Bugs in ath5k on aspire one (AR2425)
Hi,
I captured few errors in dmesg, will post them here. If I see more errors, I add them to this thread.
[ 69.516498] ath5k phy0: gain calibration timeout (2412MHz) [ 69.516509] ath5k phy0: can't reset hardware (-11) [ 69.516516] phy0: failed to restore operational channel after scan [ 69.628572] ath5k phy0: noise floor calibration failed (2412MHz) [ 69.686894] ath5k phy0: noise floor calibration failed (2417MHz) [ 69.770067] ath5k phy0: noise floor calibration failed (2417MHz) [ 70.419785] ath5k phy0: gain calibration timeout (2422MHz) [ 70.419800] ath5k phy0: can't reset hardware (-11) [ 70.419809] phy0: failed to set freq to 2422 MHz for scan [ 71.356436] ath5k phy0: gain calibration timeout (2427MHz) [ 71.356450] ath5k phy0: can't reset hardware (-11) [ 71.356458] phy0: failed to set freq to 2427 MHz for scan [ 72.119219] ath5k phy0: gain calibration timeout (2432MHz) [ 72.119234] phy0: failed to set freq to 2432 MHz for scan [ 72.764447] phy0: failed to set freq to 2437 MHz for scan [ 73.410438] phy0: failed to set freq to 2442 MHz for scan [ 74.027807] phy0: failed to set freq to 2447 MHz for scan [ 74.640495] __ratelimit: 7 callbacks suppressed [ 74.640504] ath5k phy0: gain calibration timeout (2452MHz) [ 74.640511] ath5k phy0: can't reset hardware (-11) [ 74.640517] phy0: failed to set freq to 2452 MHz for scan [ 75.256551] ath5k phy0: gain calibration timeout (2457MHz) [ 75.256565] ath5k phy0: can't reset hardware (-11) [ 75.256573] phy0: failed to set freq to 2457 MHz for scan [ 75.874414] ath5k phy0: gain calibration timeout (2462MHz) [ 75.874424] ath5k phy0: can't reset hardware (-11) [ 75.874430] phy0: failed to set freq to 2462 MHz for scan [ 76.488436] ath5k phy0: gain calibration timeout (2412MHz) [ 76.488447] ath5k phy0: can't reset hardware (-11) [ 76.488452] phy0: failed to restore operational channel after scan [ 76.488543] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.688125] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.889098] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 77.088122] wlan0: authentication with AP 00:1b:9e:d8:77:02 timed out [ 78.415786] ath5k phy0: noise floor calibration timeout (2417MHz) [ 78.810771] ath5k phy0: gain calibration timeout (2417MHz) [ 78.810782] phy0: failed to set freq to 2417 MHz for scan [ 79.427510] phy0: failed to set freq to 2422 MHz for scan [ 80.056900] __ratelimit: 3 callbacks suppressed [ 80.056910] ath5k phy0: gain calibration timeout (2427MHz) [ 80.056919] ath5k phy0: can't reset hardware (-11) [ 80.056925] phy0: failed to set freq to 2427 MHz for scan [ 80.670529] ath5k phy0: gain calibration timeout (2432MHz) [ 80.670540] ath5k phy0: can't reset hardware (-11) [ 80.670546] phy0: failed to set freq to 2432 MHz for scan [ 81.285272] ath5k phy0: gain calibration timeout (2437MHz) [ 81.285285] ath5k phy0: can't reset hardware (-11) [ 81.285294] phy0: failed to set freq to 2437 MHz for scan [ 81.911449] ath5k phy0: gain calibration timeout (2442MHz) [ 81.911461] ath5k phy0: can't reset hardware (-11) [ 81.911470] phy0: failed to set freq to 2442 MHz for scan [ 82.526023] ath5k phy0: gain calibration timeout (2447MHz) [ 82.526034] ath5k phy0: can't reset hardware (-11) [ 82.526040] phy0: failed to set freq to 2447 MHz for scan [ 83.141962] phy0: failed to set freq to 2452 MHz for scan [ 83.759025] phy0: failed to set freq to 2457 MHz for scan [ 84.373688] phy0: failed to set freq to 2462 MHz for scan [ 84.990322] phy0: failed to restore operational channel after scan [ 89.419876] __ratelimit: 8 callbacks suppressed [ 89.419890] ath5k phy0: noise floor calibration timeout (2412MHz) [ 90.087509] ath5k phy0: gain calibration timeout (2417MHz) [ 90.087519] ath5k phy0: can't reset hardware (-11) [ 90.087525] phy0: failed to set freq to 2417 MHz for scan [ 90.700892] ath5k phy0: gain calibration timeout (2422MHz) [ 90.700903] ath5k phy0: can't reset hardware (-11) [ 90.700909] phy0: failed to set freq to 2422 MHz for scan [ 91.315752] ath5k phy0: gain calibration timeout (2427MHz) [ 91.315763] ath5k phy0: can't reset hardware (-11) [ 91.315770] phy0: failed to set freq to 2427 MHz for scan [ 91.935144] ath5k phy0: gain calibration timeout (2432MHz) [ 91.935155] ath5k phy0: can't reset hardware (-11) [ 91.935161] phy0: failed to set freq to 2432 MHz for scan [ 92.550491] ath5k phy0: gain calibration timeout (2437MHz) [ 92.550505] phy0: failed to set freq to 2437 MHz for scan [ 93.220305] phy0: failed to set freq to 2442 MHz for scan [ 93.837228] phy0: failed to set freq to 2447 MHz for scan [ 94.450800] phy0: failed to set freq to 2452 MHz for scan [ 95.069019] phy0: failed to set freq to 2457 MHz for scan [ 95.690239] __ratelimit: 9 callbacks suppressed [ 95.690251] ath5k phy0: gain calibration timeout (2462MHz) [ 95.690261] ath5k phy0: can't reset hardware (-11) [ 95.690269] phy0: failed to set freq to 2462 MHz for scan [ 96.305163] ath5k phy0: gain calibration timeout (2412MHz) [ 96.305173] ath5k phy0: can't reset hardware (-11) [ 96.305179] phy0: failed to restore operational channel after scan [ 100.084643] ath5k phy0: noise floor calibration failed (2412MHz) [ 100.689317] ath5k phy0: gain calibration timeout (2417MHz) [ 100.689328] ath5k phy0: can't reset hardware (-11) [ 100.689334] phy0: failed to set freq to 2417 MHz for scan [ 101.308123] ath5k phy0: gain calibration timeout (2422MHz) [ 101.308134] ath5k phy0: can't reset hardware (-11) [ 101.308140] phy0: failed to set freq to 2422 MHz for scan [ 101.923409] ath5k phy0: gain calibration timeout (2427MHz) [ 101.923419] ath5k phy0: can't reset hardware (-11) [ 101.923425] phy0: failed to set freq to 2427 MHz for scan [ 102.536898] ath5k phy0: gain calibration timeout (2432MHz) [ 102.536911] ath5k phy0: can't reset hardware (-11) [ 102.536920] phy0: failed to set freq to 2432 MHz for scan [ 103.153227] ath5k phy0: gain calibration timeout (2437MHz) [ 103.153238] ath5k phy0: can't reset hardware (-11) [ 103.153244] phy0: failed to set freq to 2437 MHz for scan [ 103.766742] ath5k phy0: gain calibration timeout (2442MHz) [ 103.766753] ath5k phy0: can't reset hardware (-11) [ 103.766759] phy0: failed to set freq to 2442 MHz for scan [ 104.382792] phy0: failed to set freq to 2447 MHz for scan [ 104.998713] phy0: failed to set freq to 2452 MHz for scan [ 105.612695] phy0: failed to set freq to 2457 MHz for scan [ 106.227980] phy0: failed to set freq to 2462 MHz for scan [ 106.846579] __ratelimit: 8 callbacks suppressed [ 106.846591] ath5k phy0: gain calibration timeout (2412MHz) [ 106.846601] ath5k phy0: can't reset hardware (-11) [ 106.846609] phy0: failed to restore operational channel after scan [ 111.388603] ath5k phy0: noise floor calibration failed (2412MHz) [ 112.002756] ath5k phy0: gain calibration timeout (2417MHz) [ 112.002769] ath5k phy0: can't reset hardware (-11) [ 112.002776] phy0: failed to set freq to 2417 MHz for scan [ 112.618112] ath5k phy0: gain calibration timeout (2422MHz) [ 112.618123] ath5k phy0: can't reset hardware (-11) [ 112.618129] phy0: failed to set freq to 2422 MHz for scan [ 113.234943] ath5k phy0: gain calibration timeout (2427MHz) [ 113.234957] ath5k phy0: can't reset hardware (-11) [ 113.234965] phy0: failed to set freq to 2427 MHz for scan [ 113.855231] ath5k phy0: gain calibration timeout (2432MHz) [ 113.855242] ath5k phy0: can't reset hardware (-11) [ 113.855248] phy0: failed to set freq to 2432 MHz for scan
Happened on boot, and card stopped working.
Only a reboot helped.
When transferring large amounts of data from/to desktop pc, assotiation with ap is dropped often which results is minute/two of no wireless activety and this:
[ 1522.872096] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 1 [ 1523.072094] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 2 [ 1523.268098] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 3 [ 1523.477204] wlan0: direct probe to AP 00:1b:9e:d8:77:02 timed out [ 1524.569452] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 1524.571157] wlan0: authenticated [ 1524.571179] wlan0: associate with AP 00:1b:9e:d8:77:02 [ 1524.574284] wlan0: RX ReassocResp from 00:1b:9e:d8:77:02 (capab=0x411 status=0 aid=1)
Also when downloading from AP (from desktop) I see this:
ath5k phy0: unsupported jumbo
Best regards,
Maxim Levitsky
Quoted 132 lines · Maxim Levitsky
Hi,
I captured few errors in dmesg, will post them here. If I see more errors, I add them to this thread.
[ 69.516498] ath5k phy0: gain calibration timeout (2412MHz) [ 69.516509] ath5k phy0: can't reset hardware (-11) [ 69.516516] phy0: failed to restore operational channel after scan [ 69.628572] ath5k phy0: noise floor calibration failed (2412MHz) [ 69.686894] ath5k phy0: noise floor calibration failed (2417MHz) [ 69.770067] ath5k phy0: noise floor calibration failed (2417MHz) [ 70.419785] ath5k phy0: gain calibration timeout (2422MHz) [ 70.419800] ath5k phy0: can't reset hardware (-11) [ 70.419809] phy0: failed to set freq to 2422 MHz for scan [ 71.356436] ath5k phy0: gain calibration timeout (2427MHz) [ 71.356450] ath5k phy0: can't reset hardware (-11) [ 71.356458] phy0: failed to set freq to 2427 MHz for scan [ 72.119219] ath5k phy0: gain calibration timeout (2432MHz) [ 72.119234] phy0: failed to set freq to 2432 MHz for scan [ 72.764447] phy0: failed to set freq to 2437 MHz for scan [ 73.410438] phy0: failed to set freq to 2442 MHz for scan [ 74.027807] phy0: failed to set freq to 2447 MHz for scan [ 74.640495] __ratelimit: 7 callbacks suppressed [ 74.640504] ath5k phy0: gain calibration timeout (2452MHz) [ 74.640511] ath5k phy0: can't reset hardware (-11) [ 74.640517] phy0: failed to set freq to 2452 MHz for scan [ 75.256551] ath5k phy0: gain calibration timeout (2457MHz) [ 75.256565] ath5k phy0: can't reset hardware (-11) [ 75.256573] phy0: failed to set freq to 2457 MHz for scan [ 75.874414] ath5k phy0: gain calibration timeout (2462MHz) [ 75.874424] ath5k phy0: can't reset hardware (-11) [ 75.874430] phy0: failed to set freq to 2462 MHz for scan [ 76.488436] ath5k phy0: gain calibration timeout (2412MHz) [ 76.488447] ath5k phy0: can't reset hardware (-11) [ 76.488452] phy0: failed to restore operational channel after scan [ 76.488543] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.688125] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.889098] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 77.088122] wlan0: authentication with AP 00:1b:9e:d8:77:02 timed out [ 78.415786] ath5k phy0: noise floor calibration timeout (2417MHz) [ 78.810771] ath5k phy0: gain calibration timeout (2417MHz) [ 78.810782] phy0: failed to set freq to 2417 MHz for scan [ 79.427510] phy0: failed to set freq to 2422 MHz for scan [ 80.056900] __ratelimit: 3 callbacks suppressed [ 80.056910] ath5k phy0: gain calibration timeout (2427MHz) [ 80.056919] ath5k phy0: can't reset hardware (-11) [ 80.056925] phy0: failed to set freq to 2427 MHz for scan [ 80.670529] ath5k phy0: gain calibration timeout (2432MHz) [ 80.670540] ath5k phy0: can't reset hardware (-11) [ 80.670546] phy0: failed to set freq to 2432 MHz for scan [ 81.285272] ath5k phy0: gain calibration timeout (2437MHz) [ 81.285285] ath5k phy0: can't reset hardware (-11) [ 81.285294] phy0: failed to set freq to 2437 MHz for scan [ 81.911449] ath5k phy0: gain calibration timeout (2442MHz) [ 81.911461] ath5k phy0: can't reset hardware (-11) [ 81.911470] phy0: failed to set freq to 2442 MHz for scan [ 82.526023] ath5k phy0: gain calibration timeout (2447MHz) [ 82.526034] ath5k phy0: can't reset hardware (-11) [ 82.526040] phy0: failed to set freq to 2447 MHz for scan [ 83.141962] phy0: failed to set freq to 2452 MHz for scan [ 83.759025] phy0: failed to set freq to 2457 MHz for scan [ 84.373688] phy0: failed to set freq to 2462 MHz for scan [ 84.990322] phy0: failed to restore operational channel after scan [ 89.419876] __ratelimit: 8 callbacks suppressed [ 89.419890] ath5k phy0: noise floor calibration timeout (2412MHz) [ 90.087509] ath5k phy0: gain calibration timeout (2417MHz) [ 90.087519] ath5k phy0: can't reset hardware (-11) [ 90.087525] phy0: failed to set freq to 2417 MHz for scan [ 90.700892] ath5k phy0: gain calibration timeout (2422MHz) [ 90.700903] ath5k phy0: can't reset hardware (-11) [ 90.700909] phy0: failed to set freq to 2422 MHz for scan [ 91.315752] ath5k phy0: gain calibration timeout (2427MHz) [ 91.315763] ath5k phy0: can't reset hardware (-11) [ 91.315770] phy0: failed to set freq to 2427 MHz for scan [ 91.935144] ath5k phy0: gain calibration timeout (2432MHz) [ 91.935155] ath5k phy0: can't reset hardware (-11) [ 91.935161] phy0: failed to set freq to 2432 MHz for scan [ 92.550491] ath5k phy0: gain calibration timeout (2437MHz) [ 92.550505] phy0: failed to set freq to 2437 MHz for scan [ 93.220305] phy0: failed to set freq to 2442 MHz for scan [ 93.837228] phy0: failed to set freq to 2447 MHz for scan [ 94.450800] phy0: failed to set freq to 2452 MHz for scan [ 95.069019] phy0: failed to set freq to 2457 MHz for scan [ 95.690239] __ratelimit: 9 callbacks suppressed [ 95.690251] ath5k phy0: gain calibration timeout (2462MHz) [ 95.690261] ath5k phy0: can't reset hardware (-11) [ 95.690269] phy0: failed to set freq to 2462 MHz for scan [ 96.305163] ath5k phy0: gain calibration timeout (2412MHz) [ 96.305173] ath5k phy0: can't reset hardware (-11) [ 96.305179] phy0: failed to restore operational channel after scan [ 100.084643] ath5k phy0: noise floor calibration failed (2412MHz) [ 100.689317] ath5k phy0: gain calibration timeout (2417MHz) [ 100.689328] ath5k phy0: can't reset hardware (-11) [ 100.689334] phy0: failed to set freq to 2417 MHz for scan [ 101.308123] ath5k phy0: gain calibration timeout (2422MHz) [ 101.308134] ath5k phy0: can't reset hardware (-11) [ 101.308140] phy0: failed to set freq to 2422 MHz for scan [ 101.923409] ath5k phy0: gain calibration timeout (2427MHz) [ 101.923419] ath5k phy0: can't reset hardware (-11) [ 101.923425] phy0: failed to set freq to 2427 MHz for scan [ 102.536898] ath5k phy0: gain calibration timeout (2432MHz) [ 102.536911] ath5k phy0: can't reset hardware (-11) [ 102.536920] phy0: failed to set freq to 2432 MHz for scan [ 103.153227] ath5k phy0: gain calibration timeout (2437MHz) [ 103.153238] ath5k phy0: can't reset hardware (-11) [ 103.153244] phy0: failed to set freq to 2437 MHz for scan [ 103.766742] ath5k phy0: gain calibration timeout (2442MHz) [ 103.766753] ath5k phy0: can't reset hardware (-11) [ 103.766759] phy0: failed to set freq to 2442 MHz for scan [ 104.382792] phy0: failed to set freq to 2447 MHz for scan [ 104.998713] phy0: failed to set freq to 2452 MHz for scan [ 105.612695] phy0: failed to set freq to 2457 MHz for scan [ 106.227980] phy0: failed to set freq to 2462 MHz for scan [ 106.846579] __ratelimit: 8 callbacks suppressed [ 106.846591] ath5k phy0: gain calibration timeout (2412MHz) [ 106.846601] ath5k phy0: can't reset hardware (-11) [ 106.846609] phy0: failed to restore operational channel after scan [ 111.388603] ath5k phy0: noise floor calibration failed (2412MHz) [ 112.002756] ath5k phy0: gain calibration timeout (2417MHz) [ 112.002769] ath5k phy0: can't reset hardware (-11) [ 112.002776] phy0: failed to set freq to 2417 MHz for scan [ 112.618112] ath5k phy0: gain calibration timeout (2422MHz) [ 112.618123] ath5k phy0: can't reset hardware (-11) [ 112.618129] phy0: failed to set freq to 2422 MHz for scan [ 113.234943] ath5k phy0: gain calibration timeout (2427MHz) [ 113.234957] ath5k phy0: can't reset hardware (-11) [ 113.234965] phy0: failed to set freq to 2427 MHz for scan [ 113.855231] ath5k phy0: gain calibration timeout (2432MHz) [ 113.855242] ath5k phy0: can't reset hardware (-11) [ 113.855248] phy0: failed to set freq to 2432 MHz for scan
Quoted 3 lines
Happened on boot, and card stopped working.
Only a reboot helped.
A patch has been submitted which stops the card getting wedged this way,
<http://www.spinics.net/lists/linux-wireless/msg23404.html>
from the messages it's not clear whether this is a complete fix, or more of a workaround for an underlying problem. It sounds like it got an ACK from another tester (and I can add mine as well!), but no-one has accepted or reviewed it :(.
Quoted 15 lines
When transferring large amounts of data from/to desktop pc, assotiation with ap is dropped often which results is minute/two of no wireless activety and this:
[ 1522.872096] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 1 [ 1523.072094] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 2 [ 1523.268098] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 3 [ 1523.477204] wlan0: direct probe to AP 00:1b:9e:d8:77:02 timed out [ 1524.569452] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 1524.571157] wlan0: authenticated [ 1524.571179] wlan0: associate with AP 00:1b:9e:d8:77:02 [ 1524.574284] wlan0: RX ReassocResp from 00:1b:9e:d8:77:02 (capab=0x411 status=0 aid=1)
Quoted 4 lines
Also when downloading from AP (from desktop) I see this:
ath5k phy0: unsupported jumbo
Known issue, just what it says on the tin. There used to be a bug here, but it's fixed now. Just an unsupported performance feature which you should be able to live without, for the time being :).
(the bugfix thread is here, it confirms the intention to ignore jumbo frames <http://thread.gmane.org/gmane.linux.kernel.wireless.general/23383>).
Regards
Alan
Quoted 4 lines · Alan Jenkins
Quoted 2 lines · Maxim Levitsky
[noise calibration timeouts]
Only a reboot helped.
You can also do a suspend-to-ram cycle as well which effectively reboots the card.
Quoted 8 lines
A patch has been submitted which stops the card getting wedged this way,
<http://www.spinics.net/lists/linux-wireless/msg23404.html>
from the messages it's not clear whether this is a complete fix, or more of a workaround for an underlying problem. It sounds like it got an ACK from another tester (and I can add mine as well!), but no-one has accepted or reviewed it :(.
Actually this had been in wireless-testing for a bit and got sent on to net-next today. The problem also had plagued me for quite a while!
Signature · 1 line
Bob Copeland %% www.bobcopeland.com
Quoted 169 lines · Alan Jenkins
Quoted 132 lines · Maxim Levitsky
Hi,
I captured few errors in dmesg, will post them here. If I see more errors, I add them to this thread.
[ 69.516498] ath5k phy0: gain calibration timeout (2412MHz) [ 69.516509] ath5k phy0: can't reset hardware (-11) [ 69.516516] phy0: failed to restore operational channel after scan [ 69.628572] ath5k phy0: noise floor calibration failed (2412MHz) [ 69.686894] ath5k phy0: noise floor calibration failed (2417MHz) [ 69.770067] ath5k phy0: noise floor calibration failed (2417MHz) [ 70.419785] ath5k phy0: gain calibration timeout (2422MHz) [ 70.419800] ath5k phy0: can't reset hardware (-11) [ 70.419809] phy0: failed to set freq to 2422 MHz for scan [ 71.356436] ath5k phy0: gain calibration timeout (2427MHz) [ 71.356450] ath5k phy0: can't reset hardware (-11) [ 71.356458] phy0: failed to set freq to 2427 MHz for scan [ 72.119219] ath5k phy0: gain calibration timeout (2432MHz) [ 72.119234] phy0: failed to set freq to 2432 MHz for scan [ 72.764447] phy0: failed to set freq to 2437 MHz for scan [ 73.410438] phy0: failed to set freq to 2442 MHz for scan [ 74.027807] phy0: failed to set freq to 2447 MHz for scan [ 74.640495] __ratelimit: 7 callbacks suppressed [ 74.640504] ath5k phy0: gain calibration timeout (2452MHz) [ 74.640511] ath5k phy0: can't reset hardware (-11) [ 74.640517] phy0: failed to set freq to 2452 MHz for scan [ 75.256551] ath5k phy0: gain calibration timeout (2457MHz) [ 75.256565] ath5k phy0: can't reset hardware (-11) [ 75.256573] phy0: failed to set freq to 2457 MHz for scan [ 75.874414] ath5k phy0: gain calibration timeout (2462MHz) [ 75.874424] ath5k phy0: can't reset hardware (-11) [ 75.874430] phy0: failed to set freq to 2462 MHz for scan [ 76.488436] ath5k phy0: gain calibration timeout (2412MHz) [ 76.488447] ath5k phy0: can't reset hardware (-11) [ 76.488452] phy0: failed to restore operational channel after scan [ 76.488543] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.688125] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.889098] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 77.088122] wlan0: authentication with AP 00:1b:9e:d8:77:02 timed out [ 78.415786] ath5k phy0: noise floor calibration timeout (2417MHz) [ 78.810771] ath5k phy0: gain calibration timeout (2417MHz) [ 78.810782] phy0: failed to set freq to 2417 MHz for scan [ 79.427510] phy0: failed to set freq to 2422 MHz for scan [ 80.056900] __ratelimit: 3 callbacks suppressed [ 80.056910] ath5k phy0: gain calibration timeout (2427MHz) [ 80.056919] ath5k phy0: can't reset hardware (-11) [ 80.056925] phy0: failed to set freq to 2427 MHz for scan [ 80.670529] ath5k phy0: gain calibration timeout (2432MHz) [ 80.670540] ath5k phy0: can't reset hardware (-11) [ 80.670546] phy0: failed to set freq to 2432 MHz for scan [ 81.285272] ath5k phy0: gain calibration timeout (2437MHz) [ 81.285285] ath5k phy0: can't reset hardware (-11) [ 81.285294] phy0: failed to set freq to 2437 MHz for scan [ 81.911449] ath5k phy0: gain calibration timeout (2442MHz) [ 81.911461] ath5k phy0: can't reset hardware (-11) [ 81.911470] phy0: failed to set freq to 2442 MHz for scan [ 82.526023] ath5k phy0: gain calibration timeout (2447MHz) [ 82.526034] ath5k phy0: can't reset hardware (-11) [ 82.526040] phy0: failed to set freq to 2447 MHz for scan [ 83.141962] phy0: failed to set freq to 2452 MHz for scan [ 83.759025] phy0: failed to set freq to 2457 MHz for scan [ 84.373688] phy0: failed to set freq to 2462 MHz for scan [ 84.990322] phy0: failed to restore operational channel after scan [ 89.419876] __ratelimit: 8 callbacks suppressed [ 89.419890] ath5k phy0: noise floor calibration timeout (2412MHz) [ 90.087509] ath5k phy0: gain calibration timeout (2417MHz) [ 90.087519] ath5k phy0: can't reset hardware (-11) [ 90.087525] phy0: failed to set freq to 2417 MHz for scan [ 90.700892] ath5k phy0: gain calibration timeout (2422MHz) [ 90.700903] ath5k phy0: can't reset hardware (-11) [ 90.700909] phy0: failed to set freq to 2422 MHz for scan [ 91.315752] ath5k phy0: gain calibration timeout (2427MHz) [ 91.315763] ath5k phy0: can't reset hardware (-11) [ 91.315770] phy0: failed to set freq to 2427 MHz for scan [ 91.935144] ath5k phy0: gain calibration timeout (2432MHz) [ 91.935155] ath5k phy0: can't reset hardware (-11) [ 91.935161] phy0: failed to set freq to 2432 MHz for scan [ 92.550491] ath5k phy0: gain calibration timeout (2437MHz) [ 92.550505] phy0: failed to set freq to 2437 MHz for scan [ 93.220305] phy0: failed to set freq to 2442 MHz for scan [ 93.837228] phy0: failed to set freq to 2447 MHz for scan [ 94.450800] phy0: failed to set freq to 2452 MHz for scan [ 95.069019] phy0: failed to set freq to 2457 MHz for scan [ 95.690239] __ratelimit: 9 callbacks suppressed [ 95.690251] ath5k phy0: gain calibration timeout (2462MHz) [ 95.690261] ath5k phy0: can't reset hardware (-11) [ 95.690269] phy0: failed to set freq to 2462 MHz for scan [ 96.305163] ath5k phy0: gain calibration timeout (2412MHz) [ 96.305173] ath5k phy0: can't reset hardware (-11) [ 96.305179] phy0: failed to restore operational channel after scan [ 100.084643] ath5k phy0: noise floor calibration failed (2412MHz) [ 100.689317] ath5k phy0: gain calibration timeout (2417MHz) [ 100.689328] ath5k phy0: can't reset hardware (-11) [ 100.689334] phy0: failed to set freq to 2417 MHz for scan [ 101.308123] ath5k phy0: gain calibration timeout (2422MHz) [ 101.308134] ath5k phy0: can't reset hardware (-11) [ 101.308140] phy0: failed to set freq to 2422 MHz for scan [ 101.923409] ath5k phy0: gain calibration timeout (2427MHz) [ 101.923419] ath5k phy0: can't reset hardware (-11) [ 101.923425] phy0: failed to set freq to 2427 MHz for scan [ 102.536898] ath5k phy0: gain calibration timeout (2432MHz) [ 102.536911] ath5k phy0: can't reset hardware (-11) [ 102.536920] phy0: failed to set freq to 2432 MHz for scan [ 103.153227] ath5k phy0: gain calibration timeout (2437MHz) [ 103.153238] ath5k phy0: can't reset hardware (-11) [ 103.153244] phy0: failed to set freq to 2437 MHz for scan [ 103.766742] ath5k phy0: gain calibration timeout (2442MHz) [ 103.766753] ath5k phy0: can't reset hardware (-11) [ 103.766759] phy0: failed to set freq to 2442 MHz for scan [ 104.382792] phy0: failed to set freq to 2447 MHz for scan [ 104.998713] phy0: failed to set freq to 2452 MHz for scan [ 105.612695] phy0: failed to set freq to 2457 MHz for scan [ 106.227980] phy0: failed to set freq to 2462 MHz for scan [ 106.846579] __ratelimit: 8 callbacks suppressed [ 106.846591] ath5k phy0: gain calibration timeout (2412MHz) [ 106.846601] ath5k phy0: can't reset hardware (-11) [ 106.846609] phy0: failed to restore operational channel after scan [ 111.388603] ath5k phy0: noise floor calibration failed (2412MHz) [ 112.002756] ath5k phy0: gain calibration timeout (2417MHz) [ 112.002769] ath5k phy0: can't reset hardware (-11) [ 112.002776] phy0: failed to set freq to 2417 MHz for scan [ 112.618112] ath5k phy0: gain calibration timeout (2422MHz) [ 112.618123] ath5k phy0: can't reset hardware (-11) [ 112.618129] phy0: failed to set freq to 2422 MHz for scan [ 113.234943] ath5k phy0: gain calibration timeout (2427MHz) [ 113.234957] ath5k phy0: can't reset hardware (-11) [ 113.234965] phy0: failed to set freq to 2427 MHz for scan [ 113.855231] ath5k phy0: gain calibration timeout (2432MHz) [ 113.855242] ath5k phy0: can't reset hardware (-11) [ 113.855248] phy0: failed to set freq to 2432 MHz for scanQuoted 3 lines
Happened on boot, and card stopped working.
Only a reboot helped.A patch has been submitted which stops the card getting wedged this way,
<http://www.spinics.net/lists/linux-wireless/msg23404.html>
from the messages it's not clear whether this is a complete fix, or more of a workaround for an underlying problem. It sounds like it got an ACK from another tester (and I can add mine as well!), but no-one has accepted or reviewed it :(.
Quoted 14 lines
When transferring large amounts of data from/to desktop pc, assotiation with ap is dropped often which results is minute/two of no wireless activety and this:
[ 1522.872096] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 1 [ 1523.072094] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 2 [ 1523.268098] wlan0: direct probe to AP 00:1b:9e:d8:77:02 try 3 [ 1523.477204] wlan0: direct probe to AP 00:1b:9e:d8:77:02 timed out [ 1524.569452] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 1524.571157] wlan0: authenticated [ 1524.571179] wlan0: associate with AP 00:1b:9e:d8:77:02 [ 1524.574284] wlan0: RX ReassocResp from 00:1b:9e:d8:77:02 (capab=0x411 status=0 aid=1)Quoted 4 lines
Also when downloading from AP (from desktop) I see this:
ath5k phy0: unsupported jumbo
Known issue, just what it says on the tin. There used to be a bug here, but it's fixed now. Just an unsupported performance feature which you should be able to live without, for the time being :).
Quoted 5 lines
(the bugfix thread is here, it confirms the intention to ignore jumbo frames <http://thread.gmane.org/gmane.linux.kernel.wireless.general/23383>).
Regards
Alan
The problem is that I have this patch applied... This says something about gain calibration timeout.
Best regards,
Maxim Levitsky
Quoted 132 lines · Maxim Levitsky
Hi,
I captured few errors in dmesg, will post them here. If I see more errors, I add them to this thread.
[ 69.516498] ath5k phy0: gain calibration timeout (2412MHz) [ 69.516509] ath5k phy0: can't reset hardware (-11) [ 69.516516] phy0: failed to restore operational channel after scan [ 69.628572] ath5k phy0: noise floor calibration failed (2412MHz) [ 69.686894] ath5k phy0: noise floor calibration failed (2417MHz) [ 69.770067] ath5k phy0: noise floor calibration failed (2417MHz) [ 70.419785] ath5k phy0: gain calibration timeout (2422MHz) [ 70.419800] ath5k phy0: can't reset hardware (-11) [ 70.419809] phy0: failed to set freq to 2422 MHz for scan [ 71.356436] ath5k phy0: gain calibration timeout (2427MHz) [ 71.356450] ath5k phy0: can't reset hardware (-11) [ 71.356458] phy0: failed to set freq to 2427 MHz for scan [ 72.119219] ath5k phy0: gain calibration timeout (2432MHz) [ 72.119234] phy0: failed to set freq to 2432 MHz for scan [ 72.764447] phy0: failed to set freq to 2437 MHz for scan [ 73.410438] phy0: failed to set freq to 2442 MHz for scan [ 74.027807] phy0: failed to set freq to 2447 MHz for scan [ 74.640495] __ratelimit: 7 callbacks suppressed [ 74.640504] ath5k phy0: gain calibration timeout (2452MHz) [ 74.640511] ath5k phy0: can't reset hardware (-11) [ 74.640517] phy0: failed to set freq to 2452 MHz for scan [ 75.256551] ath5k phy0: gain calibration timeout (2457MHz) [ 75.256565] ath5k phy0: can't reset hardware (-11) [ 75.256573] phy0: failed to set freq to 2457 MHz for scan [ 75.874414] ath5k phy0: gain calibration timeout (2462MHz) [ 75.874424] ath5k phy0: can't reset hardware (-11) [ 75.874430] phy0: failed to set freq to 2462 MHz for scan [ 76.488436] ath5k phy0: gain calibration timeout (2412MHz) [ 76.488447] ath5k phy0: can't reset hardware (-11) [ 76.488452] phy0: failed to restore operational channel after scan [ 76.488543] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.688125] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 76.889098] wlan0: authenticate with AP 00:1b:9e:d8:77:02 [ 77.088122] wlan0: authentication with AP 00:1b:9e:d8:77:02 timed out [ 78.415786] ath5k phy0: noise floor calibration timeout (2417MHz) [ 78.810771] ath5k phy0: gain calibration timeout (2417MHz) [ 78.810782] phy0: failed to set freq to 2417 MHz for scan [ 79.427510] phy0: failed to set freq to 2422 MHz for scan [ 80.056900] __ratelimit: 3 callbacks suppressed [ 80.056910] ath5k phy0: gain calibration timeout (2427MHz) [ 80.056919] ath5k phy0: can't reset hardware (-11) [ 80.056925] phy0: failed to set freq to 2427 MHz for scan [ 80.670529] ath5k phy0: gain calibration timeout (2432MHz) [ 80.670540] ath5k phy0: can't reset hardware (-11) [ 80.670546] phy0: failed to set freq to 2432 MHz for scan [ 81.285272] ath5k phy0: gain calibration timeout (2437MHz) [ 81.285285] ath5k phy0: can't reset hardware (-11) [ 81.285294] phy0: failed to set freq to 2437 MHz for scan [ 81.911449] ath5k phy0: gain calibration timeout (2442MHz) [ 81.911461] ath5k phy0: can't reset hardware (-11) [ 81.911470] phy0: failed to set freq to 2442 MHz for scan [ 82.526023] ath5k phy0: gain calibration timeout (2447MHz) [ 82.526034] ath5k phy0: can't reset hardware (-11) [ 82.526040] phy0: failed to set freq to 2447 MHz for scan [ 83.141962] phy0: failed to set freq to 2452 MHz for scan [ 83.759025] phy0: failed to set freq to 2457 MHz for scan [ 84.373688] phy0: failed to set freq to 2462 MHz for scan [ 84.990322] phy0: failed to restore operational channel after scan [ 89.419876] __ratelimit: 8 callbacks suppressed [ 89.419890] ath5k phy0: noise floor calibration timeout (2412MHz) [ 90.087509] ath5k phy0: gain calibration timeout (2417MHz) [ 90.087519] ath5k phy0: can't reset hardware (-11) [ 90.087525] phy0: failed to set freq to 2417 MHz for scan [ 90.700892] ath5k phy0: gain calibration timeout (2422MHz) [ 90.700903] ath5k phy0: can't reset hardware (-11) [ 90.700909] phy0: failed to set freq to 2422 MHz for scan [ 91.315752] ath5k phy0: gain calibration timeout (2427MHz) [ 91.315763] ath5k phy0: can't reset hardware (-11) [ 91.315770] phy0: failed to set freq to 2427 MHz for scan [ 91.935144] ath5k phy0: gain calibration timeout (2432MHz) [ 91.935155] ath5k phy0: can't reset hardware (-11) [ 91.935161] phy0: failed to set freq to 2432 MHz for scan [ 92.550491] ath5k phy0: gain calibration timeout (2437MHz) [ 92.550505] phy0: failed to set freq to 2437 MHz for scan [ 93.220305] phy0: failed to set freq to 2442 MHz for scan [ 93.837228] phy0: failed to set freq to 2447 MHz for scan [ 94.450800] phy0: failed to set freq to 2452 MHz for scan [ 95.069019] phy0: failed to set freq to 2457 MHz for scan [ 95.690239] __ratelimit: 9 callbacks suppressed [ 95.690251] ath5k phy0: gain calibration timeout (2462MHz) [ 95.690261] ath5k phy0: can't reset hardware (-11) [ 95.690269] phy0: failed to set freq to 2462 MHz for scan [ 96.305163] ath5k phy0: gain calibration timeout (2412MHz) [ 96.305173] ath5k phy0: can't reset hardware (-11) [ 96.305179] phy0: failed to restore operational channel after scan [ 100.084643] ath5k phy0: noise floor calibration failed (2412MHz) [ 100.689317] ath5k phy0: gain calibration timeout (2417MHz) [ 100.689328] ath5k phy0: can't reset hardware (-11) [ 100.689334] phy0: failed to set freq to 2417 MHz for scan [ 101.308123] ath5k phy0: gain calibration timeout (2422MHz) [ 101.308134] ath5k phy0: can't reset hardware (-11) [ 101.308140] phy0: failed to set freq to 2422 MHz for scan [ 101.923409] ath5k phy0: gain calibration timeout (2427MHz) [ 101.923419] ath5k phy0: can't reset hardware (-11) [ 101.923425] phy0: failed to set freq to 2427 MHz for scan [ 102.536898] ath5k phy0: gain calibration timeout (2432MHz) [ 102.536911] ath5k phy0: can't reset hardware (-11) [ 102.536920] phy0: failed to set freq to 2432 MHz for scan [ 103.153227] ath5k phy0: gain calibration timeout (2437MHz) [ 103.153238] ath5k phy0: can't reset hardware (-11) [ 103.153244] phy0: failed to set freq to 2437 MHz for scan [ 103.766742] ath5k phy0: gain calibration timeout (2442MHz) [ 103.766753] ath5k phy0: can't reset hardware (-11) [ 103.766759] phy0: failed to set freq to 2442 MHz for scan [ 104.382792] phy0: failed to set freq to 2447 MHz for scan [ 104.998713] phy0: failed to set freq to 2452 MHz for scan [ 105.612695] phy0: failed to set freq to 2457 MHz for scan [ 106.227980] phy0: failed to set freq to 2462 MHz for scan [ 106.846579] __ratelimit: 8 callbacks suppressed [ 106.846591] ath5k phy0: gain calibration timeout (2412MHz) [ 106.846601] ath5k phy0: can't reset hardware (-11) [ 106.846609] phy0: failed to restore operational channel after scan [ 111.388603] ath5k phy0: noise floor calibration failed (2412MHz) [ 112.002756] ath5k phy0: gain calibration timeout (2417MHz) [ 112.002769] ath5k phy0: can't reset hardware (-11) [ 112.002776] phy0: failed to set freq to 2417 MHz for scan [ 112.618112] ath5k phy0: gain calibration timeout (2422MHz) [ 112.618123] ath5k phy0: can't reset hardware (-11) [ 112.618129] phy0: failed to set freq to 2422 MHz for scan [ 113.234943] ath5k phy0: gain calibration timeout (2427MHz) [ 113.234957] ath5k phy0: can't reset hardware (-11) [ 113.234965] phy0: failed to set freq to 2427 MHz for scan [ 113.855231] ath5k phy0: gain calibration timeout (2432MHz) [ 113.855242] ath5k phy0: can't reset hardware (-11) [ 113.855248] phy0: failed to set freq to 2432 MHz for scan
Quoted 2 lines
Happened on boot, and card stopped working.
Only a reboot helped.
I still see that error.
It sometimes happen on resume from ram.
It is NOT noise calibration, but a gain calibration timeout Only fix is to reboot the system, as module reload doesn't help.
Best regards,
Maxim Levitsky
Quoted 4 lines · Maxim Levitsky
It sometimes happen on resume from ram.
It is NOT noise calibration, but a gain calibration timeout Only fix is to reboot the system, as module reload doesn't help.
I really think it is various sides of the same coin with multiple manifestations. There are bugzilla bugs now:
http://bugzilla.kernel.org/show_bug.cgi?id=12080
http://bugzilla.kernel.org/show_bug.cgi?id=12068
Signature · 1 line
Bob Copeland %% www.bobcopeland.com
Quoted 12 lines · Bob Copeland
Quoted 4 lines · Maxim Levitsky
It sometimes happen on resume from ram.
It is NOT noise calibration, but a gain calibration timeout Only fix is to reboot the system, as module reload doesn't help.
I really think it is various sides of the same coin with multiple manifestations. There are bugzilla bugs now:
http://bugzilla.kernel.org/show_bug.cgi?id=12080
http://bugzilla.kernel.org/show_bug.cgi?id=12068
Thanks,
I will install latest wireless-testing, enable debug, and try to catch this, here it seems to happen after suspend to ram. (Sometimes, about 1 in 20 times, maybe more)
Best regards,
Maxim Levitsky