TV @nywhere Plus

Hi.

I would appreciate if anybody can tell me how do I get remote control working for "MSI TV @nywhere Plus" TV-card

http://global.msi.com.tw/index.php?func=proddesc&maincat_no=132&prod_no=616

The card is supported by saa7134 and the tuner itself is (as far as I can tell) is TDA827X
lspci -v -n says

    02:08.0 0480: 1131:7133 (rev d1)
            Subsystem: 1462:6231
    ....

I run self-configured and compiled vanilla kernel 2.6.27 . I was not able to find out whether the remote is supported by Linux. Neither dmesg output nor boot messages talk about anything related to remote control.
I also don't recognize whether any entries in /dev or /sys have something to do with it.

Googling yields some old patches that worked for some people and did not work for others - but they definitely can't be applied to current source code.

So is there any chance? What should I be looking for? --
Thanks
rastos

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Hi rastos,

Am Donnerstag, den 06.11.2008, 23:32 +0100 schrieb [email protected]:

the patches are only applied at 2.6.28 or you need to install the current mercurial v4l-dvb at linuxtv.org on older kernels.

Cheers,
Hermann

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list