Skip to contentSkip to conversation

Input: xpad - add PXN V900 support

PATCH New Matthias Berndt 1 participant 1 message Oct 13, 2023

Subsystems (2)
HID Input drivers
lore
Share & tools
lore

Matthias Berndt

author
#0 lore raw

PATCH v2 1/1 Input: xpad - add PXN V900 support

Hey,

I'd like to submit again my patch to enable support for the PXN V900 steering wheel in the xpad driver. It now contains the necessary Signed-off-by line – thank you Dmitry for pointing that out.

All the best,
Matthias

From 79080b54a269071eeb9896ade7bb609c1b88c527 Mon Sep 17 00:00:00 2001
From: Matthias Berndt <[email protected]>
Date: Mon, 25 Sep 2023 17:54:13 +0200
Subject: [PATCH] Input: xpad - add PXN V900 support

Add VID and PID to the xpad_device table to allow driver to use the PXN V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by Matthias Berndt <[email protected]>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/input/joystick/xpad.c +2 -0
index ede380551e55..478bf657efc2 100644
@@ -272,6 +272,7 @@ static const struct xpad_device {
 	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
+	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
 	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },

@@ -503,6 +504,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
 	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x11ff),		/* PXN V900 */
 	{ }
 };

--
2.41.0