HVR2250 / HVR2200 / SAA7164 status
Steven Toth wrote:
As you know, I'm writing a driver for the SAA7164 chipset, for the HVR2200 DVB-T and HVR2250 ATSC/QAM products.
People have been asking for status, here's where I am.
Do I have anything to share with people yet? Not yet.
The basic driver framework is done. Firmware is loading, I can talking to the silicon through the proprietary PCIe ring buffer interface. I2C is working, eeprom and tuner/demod access is done. The HVR2250 is responding to azap commands, the tuners and demods are locking, snr looks pretty good... it's going to be a popular board for people. The HVR2200 (DVB-T Version) should also worked with tzap, it's untested and I can't comment on SNR at this stage. I need to add the DMA/buffering code, this is the missing pieces before a first public release. When I have anything to share I'll put up a tree and post a 'testers required' message here.
We're a couple episodes into this fall television season and I'm missing my shows. ;)
Having another month down, I wanted to send a friendly nudge your direction, Steve, to see how this is progressing.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 23 lines · Joe Julian
Steven Toth wrote:
As you know, I'm writing a driver for the SAA7164 chipset, for the HVR2200 DVB-T and HVR2250 ATSC/QAM products.
People have been asking for status, here's where I am.
Do I have anything to share with people yet? Not yet.
The basic driver framework is done. Firmware is loading, I can talking to the silicon through the proprietary PCIe ring buffer interface. I2C is working, eeprom and tuner/demod access is done. The HVR2250 is responding to azap commands, the tuners and demods are locking, snr looks pretty good... it's going to be a popular board for people. The HVR2200 (DVB-T Version) should also worked with tzap, it's untested and I can't comment on SNR at this stage. I need to add the DMA/buffering code, this is the missing pieces before a first public release. When I have anything to share I'll put up a tree and post a 'testers required' message here.
Quoted 5 lines
We're a couple episodes into this fall television season and I'm missing my shows. ;)
Having another month down, I wanted to send a friendly nudge your direction, Steve, to see how this is progressing.
:)
I hear you!
Nothing to report lately. The S2API and the Plumbers conf took a lot of my time, I'm only now getting back into a regular linux schedule.
Feel free to ping me through this mailing list every few weeks.
- Steve
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 39 lines · Steven Toth
Quoted 23 lines · Joe Julian
Steven Toth wrote:
As you know, I'm writing a driver for the SAA7164 chipset, for the HVR2200 DVB-T and HVR2250 ATSC/QAM products.
People have been asking for status, here's where I am.
Do I have anything to share with people yet? Not yet.
The basic driver framework is done. Firmware is loading, I can talking to the silicon through the proprietary PCIe ring buffer interface. I2C is working, eeprom and tuner/demod access is done. The HVR2250 is responding to azap commands, the tuners and demods are locking, snr looks pretty good... it's going to be a popular board for people. The HVR2200 (DVB-T Version) should also worked with tzap, it's untested and I can't comment on SNR at this stage. I need to add the DMA/buffering code, this is the missing pieces before a first public release. When I have anything to share I'll put up a tree and post a 'testers required' message here.
Quoted 6 lines
We're a couple episodes into this fall television season and I'm missing my shows. ;)
Having another month down, I wanted to send a friendly nudge your direction, Steve, to see how this is progressing.
:)
I hear you!
Nothing to report lately. The S2API and the Plumbers conf took a lot of my time, I'm only now getting back into a regular linux schedule.
Quoted 9 lines
Feel free to ping me through this mailing list every few weeks.
- Steve
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi!
I'm going to go ahead and feel free to ask if you have made any progress with the HVR2200? :)
//Markus
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb