RTL8187B transmit problems
Hi,
I did some new tests to see what's my transmission problems with rtl8187b. I can associate and can send pings (and even to connect through ssh with other hosts) but i can't transmit "big" files. But at first mail I didn't know how big must be a "big" file.
I tested with 64, 128, 256, 512, 1024 and 2048 bytes files. From 64 to 512 I always can transmit the file. 1024 sometimes hangs and 2048 always hangs. All files can be transmitted using rt73usb wireless.
I put the tcpdump output of those tests in:
http://www.slackware.com/~piterpunk/transmittests/
The 512-byte file dump is almost equal for both wireless cards. 2048-byte is very different. All logs are scp from my machine to slackware.com. But the same happens sending mail (but not receiving), uploading ftp files, doing scp to other machines, etc...
I'll be very happy to provide any extra information or do additional tests with the cards to help the problem diagnostics. Changing the rate didn't have any influence in test results. I have an iwl3945 that works fine, too.
Thanks in advance!
Piter PUNK
Signature · 7 lines
| E-Mail: [email protected] .|. /V\ // \\ UIN:116043354 Homepage:http://piterpunk.info02.com.br /( )\ ^`~'^ ----> Slackware Linux <---- #105432
Quoted 11 lines · Piter PUNK
Hi,
I did some new tests to see what's my transmission problems with rtl8187b. I can associate and can send pings (and even to connect through ssh with other hosts) but i can't transmit "big" files. But at first mail I didn't know how big must be a "big" file.
I tested with 64, 128, 256, 512, 1024 and 2048 bytes files. From 64 to 512 I always can transmit the file. 1024 sometimes hangs and 2048 always hangs. All files can be transmitted using rt73usb wireless.
I have not downloaded your tcpdump file yet to see your details. On my system, I am unable to duplicate your results. I used dd with /dev/urandom as the source to create files of 1024, 2048, 4096, 8192, 16384, and 32768 bytes. All of these could be transmitted to a second host on my local network using scp.
What are the details of your device? Please post the output of 'dmesg | grep -i rtl'.
Larry
Quoted 2 lines · Larry Finger
What are the details of your device? Please post the output of 'dmesg | grep -i rtl'.
This is the built-in rtl8187b adapter:
usb 1-1: new high speed USB device using ehci_hcd and address 7 usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=0bda, idProduct=8189
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: RTL8187B_WLAN_Adapter
usb 1-1: Manufacturer: Manufacturer_Realtek
usb 1-1: SerialNumber: 00e04c000001
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
phy3: Selected rate control algorithm 'pid'
phy3: hwaddr 00:16:44:aa:df:bf, RTL8187BvE V0 + rtl8225z2
This is my external rtl8187b USB dongle:
usb 1-3: new high speed USB device using ehci_hcd and address 8 usb 1-3: configuration #1 chosen from 1 choice
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
phy4: Selected rate control algorithm 'pid'
phy4: hwaddr 00:18:e7:42:2c:23, RTL8187BvE V0 + rtl8225z2
usb 1-3: New USB device found, idVendor=0bda, idProduct=8189
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: RTL8187B_WLAN_Adapter
usb 1-3: Manufacturer: Manufacturer_Realtek
usb 1-3: SerialNumber: 00e04c000001
Both have the same "not-working" results. Using any of my other adapters the transmission works fine. (ok, it didn't work with USB Marvell dongle... but it isn't even detected)
Thanks!
Piter PUNK
Signature · 7 lines
| E-Mail: [email protected] .|. /V\ // \\ UIN:116043354 Homepage:http://piterpunk.info02.com.br /( )\ ^`~'^ ----> Slackware Linux <---- #105432
Quoted 35 lines · Piter PUNK
Quoted 3 lines · Larry Finger
What are the details of your device? Please post the output of 'dmesg | grep -i
rtl'.This is the built-in rtl8187b adapter:
usb 1-1: new high speed USB device using
ehci_hcdand address 7 usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=0bda, idProduct=8189 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product:RTL8187B_WLAN_Adapter
usb 1-1: Manufacturer:Manufacturer_Realtek
usb 1-1: SerialNumber:00e04c000001
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
phy3: Selected rate control algorithm 'pid'
phy3: hwaddr 00:16:44:aa:df:bf, RTL8187BvE V0 + rtl8225z2This is my external rtl8187b USB dongle:
usb 1-3: new high speed USB device using
ehci_hcdand address 8 usb 1-3: configuration #1 chosen from 1 choice
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
phy4: Selected rate control algorithm 'pid'
phy4: hwaddr 00:18:e7:42:2c:23, RTL8187BvE V0 + rtl8225z2 usb 1-3: New USB device found, idVendor=0bda, idProduct=8189 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product:RTL8187B_WLAN_Adapter
usb 1-3: Manufacturer:Manufacturer_Realtek
usb 1-3: SerialNumber:00e04c000001
Quoted 3 lines
Both have the same "not-working" results. Using any of my other adapters the transmission works fine. (ok, it didn't work with USB Marvell dongle... but it isn't even detected)
My device is a little different that yours:
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
rtl8187: inconsistency between id with OEM info!
phy1: Selected rate control algorithm 'pid'
phy1: hwaddr 00:11:6b:3e:c4:0a, RTL8187BvB(early) V0 + rtl8225z2
I'll review the code to look at the differences in paths for your device and mine. Just in case there is a data dependency, please send me (privately) your 2048 byte file.
Thanks,
Larry
Quoted 25 lines · Larry Finger
Quoted 14 lines · Piter PUNK
This is the built-in rtl8187b adapter:
usb 1-1: new high speed USB device using
ehci_hcdand address 7 usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=0bda, idProduct=8189 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product:RTL8187B_WLAN_Adapter
usb 1-1: Manufacturer:Manufacturer_Realtek
usb 1-1: SerialNumber:00e04c000001
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
phy3: Selected rate control algorithm 'pid'
phy3: hwaddr 00:16:44:aa:df:bf, RTL8187BvE V0 + rtl8225z2My device is a little different that yours:
rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
hardware, use at your own risk
rtl8187: inconsistency between id with OEM info!
phy1: Selected rate control algorithm 'pid'
phy1: hwaddr 00:11:6b:3e:c4:0a, RTL8187BvB(early) V0 + rtl8225z2
Quoted 3 lines
I'll review the code to look at the differences in paths for your device and mine. Just in case there is a data dependency, please send me (privately) your 2048 byte file.
Is an all zeroed file: dd if=/dev/zero of=file2048 count=2048 bs=1 Data is independent and, maybe, I can transmit something between 1024 and 2048 bytes; not tested yet. I only begin those tests with files with different sizes to "see" why I can connect with SSH, browse in web, download my mails... and can't send mail, upload files or fill web forms.
Feel free to suggest other tests. I have many wireless devices and access points available to test.
Thanks!
Piter PUNK
Signature · 7 lines
| E-Mail: [email protected] .|. /V\ // \\ UIN:116043354 Homepage:http://piterpunk.info02.com.br /( )\ ^`~'^ ----> Slackware Linux <---- #105432