) {
+	ata_for_each_dev(dev, &ap->link, ALL) {
 		/* If we issue an SRST then an ATA drive (not ATAPI)
 		 * may change configuration and be in PIO0 timing. If
 		 * we do a hard reset (or are coming from power on)

@@ -2610,7 +2686,7 @@ int ata_bus_probe(struct ata_port *ap)
 	/* reset and determine device classes */
 	ap->ops->phy_reset(ap);
 
-	ata_link_for_each_dev(dev, &ap->link) {
+	ata_for_each_dev(dev, &ap->link, ALL) {
 		if (!(ap->flags & ATA_FLAG_DISABLED) &&
 		    dev->class != ATA_DEV_UNKNOWN)
 			classes[dev->devno] = dev->class;

@@ -2626,7 +2702,7 @@ int ata_bus_probe(struct ata_port *ap)
 	   specific sequence bass-ackwards so that PDIAG- is released by
 	   the slave device */
 
-	ata_link_for_each_dev_reverse(dev, &ap->link) {
+	ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
 		if (tries[dev->devno])
 			dev->class = classes[dev->devno];
 

@@ -2643,24 +2719,19 @@ int ata_bus_probe(struct ata_port *ap)
 	if (ap->ops->cable_detect)
 		ap->cbl = ap->ops->cable_detect(ap);
 
-	/* We may have SATA bridge glue hiding here irrespective of the
-	   reported cable types and sensed types */
-	ata_link_for_each_dev(dev, &ap->link) {
-		if (!ata_dev_enabled(dev))
-			continue;
-		/* SATA drives indicate we have a bridge. We don't know which
-		   end of the link the bridge is which is a problem */
+	/* We may have SATA bridge glue hiding here irrespective of
+	 * the reported cable types and sensed types.  When SATA
+	 * drives indicate we have a bridge, we don't know which end
+	 * of the link the bridge is which is a problem.
+	 */
+	ata_for_each_dev(dev, &ap->link, ENABLED)
 		if (ata_id_is_sata(dev->id))
 			ap->cbl = ATA_CBL_SATA;
-	}
 
 	/* After the identify sequence we can now set up the devices. We do
 	   this in the normal order so that the user doesn't get confused */
 
-	ata_link_for_each_dev(dev, &ap->link) {
-		if (!ata_dev_enabled(dev))
-			continue;
-
+	ata_for_each_dev(dev, &ap->link, ENABLED) {
 		ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
 		rc = ata_dev_configure(dev);
 		ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;

@@ -2673,9 +2744,8 @@ int ata_bus_probe(struct ata_port *ap)
 	if (rc)
 		goto fail;
 
-	ata_link_for_each_dev(dev, &ap->link)
-		if (ata_dev_enabled(dev))
-			return 0;
+	ata_for_each_dev(dev, &ap->link, ENABLED)
+		return 0;
 
 	/* no device present, disable port */
 	ata_port_disable(ap);

@@ -3321,13 +3391,10 @@ int ata_do_set_mode(struct ata_link *lin
 	int rc = 0, used_dma = 0, found = 0;
 
 	/* step 1: calculate xfer_mask */
-	ata_link_for_each_dev(dev, link) {
+	ata_for_each_dev(dev, link, ENABLED) {
 		unsigned long pio_mask, dma_mask;
 		unsigned int mode_mask;
 
-		if (!ata_dev_enabled(dev))
-			continue;
-
 		mode_mask = ATA_DMA_MASK_ATA;
 		if (dev->class == ATA_DEV_ATAPI)
 			mode_mask = ATA_DMA_MASK_ATAPI;

@@ -3356,10 +3423,7 @@ int ata_do_set_mode(struct ata_link *lin
 		goto out;
 
 	/* step 2: always set host PIO timings */
-	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev))
-			continue;
-
+	ata_for_each_dev(dev, link, ENABLED) {
 		if (dev->pio_mode == 0xff) {
 			ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
 			rc = -EINVAL;

@@ -3373,8 +3437,8 @@ int ata_do_set_mode(struct ata_link *lin
 	}
 
 	/* step 3: set host DMA timings */
-	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
+	ata_for_each_dev(dev, link, ENABLED) {
+		if (!ata_dma_enabled(dev))
 			continue;
 
 		dev->xfer_mode = dev->dma_mode;

@@ -3384,11 +3448,7 @@ int ata_do_set_mode(struct ata_link *lin
 	}
 
 	/* step 4: update devices' xfer mode */
-	ata_link_for_each_dev(dev, link) {
-		/* don't update suspended devices' xfer mode */
-		if (!ata_dev_enabled(dev))
-			continue;
-
+	ata_for_each_dev(dev, link, ENABLED) {
 		rc = ata_dev_set_mode(dev);
 		if (rc)
 			goto out;

@@ -4176,9 +4236,9 @@ static int cable_is_40wire(struct ata_po
 	 *   give a valid detect - If you have a non detect capable
 	 *   drive you don't want it to colour the choice
 	 */
-	ata_port_for_each_link(link, ap) {
-		ata_link_for_each_dev(dev, link) {
-			if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, link, ENABLED) {
+			if (!ata_is_40wire(dev))
 				return 0;
 		}
 	}

@@ -5130,7 +5190,7 @@ static int ata_host_request_pm(struct at
 		}
 
 		ap->pflags |= ATA_PFLAG_PM_PENDING;
-		__ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, HOST_FIRST) {
 			link->eh_info.action |= action;
 			link->eh_info.flags |= ehi_flags;
 		}

@@ -5975,9 +6035,9 @@ static void ata_port_detach(struct ata_p
 	/* EH is now guaranteed to see UNLOADING - EH context belongs
 	 * to us.  Restore SControl and disable all existing devices.
 	 */
-	__ata_port_for_each_link(link, ap) {
+	ata_for_each_link(link, ap, HOST_FIRST) {
 		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
-		ata_link_for_each_dev(dev, link)
+		ata_for_each_dev(dev, link, ALL)
 			ata_dev_disable(dev);
 	}
 

@@ -6440,7 +6500,8 @@ EXPORT_SYMBOL_GPL(ata_base_port_ops);
 EXPORT_SYMBOL_GPL(sata_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_info);
-EXPORT_SYMBOL_GPL(__ata_port_next_link);
+EXPORT_SYMBOL_GPL(ata_link_next);
+EXPORT_SYMBOL_GPL(ata_dev_next);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_host_init);
 EXPORT_SYMBOL_GPL(ata_host_alloc);

286 lines not on this page · raw message

56 lines not on this page · raw message

Index: work/drivers/ata/ahci.c
===================================================================
@@ -1105,14 +1105,14 @@ static void ahci_start_port(struct ata_p
 
 	/* turn on LEDs */
 	if (ap->flags & ATA_FLAG_EM) {
-		ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, EDGE) {
 			emp = &pp->em_priv[link->pmp];
 			ahci_transmit_led_message(ap, emp->led_state, 4);
 		}
 	}
 
 	if (ap->flags & ATA_FLAG_SW_ACTIVITY)
-		ata_port_for_each_link(link, ap)
+		ata_for_each_link(link, ap, EDGE)
 			ahci_init_sw_activity(link);
 
 }

@@ -1344,7 +1344,7 @@ static ssize_t ahci_led_show(struct ata_
 	struct ahci_em_priv *emp;
 	int rc = 0;
 
-	ata_port_for_each_link(link, ap) {
+	ata_for_each_link(link, ap, EDGE) {
 		emp = &pp->em_priv[link->pmp];
 		rc += sprintf(buf, "%lx\n", emp->led_state);
 	}

@@ -1924,7 +1924,7 @@ static void ahci_error_intr(struct ata_p
 	u32 serror;
 
 	/* determine active link */
-	ata_port_for_each_link(link, ap)
+	ata_for_each_link(link, ap, EDGE)
 		if (ata_link_active(link))
 			break;
 	if (!link)

Index: work/drivers/ata/ata_generic.c
===================================================================
@@ -57,10 +57,7 @@ static int generic_set_mode(struct ata_l
 	if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
 		dma_enabled = 0xFF;
 
-	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev))
-			continue;
-
+	ata_for_each_dev(dev, link, ENABLED) {
 		/* We don't really care */
 		dev->pio_mode = XFER_PIO_0;
 		dev->dma_mode = XFER_MW_DMA_0;

Index: work/drivers/ata/libata-acpi.c
===================================================================
@@ -89,7 +89,7 @@ void ata_acpi_associate_sata_port(struct
 
 		ap->link.device->acpi_handle = NULL;
 
-		ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, EDGE) {
 			acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
 
 			link->device->acpi_handle =

@@ -144,8 +144,8 @@ static void ata_acpi_detach_device(struc
 		struct ata_link *tlink;
 		struct ata_device *tdev;
 
-		ata_port_for_each_link(tlink, ap)
-			ata_link_for_each_dev(tdev, tlink)
+		ata_for_each_link(tlink, ap, EDGE)
+			ata_for_each_dev(tdev, tlink, ALL)
 				tdev->flags |= ATA_DFLAG_DETACH;
 	}
 

@@ -627,12 +627,9 @@ int ata_acpi_cbl_80wire(struct ata_port
 {
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, &ap->link) {
+	ata_for_each_dev(dev, &ap->link, ENABLED) {
 		unsigned long xfer_mask, udma_mask;
 
-		if (!ata_dev_enabled(dev))
-			continue;
-
 		xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
 		ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
 

@@ -932,7 +929,7 @@ void ata_acpi_on_resume(struct ata_port
 		 * use values set by _STM.  Cache _GTF result and
 		 * schedule _GTF.
 		 */
-		ata_link_for_each_dev(dev, &ap->link) {
+		ata_for_each_dev(dev, &ap->link, ALL) {
 			ata_acpi_clear_gtf(dev);
 			if (ata_dev_enabled(dev) &&
 			    ata_dev_get_GTF(dev, NULL) >= 0)

@@ -943,7 +940,7 @@ void ata_acpi_on_resume(struct ata_port
 		 * there's no reason to evaluate IDE _GTF early
 		 * without _STM.  Clear cache and schedule _GTF.
 		 */
-		ata_link_for_each_dev(dev, &ap->link) {
+		ata_for_each_dev(dev, &ap->link, ALL) {
 			ata_acpi_clear_gtf(dev);
 			if (ata_dev_enabled(dev))
 				dev->flags |= ATA_DFLAG_ACPI_PENDING;

@@ -971,8 +968,8 @@ void ata_acpi_set_state(struct ata_port
 	if (state.event == PM_EVENT_ON)
 		acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
 
-	ata_link_for_each_dev(dev, &ap->link) {
-		if (dev->acpi_handle && ata_dev_enabled(dev))
+	ata_for_each_dev(dev, &ap->link, ENABLED) {
+		if (dev->acpi_handle)
 			acpi_bus_set_power(dev->acpi_handle,
 				state.event == PM_EVENT_ON ?
 					ACPI_STATE_D0 : ACPI_STATE_D3);

Index: work/drivers/ata/libata-pmp.c
===================================================================
@@ -321,7 +321,7 @@ static void sata_pmp_quirks(struct ata_p
 
 	if (vendor == 0x1095 && devid == 0x3726) {
 		/* sil3726 quirks */
-		ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, EDGE) {
 			/* Class code report is unreliable and SRST
 			 * times out under certain configurations.
 			 */

@@ -336,7 +336,7 @@ static void sata_pmp_quirks(struct ata_p
 		}
 	} else if (vendor == 0x1095 && devid == 0x4723) {
 		/* sil4723 quirks */
-		ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, EDGE) {
 			/* class code report is unreliable */
 			if (link->pmp < 2)
 				link->flags |= ATA_LFLAG_ASSUME_ATA;

@@ -348,7 +348,7 @@ static void sata_pmp_quirks(struct ata_p
 		}
 	} else if (vendor == 0x1095 && devid == 0x4726) {
 		/* sil4726 quirks */
-		ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, EDGE) {
 			/* Class code report is unreliable and SRST
 			 * times out under certain configurations.
 			 * Config device can be at port 0 or 5 and

@@ -450,7 +450,7 @@ int sata_pmp_attach(struct ata_device *d
 	if (ap->ops->pmp_attach)
 		ap->ops->pmp_attach(ap);
 
-	ata_port_for_each_link(tlink, ap)
+	ata_for_each_link(tlink, ap, EDGE)
 		sata_link_init_spd(tlink);
 
 	ata_acpi_associate_sata_port(ap);

@@ -487,7 +487,7 @@ static void sata_pmp_detach(struct ata_d
 	if (ap->ops->pmp_detach)
 		ap->ops->pmp_detach(ap);
 
-	ata_port_for_each_link(tlink, ap)
+	ata_for_each_link(tlink, ap, EDGE)
 		ata_eh_detach_dev(tlink->device);
 
 	spin_lock_irqsave(ap->lock, flags);

@@ -700,7 +700,7 @@ static int sata_pmp_eh_recover_pmp(struc
 		}
 
 		/* PMP is reset, SErrors cannot be trusted, scan all */
-		ata_port_for_each_link(tlink, ap) {
+		ata_for_each_link(tlink, ap, EDGE) {
 			struct ata_eh_context *ehc = &tlink->eh_context;
 
 			ehc->i.probe_mask |= ATA_ALL_DEVICES;

@@ -768,7 +768,7 @@ static int sata_pmp_eh_handle_disabled_l
 
 	spin_lock_irqsave(ap->lock, flags);
 
-	ata_port_for_each_link(link, ap) {
+	ata_for_each_link(link, ap, EDGE) {
 		if (!(link->flags & ATA_LFLAG_DISABLED))
 			continue;
 

@@ -852,7 +852,7 @@ static int sata_pmp_eh_recover(struct at
 	int cnt, rc;
 
 	pmp_tries = ATA_EH_PMP_TRIES;
-	ata_port_for_each_link(link, ap)
+	ata_for_each_link(link, ap, EDGE)
 		link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;
 
  retry:

@@ -861,7 +861,7 @@ static int sata_pmp_eh_recover(struct at
 		rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
 				    ops->hardreset, ops->postreset, NULL);
 		if (rc) {
-			ata_link_for_each_dev(dev, &ap->link)
+			ata_for_each_dev(dev, &ap->link, ALL)
 				ata_dev_disable(dev);
 			return rc;
 		}

@@ -870,7 +870,7 @@ static int sata_pmp_eh_recover(struct at
 			return 0;
 
 		/* new PMP online */
-		ata_port_for_each_link(link, ap)
+		ata_for_each_link(link, ap, EDGE)
 			link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;
 
 		/* fall through */

@@ -942,7 +942,7 @@ static int sata_pmp_eh_recover(struct at
 	}
 
 	cnt = 0;
-	ata_port_for_each_link(link, ap) {
+	ata_for_each_link(link, ap, EDGE) {
 		if (!(gscr_error & (1 << link->pmp)))
 			continue;
 

Index: work/drivers/ata/libata-scsi.c
===================================================================
@@ -3228,12 +3228,12 @@ void ata_scsi_scan_host(struct ata_port
 		return;
 
  repeat:
-	ata_port_for_each_link(link, ap) {
-		ata_link_for_each_dev(dev, link) {
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, link, ENABLED) {
 			struct scsi_device *sdev;
 			int channel = 0, id = 0;
 
-			if (!ata_dev_enabled(dev) || dev->sdev)
+			if (dev->sdev)
 				continue;
 
 			if (ata_is_host_link(link))

@@ -3254,9 +3254,9 @@ void ata_scsi_scan_host(struct ata_port
 	 * failure occurred, scan would have failed silently.  Check
 	 * whether all devices are attached.
 	 */
-	ata_port_for_each_link(link, ap) {
-		ata_link_for_each_dev(dev, link) {
-			if (ata_dev_enabled(dev) && !dev->sdev)
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, link, ENABLED) {
+			if (!dev->sdev)
 				goto exit_loop;
 		}
 	}

@@ -3380,7 +3380,7 @@ static void ata_scsi_handle_link_detach(
 	struct ata_port *ap = link->ap;
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, link) {
+	ata_for_each_dev(dev, link, ALL) {
 		unsigned long flags;
 
 		if (!(dev->flags & ATA_DFLAG_DETACHED))

@@ -3495,7 +3495,7 @@ static int ata_scsi_user_scan(struct Scs
 	if (devno == SCAN_WILD_CARD) {
 		struct ata_link *link;
 
-		ata_port_for_each_link(link, ap) {
+		ata_for_each_link(link, ap, EDGE) {
 			struct ata_eh_info *ehi = &link->eh_info;
 			ehi->probe_mask |= ATA_ALL_DEVICES;
 			ehi->action |= ATA_EH_RESET;

@@ -3543,11 +3543,11 @@ void ata_scsi_dev_rescan(struct work_str
 
 	spin_lock_irqsave(ap->lock, flags);
 
-	ata_port_for_each_link(link, ap) {
-		ata_link_for_each_dev(dev, link) {
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, link, ENABLED) {
 			struct scsi_device *sdev = dev->sdev;
 
-			if (!ata_dev_enabled(dev) || !sdev)
+			if (!sdev)
 				continue;
 			if (scsi_device_get(sdev))
 				continue;

Index: work/drivers/ata/pata_it821x.c
===================================================================
@@ -465,24 +465,22 @@ static int it821x_smart_set_mode(struct
 {
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, link) {
-		if (ata_dev_enabled(dev)) {
-			/* We don't really care */
-			dev->pio_mode = XFER_PIO_0;
-			dev->dma_mode = XFER_MW_DMA_0;
-			/* We do need the right mode information for DMA or PIO
-			   and this comes from the current configuration flags */
-			if (ata_id_has_dma(dev->id)) {
-				ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
-				dev->xfer_mode = XFER_MW_DMA_0;
-				dev->xfer_shift = ATA_SHIFT_MWDMA;
-				dev->flags &= ~ATA_DFLAG_PIO;
-			} else {
-				ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
-				dev->xfer_mode = XFER_PIO_0;
-				dev->xfer_shift = ATA_SHIFT_PIO;
-				dev->flags |= ATA_DFLAG_PIO;
-			}
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = XFER_MW_DMA_0;
+		/* We do need the right mode information for DMA or PIO
+		   and this comes from the current configuration flags */
+		if (ata_id_has_dma(dev->id)) {
+			ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
+			dev->xfer_mode = XFER_MW_DMA_0;
+			dev->xfer_shift = ATA_SHIFT_MWDMA;
+			dev->flags &= ~ATA_DFLAG_PIO;
+		} else {
+			ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+			dev->xfer_mode = XFER_PIO_0;
+			dev->xfer_shift = ATA_SHIFT_PIO;
+			dev->flags |= ATA_DFLAG_PIO;
 		}
 	}
 	return 0;

Index: work/drivers/ata/pata_ixp4xx_cf.c
===================================================================
@@ -30,14 +30,12 @@ static int ixp4xx_set_mode(struct ata_li
 {
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, link) {
-		if (ata_dev_enabled(dev)) {
-			ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-			dev->pio_mode = XFER_PIO_0;
-			dev->xfer_mode = XFER_PIO_0;
-			dev->xfer_shift = ATA_SHIFT_PIO;
-			dev->flags |= ATA_DFLAG_PIO;
-		}
+	ata_for_each_dev(dev, link, ENABLED) {
+		ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
+		dev->pio_mode = XFER_PIO_0;
+		dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
 	}
 	return 0;
 }

Index: work/drivers/ata/pata_legacy.c
===================================================================
@@ -194,15 +194,12 @@ static int legacy_set_mode(struct ata_li
 {
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, link) {
-		if (ata_dev_enabled(dev)) {
-			ata_dev_printk(dev, KERN_INFO,
-						"configured for PIO\n");
-			dev->pio_mode = XFER_PIO_0;
-			dev->xfer_mode = XFER_PIO_0;
-			dev->xfer_shift = ATA_SHIFT_PIO;
-			dev->flags |= ATA_DFLAG_PIO;
-		}
+	ata_for_each_dev(dev, link, ENABLED) {
+		ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+		dev->pio_mode = XFER_PIO_0;
+		dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
 	}
 	return 0;
 }

@@ -1028,7 +1025,7 @@ static __init int legacy_init_one(struct
 	/* Nothing found means we drop the port as its probably not there */
 
 	ret = -ENODEV;
-	ata_link_for_each_dev(dev, &ap->link) {
+	ata_for_each_dev(dev, &ap->link, ALL) {
 		if (!ata_dev_absent(dev)) {
 			legacy_host[probe->slot] = host;
 			ld->platform_dev = pdev;

Index: work/drivers/ata/pata_pdc2027x.c
===================================================================
@@ -406,23 +406,20 @@ static int pdc2027x_set_mode(struct ata_
 	if (rc < 0)
 		return rc;
 
-	ata_link_for_each_dev(dev, link) {
-		if (ata_dev_enabled(dev)) {
+	ata_for_each_dev(dev, link, ENABLED) {
+		pdc2027x_set_piomode(ap, dev);
 
-			pdc2027x_set_piomode(ap, dev);
+		/*
+		 * Enable prefetch if the device support PIO only.
+		 */
+		if (dev->xfer_shift == ATA_SHIFT_PIO) {
+			u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
+			ctcr1 |= (1 << 25);
+			iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
 
-			/*
-			 * Enable prefetch if the device support PIO only.
-			 */
-			if (dev->xfer_shift == ATA_SHIFT_PIO) {
-				u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
-				ctcr1 |= (1 << 25);
-				iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
-
-				PDPRINTK("Turn on prefetch\n");
-			} else {
-				pdc2027x_set_dmamode(ap, dev);
-			}
+			PDPRINTK("Turn on prefetch\n");
+		} else {
+			pdc2027x_set_dmamode(ap, dev);
 		}
 	}
 	return 0;

Index: work/drivers/ata/pata_platform.c
===================================================================
@@ -34,14 +34,12 @@ static int pata_platform_set_mode(struct
 {
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, link) {
-		if (ata_dev_enabled(dev)) {
-			/* We don't really care */
-			dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
-			dev->xfer_shift = ATA_SHIFT_PIO;
-			dev->flags |= ATA_DFLAG_PIO;
-			ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
-		}
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
 	}
 	return 0;
 }

Index: work/drivers/ata/pata_rz1000.c
===================================================================
@@ -38,15 +38,13 @@ static int rz1000_set_mode(struct ata_li
 {
 	struct ata_device *dev;
 
-	ata_link_for_each_dev(dev, link) {
-		if (ata_dev_enabled(dev)) {
-			/* We don't really care */
-			dev->pio_mode = XFER_PIO_0;
-			dev->xfer_mode = XFER_PIO_0;
-			dev->xfer_shift = ATA_SHIFT_PIO;
-			dev->flags |= ATA_DFLAG_PIO;
-			ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
-		}
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = XFER_PIO_0;
+		dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
 	}
 	return 0;
 }

Index: work/drivers/ata/sata_sil.c
===================================================================
@@ -278,7 +278,7 @@ static int sil_set_mode(struct ata_link
 	if (rc)
 		return rc;
 
-	ata_link_for_each_dev(dev, link) {
+	ata_for_each_dev(dev, link, ALL) {
 		if (!ata_dev_enabled(dev))
 			dev_mode[dev->devno] = 0;	/* PIO0/1/2 */
 		else if (dev->flags & ATA_DFLAG_PIO)

Index: work/drivers/ata/libata-core.c
===================================================================
@@ -6035,7 +6035,7 @@ static void ata_port_detach(struct ata_p
 	/* EH is now guaranteed to see UNLOADING - EH context belongs
 	 * to us.  Restore SControl and disable all existing devices.
 	 */
-	ata_for_each_link(link, ap, HOST_FIRST) {
+	ata_for_each_link(link, ap, PMP_FIRST) {
 		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
 		ata_for_each_dev(dev, link, ALL)
 			ata_dev_disable(dev);

Index: work/drivers/ata/libata-eh.c
===================================================================
@@ -491,6 +491,31 @@ enum blk_eh_timer_return ata_scsi_timed_
 	return ret;
 }
 
+static void ata_eh_unload(struct ata_port *ap)
+{
+	struct ata_link *link;
+	struct ata_device *dev;
+	unsigned long flags;
+
+	/* Restore SControl IPM and SPD for the next driver and
+	 * disable attached devices.
+	 */
+	ata_for_each_link(link, ap, PMP_FIRST) {
+		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
+		ata_for_each_dev(dev, link, ALL)
+			ata_dev_disable(dev);
+	}
+
+	/* freeze and set UNLOADED */
+	spin_lock_irqsave(ap->lock, flags);
+
+	ata_port_freeze(ap);			/* won't be thawed */
+	ap->pflags &= ~ATA_PFLAG_EH_PENDING;	/* clear pending from freeze */
+	ap->pflags |= ATA_PFLAG_UNLOADED;
+
+	spin_unlock_irqrestore(ap->lock, flags);
+}
+
 /**
  *	ata_scsi_error - SCSI layer error handler callback
  *	@host: SCSI host on which error occurred

@@ -621,8 +646,13 @@ void ata_scsi_error(struct Scsi_Host *ho
 		/* invoke EH, skip if unloading or suspended */
 		if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
 			ap->ops->error_handler(ap);
-		else
+		else {
+			/* if unloading, commence suicide */
+			if ((ap->pflags & ATA_PFLAG_UNLOADING) &&
+			    !(ap->pflags & ATA_PFLAG_UNLOADED))
+				ata_eh_unload(ap);
 			ata_eh_finish(ap);
+		}
 
 		/* process port suspend request */
 		ata_eh_handle_port_suspend(ap);

Index: work/include/linux/libata.h
===================================================================
@@ -213,10 +213,11 @@ enum {
 	ATA_PFLAG_FROZEN	= (1 << 2), /* port is frozen */
 	ATA_PFLAG_RECOVERED	= (1 << 3), /* recovery action performed */
 	ATA_PFLAG_LOADING	= (1 << 4), /* boot/loading probe */
-	ATA_PFLAG_UNLOADING	= (1 << 5), /* module is unloading */
 	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
 	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
 	ATA_PFLAG_RESETTING	= (1 << 8), /* reset in progress */
+	ATA_PFLAG_UNLOADING	= (1 << 9), /* driver is being unloaded */
+	ATA_PFLAG_UNLOADED	= (1 << 10), /* driver is unloaded */
 
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */

Index: work/drivers/ata/libata-core.c
===================================================================
@@ -6019,8 +6019,6 @@ int ata_host_activate(struct ata_host *h
 static void ata_port_detach(struct ata_port *ap)
 {
 	unsigned long flags;
-	struct ata_link *link;
-	struct ata_device *dev;
 
 	if (!ap->ops->error_handler)
 		goto skip_eh;

@@ -6028,28 +6026,15 @@ static void ata_port_detach(struct ata_p
 	/* tell EH we're leaving & flush EH */
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags |= ATA_PFLAG_UNLOADING;
+	ata_port_schedule_eh(ap);
 	spin_unlock_irqrestore(ap->lock, flags);
 
+	/* wait till EH commits suicide */
 	ata_port_wait_eh(ap);
 
-	/* EH is now guaranteed to see UNLOADING - EH context belongs
-	 * to us.  Restore SControl and disable all existing devices.
-	 */
-	ata_for_each_link(link, ap, PMP_FIRST) {
-		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
-		ata_for_each_dev(dev, link, ALL)
-			ata_dev_disable(dev);
-	}
-
-	/* Final freeze & EH.  All in-flight commands are aborted.  EH
-	 * will be skipped and retrials will be terminated with bad
-	 * target.
-	 */
-	spin_lock_irqsave(ap->lock, flags);
-	ata_port_freeze(ap);	/* won't be thawed */
-	spin_unlock_irqrestore(ap->lock, flags);
+	/* it better be dead now */
+	WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
 
-	ata_port_wait_eh(ap);
 	cancel_rearming_delayed_work(&ap->hotplug_task);
 
  skip_eh:

Index: work/drivers/ata/libata-core.c
===================================================================
@@ -4158,29 +4158,33 @@ static int cable_is_40wire(struct ata_po
 	struct ata_link *link;
 	struct ata_device *dev;
 
-	/* If the controller thinks we are 40 wire, we are */
+	/* If the controller thinks we are 40 wire, we are. */
 	if (ap->cbl == ATA_CBL_PATA40)
 		return 1;
-	/* If the controller thinks we are 80 wire, we are */
+
+	/* If the controller thinks we are 80 wire, we are. */
 	if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
 		return 0;
-	/* If the system is known to be 40 wire short cable (eg laptop),
-	   then we allow 80 wire modes even if the drive isn't sure */
+
+	/* If the system is known to be 40 wire short cable (eg
+	 * laptop), then we allow 80 wire modes even if the drive
+	 * isn't sure.
+	 */
 	if (ap->cbl == ATA_CBL_PATA40_SHORT)
 		return 0;
-	/* If the controller doesn't know we scan
 
-	   - Note: We look for all 40 wire detects at this point.
-	     Any 80 wire detect is taken to be 80 wire cable
-	     because
-	     - In many setups only the one drive (slave if present)
-               will give a valid detect
-             - If you have a non detect capable drive you don't
-               want it to colour the choice
-        */
+	/* If the controller doesn't know, we scan.
+	 *
+	 * Note: We look for all 40 wire detects at this point.  Any
+	 *       80 wire detect is taken to be 80 wire cable because
+	 * - in many setups only the one drive (slave if present) will
+	 *   give a valid detect
+	 * - if you have a non detect capable drive you don't want it
+	 *   to colour the choice
+	 */
 	ata_port_for_each_link(link, ap) {
 		ata_link_for_each_dev(dev, link) {
-			if (!ata_is_40wire(dev))
+			if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
 				return 0;
 		}
 	}

Index: work/drivers/ata/libata-eh.c
===================================================================
@@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *ho
 			ata_link_for_each_dev(dev, link) {
 				int devno = dev->devno;
 
+				if (!ata_dev_enabled(dev))
+					continue;
+
 				ehc->saved_xfer_mode[devno] = dev->xfer_mode;
 				if (ata_ncq_enabled(dev))
 					ehc->saved_ncq_enabled |= 1 << devno;

@@ -2790,6 +2793,9 @@ int ata_set_mode(struct ata_link *link,
 
 	/* if data transfer is verified, clear DUBIOUS_XFER on ering top */
 	ata_link_for_each_dev(dev, link) {
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
 			struct ata_ering_entry *ent;
 

@@ -2811,6 +2817,9 @@ int ata_set_mode(struct ata_link *link,
 		u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
 		u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
 
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (dev->xfer_mode != saved_xfer_mode ||
 		    ata_ncq_enabled(dev) != saved_ncq)
 			dev->flags |= ATA_DFLAG_DUBIOUS_XFER;