ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers
PATCH v5 2/13 ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers
Subject: [PATCH 02/13 v5] ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers
From: Dirk Behme <[email protected]>
Add i2c, memory, omap3 and function prototype headers
---
Changes in version v5:
- Additonal space changes as proposed by Jean-Christophe PLAGNIOL-VILLARD
Changes in version v3:
- Replace space by tabs in headers as proposed by Jean-Christophe PLAGNIOL-VILLARD
include/asm-arm/arch-omap3/i2c.h | 128 +++++++++++++++++++ include/asm-arm/arch-omap3/mem.h | 221 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-omap3/omap3.h | 135 ++++++++++++++++++++ include/asm-arm/arch-omap3/sys_proto.h | 70 ++++++++++ 4 files changed, 554 insertions(+)
include/asm-arm/arch-omap3/i2c.h new file +128 -0
@@ -0,0 +1,128 @@ +/* +* (C) Copyright 2004-2008 +* Texas Instruments, <www.ti.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#ifndef _I2C_H_ +#define _I2C_H_ + +#define I2C_DEFAULT_BASE I2C_BASE1 + +#define I2C_REV (I2C_DEFAULT_BASE + 0x00) +#define I2C_IE (I2C_DEFAULT_BASE + 0x04) +#define I2C_STAT (I2C_DEFAULT_BASE + 0x08) +#define I2C_IV (I2C_DEFAULT_BASE + 0x0c) +#define I2C_BUF (I2C_DEFAULT_BASE + 0x14) +#define I2C_CNT (I2C_DEFAULT_BASE + 0x18) +#define I2C_DATA (I2C_DEFAULT_BASE + 0x1c) +#define I2C_SYSC (I2C_DEFAULT_BASE + 0x20) +#define I2C_CON (I2C_DEFAULT_BASE + 0x24) +#define I2C_OA (I2C_DEFAULT_BASE + 0x28) +#define I2C_SA (I2C_DEFAULT_BASE + 0x2c) +#define I2C_PSC (I2C_DEFAULT_BASE + 0x30) +#define I2C_SCLL (I2C_DEFAULT_BASE + 0x34) +#define I2C_SCLH (I2C_DEFAULT_BASE + 0x38) +#define I2C_SYSTEST (I2C_DEFAULT_BASE + 0x3c) + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4)/* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3)/* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2)/* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1)/* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0)/* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15)/* Single byte data */ +#define I2C_STAT_BB (1 << 12)/* Bus busy */ +#define I2C_STAT_ROVR (1 << 11)/* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10)/* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9)/* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4)/* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3)/* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2)/* Register access ready */ +#define I2C_STAT_NACK (1 << 1)/* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0)/* Arbitration lost interrupt enable */ + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1/* Arbitration lost */ +#define I2C_INTCODE_NAK 2/* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3/* Register access ready */ +#define I2C_INTCODE_RRDY 4/* Rcv data ready */ +#define I2C_INTCODE_XRDY 5/* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15)/* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7)/* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15)/* I2C module enable */ +#define I2C_CON_BE (1 << 14)/* Big endian mode */ +#define I2C_CON_STB (1 << 11)/* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10)/* Master/slave mode */ +#define I2C_CON_TRX (1 << 9)/* Transmitter/receiver mode */ +/* (master mode only) */ +#define I2C_CON_XA (1 << 8)/* Expand address */ +#define I2C_CON_STP (1 << 1)/* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0)/* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15)/* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14)/* Free running mode, on brkpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12)/* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12)/* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3)/* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2)/* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1)/* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0)/* SDA line drive output value */ + +#define I2C_SCLL_SCLL (0) +#define I2C_SCLL_SCLL_M (0xFF) +#define I2C_SCLL_HSSCLL (8) +#define I2C_SCLH_HSSCLL_M (0xFF) +#define I2C_SCLH_SCLH (0) +#define I2C_SCLH_SCLH_M (0xFF) +#define I2C_SCLH_HSSCLH (8) +#define I2C_SCLH_HSSCLH_M (0xFF) + +#define OMAP_I2C_STANDARD 100 +#define OMAP_I2C_FAST_MODE 400 +#define OMAP_I2C_HIGH_SPEED 3400 + +#define SYSTEM_CLOCK_12 12000 +#define SYSTEM_CLOCK_13 13000 +#define SYSTEM_CLOCK_192 19200 +#define SYSTEM_CLOCK_96 96000 + +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#define I2C_PSC_MAX (0x0f) +#define I2C_PSC_MIN (0x00) + +#endif /* _I2C_H_ */
include/asm-arm/arch-omap3/mem.h new file +221 -0
221 lines not on this page · raw message
include/asm-arm/arch-omap3/omap3.h new file +135 -0
135 lines not on this page · raw message
include/asm-arm/arch-omap3/sys_proto.h new file +70 -0
70 lines not on this page · raw message
PATCH v5 2/13 ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers
Dear dirk.behme at googlemail.com,
Quoted 7 lines · In message <[email protected]> you wrote:
Subject: [PATCH 02/13 v5] ARM: OMAP3: Add i2c, memory, omap3 and function prototype headers
From: Dirk Behme <[email protected]>
Add i2c, memory, omap3 and function prototype headers
Signed-off-by Dirk Behme <[email protected]>
...
include/asm-arm/arch-omap3/omap3.h line 36
Quoted 8 lines
include/asm-arm/arch-omap3/omap3.h new file +8
-0+/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 + +/* GPMC */ +#define OMAP34XX_GPMC_BASE (0x6E000000) + +/* SMS */ +#define OMAP34XX_SMS_BASE 0x6C000000
Please use a consistent style. Plain numbers don't need parens, so why does OMAP34XX_GPMC_BASE neeed them?
...
include/asm-arm/arch-omap3/omap3.h line 77
Quoted 10 lines
include/asm-arm/arch-omap3/omap3.h new file +10
-0+#define OMAP34XX_GPT11 0x48088000 +#define OMAP34XX_GPT12 0x48304000 + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE (0x4830C000) +#define WD2_BASE (0x48314000) +#define WD3_BASE (0x49030000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (0x48320000)
Ditto.
[and so on.]
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The release of emotion is what keeps us health. Emotionally healthy." "That may be, Doctor. However, I have noted that the healthy release of emotion is frequently unhealthy for those closest to you." -- McCoy and Spock, "Plato's Stepchildren", stardate 5784.3