Willie, WJ3G
--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Have you tried kissparms? From my rc.ax25 .....

echo -n "Setting KISS parameters for aprs"
/usr/local/sbin/kissparms -p aprs -r 32 -t 200 -s 20 -f n -l 20

-p port name from axports

-r  persistance
-t  txd
-s  slottime
-f  duplex/not duplex (y/n)
-l  tx tail (deprecated but useful(essential) on 0k3 HF)

To fix other port parameters (maxframe, paclen, etc) change the entries in /proc/sys/net/ax25/<port> and have that entry restored on boot from rc.ax25. This may not be important for you but it is here where I run max 1 and paclen 64 on 0k3 HF.

Ray vk2tv

A message that is not in the archive (sent off-list or not yet received): [email protected]

Willie Hein WJ3G

author

2008-11-28 20:37 UTC #4 lore raw

Thank you Neville and Tom,

That is exactly what I was looking for. I tend to believe that KISS over rides the firmware set commands. But things are working better now. Now to figure out why netrom won't work.

73, Willie

Quoted 26 lines · Neville A. Cross

Quoted 10 lines · On Fri, Nov 28, 2008 at 11:15 AM, Willie Hein WJ3G <[email protected]> wrote:
Greetings all,
Since i don't see it as an option in axctl or axparms, how do I set the txdelay using linux ax25?
tia
Willie, WJ3G
You have to use teh following command:
kissparms -p 1 -t 300 -r 128 -s 100 -l 30
where -t is the txdelay
in fedora I use it like:
/usr/sbin/kissparms -p 1 -t 300 -r 128 -s 100 -l 30
because of the different path that are use among distros
Hope it helps