Skip to contentSkip to conversation

sh: sh7763rdp: Update sh7763rdp config

PATCH New Nobuhiro Iwamatsu 2 participants 3 messages Nov 21, 2008 – Dec 4, 2008

lore
Share & tools
lore

Nobuhiro Iwamatsu

author
#0 lore raw

PATCH 1/1 sh: sh7763rdp: Update sh7763rdp config

Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 include/configs/sh7763rdp.h |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)
include/configs/sh7763rdp.h +1 -0
index 8a76dad..4ea79cf 100644
@@ -118,6 +118,7 @@
 #define CONFIG_SYS_HZ				(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* Ether */
+#define CONFIG_NET_MULTI 1
 #define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (1)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x01)
Signature · 1 line
1.5.6.5
#1 lore raw

PATCH 1/1 sh: sh7763rdp: Update sh7763rdp config

Hi Nobuhiro,

Quoted 13 lines · Nobuhiro Iwamatsu

Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 include/configs/sh7763rdp.h |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)
include/configs/sh7763rdp.h +0 -0
index 8a76dad..4ea79cf 100644

include/configs/sh7763rdp.h line 124

Quoted 7 lines
include/configs/sh7763rdp.h +1 -0
@@ -118,6 +118,7 @@
 #define CONFIG_SYS_HZ				(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* Ether */
+#define CONFIG_NET_MULTI 1
 #define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (1)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x01)

I added this to net/next, although it's not strictly a network patch. I figured that it really needs to stick with the other patch that you sent changing the API for your SH ethernet controller. Hopefully that's OK.

regards,
Ben

author
#2 lore raw

PATCH 1/1 sh: sh7763rdp: Update sh7763rdp config

Hi, Ben.

Quoted 19 lines · Ben Warren

Hi Nobuhiro,

Quoted 16 lines · Nobuhiro Iwamatsu

Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 include/configs/sh7763rdp.h |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)
include/configs/sh7763rdp.h +0 -0
index 8a76dad..4ea79cf 100644
@@ -118,6 +118,7 @@
 #define CONFIG_SYS_HZ                (CONFIG_SYS_CLK_FREQ / 
 TMU_CLK_DIVIDER)
Quoted 9 lines
Quoted 6 lines
include/configs/sh7763rdp.h +1 -0
 /* Ether */
+#define CONFIG_NET_MULTI 1
 #define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (1)

#define CONFIG_SH_ETHER_PHY_ADDR (0x01)

I added this to net/next, although it's not strictly a network patch. I figured that it really needs to stick with the other patch that you sent changing the API for your SH ethernet controller. Hopefully that's OK.

Thank you!

Best regards,
Nobuhiro