sony-ericsson W800 cellular doesn't work as an usb mass storage device

Please CC any replies; not subscribed to list

I can't mount my sony-ericsson W800 cellular as an usb mass storage device (it doesn't show up as an device). I run slackware-current (slackware 12.2 rc1)
Using kernel 2.6.27.7
It doesn't even show up when i run 'fdisk -l'

How ever running slackware 12.1 using kernel 2.6.24.5 works (used my other box for 12.1 testing) I also tried the 12.1 kernel 2.6.24.5 in slackware 12.2 rc1 and then it works. So it's seems kernel related. (but i'm not experienced enuff to know)

Kernel config 2.6.27.7 http://pastebin.com/m4ba5debe
Kernel config 2.6.24.5 http://pastebin.com/m20a78c4f
dmesg when pluging in the device on 2.6.27.7 http://pastebin.com/m56d5e2e8
dmesg when pluging in the device on 2.6.24.5 running 12.1 http://pastebin.com/m65e4fd04
dmesg when pluging in the device on 2.6.24.5 running current http://pastebin.com/m2ac79d09

My computer is an Compaq Presario 2800
Phone Sony Ericsson W800i 0fce:d028
What other information would be useful?

I searched the mailing list and found http://lkml.org/lkml/2008/9/11/276 which seems releated but there was no answer.

(please cc me on any reply)
Thanks,
Nille

Quoted 27 lines · Niklas "Nille" Åkerström

Please CC any replies; not subscribed to list

I can't mount my sony-ericsson W800 cellular as an usb mass storage device (it doesn't show up as an device).
I run slackware-current (slackware 12.2 rc1)
Using kernel 2.6.27.7
It doesn't even show up when i run 'fdisk -l'

How ever running slackware 12.1 using kernel 2.6.24.5 works (used my other box for 12.1 testing)
I also tried the 12.1 kernel 2.6.24.5 in slackware 12.2 rc1 and then it works.
So it's seems kernel related. (but i'm not experienced enuff to know)

Kernel config 2.6.27.7 http://pastebin.com/m4ba5debe
Kernel config 2.6.24.5 http://pastebin.com/m20a78c4f
dmesg when pluging in the device on 2.6.27.7
http://pastebin.com/m56d5e2e8 dmesg when pluging in the device on 2.6.24.5 running 12.1 http://pastebin.com/m65e4fd04
dmesg when pluging in the device on 2.6.24.5 running current
http://pastebin.com/m2ac79d09

My computer is an Compaq Presario 2800
Phone Sony Ericsson W800i 0fce:d028
What other information would be useful?

Quoted 3 lines

I searched the mailing list and found
http://lkml.org/lkml/2008/9/11/276 which seems releated but there was no answer.

What do you mean doesn't show up as a device? There doesn't seem to be anything unusual in the kernel log, you should have a /dev/sda1 device available (at least if udev, etc. are doing their job)..

Quoted 27 lines · On Thu, 04 Dec 2008 22:10:50 -0600 Robert Hancock <[email protected]> wrote:

Quoted 25 lines · Niklas "Nille" Åkerström

Please CC any replies; not subscribed to list

I can't mount my sony-ericsson W800 cellular as an usb mass storage device (it doesn't show up as an device). I run slackware-current (slackware 12.2 rc1)
Using kernel 2.6.27.7
It doesn't even show up when i run 'fdisk -l'

How ever running slackware 12.1 using kernel 2.6.24.5 works (used my other box for 12.1 testing)
I also tried the 12.1 kernel 2.6.24.5 in slackware 12.2 rc1 and then it works.
So it's seems kernel related. (but i'm not experienced enuff to know)

Kernel config 2.6.27.7 http://pastebin.com/m4ba5debe
Kernel config 2.6.24.5 http://pastebin.com/m20a78c4f
dmesg when pluging in the device on 2.6.27.7
http://pastebin.com/m56d5e2e8 dmesg when pluging in the device on
2.6.24.5 running 12.1 http://pastebin.com/m65e4fd04
dmesg when pluging in the device on 2.6.24.5 running current http://pastebin.com/m2ac79d09

My computer is an Compaq Presario 2800
Phone Sony Ericsson W800i 0fce:d028
What other information would be useful?

Quoted 9 lines

Quoted 4 lines

I searched the mailing list and found
http://lkml.org/lkml/2008/9/11/276 which seems releated but there was no answer.

What do you mean doesn't show up as a device? There doesn't seem to be anything unusual in the kernel log, you should have a /dev/sda1 device available (at least if udev, etc. are doing their job)..

Hrm...

Kay, is this perhaps related to any of the recent serial devices discussion on udev list? We've got udev-135 in 12.2rc1, but 12.1 shipped udev-118. Even so, report advises that this still works properly on the 12.1 kernel (2.6.24.5) even with udev-135.

-RW