New: without serial console system doesn't poweroff
A message that is not in the archive (sent off-list or not yet received): [email protected]/
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalled
Quoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.
OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit 3b987ac961486373f91191b14291b331fa546072
Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200
ACPI suspend: Always use the 32-bit waking vector
commit a6629105dd03d370fcb31e97bddf223fa4bb651e upstream.
commit 66036f5862883fcc9f7ff8550685a5a3de1a57e4
Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200
ACPI Suspend: Enable ACPI during resume if SCI_EN is not set
commit d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768 upstream.
presumably 2.6.28-rc3 is also broken?
Andrew Morton napsal(a):
Quoted 77 lines
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalledQuoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit
3b987ac961486373f91191b14291b331fa546072Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200ACPI suspend: Always use the 32-bit waking vector
commit
a6629105dd03d370fcb31e97bddf223fa4bb651eupstream.commit
66036f5862883fcc9f7ff8550685a5a3de1a57e4Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200
Quoted 7 lines
ACPI Suspend: Enable ACPI during resume if
SCI_ENis not setcommit
d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768upstream.presumably 2.6.28-rc3 is also broken?
I don't know I can test it on Thu. But may be may fault or misunderstanding fist kernel which I test is 2.27.2. I don't test any kernel before. I don't know if 2.6.26 works.
Dan
Quoted 80 lines · Daniel Smolik
Andrew Morton napsal(a):
Quoted 79 lines
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalledQuoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit
3b987ac961486373f91191b14291b331fa546072Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200ACPI suspend: Always use the 32-bit waking vector
commit
a6629105dd03d370fcb31e97bddf223fa4bb651eupstream.commit
66036f5862883fcc9f7ff8550685a5a3de1a57e4Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200ACPI Suspend: Enable ACPI during resume if
SCI_ENis not set
Quoted 7 lines
Quoted 5 lines
commit d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768 upstream.presumably 2.6.28-rc3 is also broken?
I don't know I can test it on Thu. But may be may fault or misunderstanding fist kernel which I test is 2.27.2. I don't test any kernel before. I don't know if 2.6.26 works.
Can you try 2.6.26, please?
Rafael
Rafael J. Wysocki napsal(a):
Quoted 80 lines · Daniel Smolik
Quoted 79 lines
Andrew Morton napsal(a):
Quoted 78 lines
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalledQuoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit
3b987ac961486373f91191b14291b331fa546072Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200ACPI suspend: Always use the 32-bit waking vector
commit
a6629105dd03d370fcb31e97bddf223fa4bb651eupstream.commit
66036f5862883fcc9f7ff8550685a5a3de1a57e4Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200ACPI Suspend: Enable ACPI during resume if
SCI_ENis not set
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
commit d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768 upstream.presumably 2.6.28-rc3 is also broken?
I don't know I can test it on Thu. But may be may fault or misunderstanding fist kernel which I test is 2.27.2. I don't test any kernel before. I don't know if 2.6.26 works.
Can you try 2.6.26, please?
Yes, no problem.
Dan
Quoted 85 lines · Daniel Smolik
Rafael J. Wysocki napsal(a):
Quoted 84 lines · Daniel Smolik
Quoted 83 lines
Andrew Morton napsal(a):
Quoted 82 lines
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalledQuoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit
3b987ac961486373f91191b14291b331fa546072Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200ACPI suspend: Always use the 32-bit waking vector
commit
a6629105dd03d370fcb31e97bddf223fa4bb651eupstream.commit
66036f5862883fcc9f7ff8550685a5a3de1a57e4Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200ACPI Suspend: Enable ACPI during resume if
SCI_ENis not setcommit
d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768upstream.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
presumably 2.6.28-rc3 is also broken?
I don't know I can test it on Thu. But may be may fault or misunderstanding fist kernel which I test is 2.27.2. I don't test any kernel before. I don't know if 2.6.26 works.
Can you try 2.6.26, please?
Yes, no problem.
And did it work?
Rafael
Rafael J. Wysocki napsal(a):
Quoted 86 lines · Daniel Smolik
Quoted 85 lines
Rafael J. Wysocki napsal(a):
Quoted 84 lines · Daniel Smolik
Quoted 83 lines
Andrew Morton napsal(a):
Quoted 82 lines
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalledQuoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit
3b987ac961486373f91191b14291b331fa546072Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200ACPI suspend: Always use the 32-bit waking vector
commit
a6629105dd03d370fcb31e97bddf223fa4bb651eupstream.commit
66036f5862883fcc9f7ff8550685a5a3de1a57e4Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200ACPI Suspend: Enable ACPI during resume if
SCI_ENis not setcommit
d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768upstream.
Quoted 8 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line
presumably 2.6.28-rc3 is also broken?
I don't know I can test it on Thu. But may be may fault or misunderstanding fist kernel which I test is 2.27.2. I don't test any kernel before. I don't know if 2.6.26 works.
Can you try 2.6.26, please?
Yes, no problem.
And did it work?
Rafael
Sorry, I compile kernel but still didn't test. I try it on Monday.
Dan
Rafael J. Wysocki napsal(a):
Quoted 86 lines · Daniel Smolik
Quoted 85 lines
Rafael J. Wysocki napsal(a):
Quoted 84 lines · Daniel Smolik
Quoted 83 lines
Andrew Morton napsal(a):
Quoted 82 lines
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 44 lines · On Wed, 29 Oct 2008 04:06:11 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11886
Summary: without serial console system doesn't poweroff
Product: Power Management
Version: 2.5
KernelVersion: 2.6.27.4
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version:
Earliest failing kernel version:2.6.27.2
Distribution: Debian Etch
Hardware Environment: Supermiro C2SBC-Q Dual Core Intel Cpu 1G RAM Software Environment: Debian Etch
Problem Description: If I does't add serial console to kernel command line system doesn't poweroff. Linux hangs there:e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...If I disable in kernel config Suspend to Ram and Hibernate all works without console. But with Suspend and hibernate enabled and serial console added to kernel cmd line all works too:
e1000e 0000:0d:00.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S5
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Power down.acpi_power_offcalledQuoted 3 lines
Steps to reproduce:
Compile kernel with attached config and try poweroff without serial console.OK, this is weird.
But the good news is that there is a very small number of commits between 2.6.27.2 and 2.6.27.4.
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.3 ftp://ftp.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.27.4
I'd be looking at these:
commit
3b987ac961486373f91191b14291b331fa546072Author: Rafael J. Wysocki <[email protected]> Date: Sat Sep 6 13:13:01 2008 +0200ACPI suspend: Always use the 32-bit waking vector
commit
a6629105dd03d370fcb31e97bddf223fa4bb651eupstream.commit
66036f5862883fcc9f7ff8550685a5a3de1a57e4Author: Rafael J. Wysocki <[email protected]> Date: Sat Oct 4 00:05:05 2008 +0200ACPI Suspend: Enable ACPI during resume if
SCI_ENis not setcommit
d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768upstream.
Quoted 8 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line
presumably 2.6.28-rc3 is also broken?
I don't know I can test it on Thu. But may be may fault or misunderstanding fist kernel which I test is 2.27.2. I don't test any kernel before. I don't know if 2.6.26 works.
Can you try 2.6.26, please?
Yes, no problem.
And did it work?
Rafael
I today test 2.6.26 and it works OK.
Dan
On Monday, 10 of November 2008, Daniel Smolik wrote:
[--snip--]
Quoted 1 line
I today test 2.6.26 and it works OK.
OK
Please check if this commit helps
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8d00450d296dedec9ada38d43b83e79cca6fd5a3
If not, the fastest way to find the failing commit would probably be to carry out bisection of kernels between 2.6.26 (good) and 2.6.27 (presumably bad as well as 2.6.27.2).