Skip to contentSkip to conversation

2.6.27.7 built for Geode: Clock drift

PATCH Harald Dunkel 3 participants 10 messages Dec 2, 2008 – Dec 9, 2008

lore
Share & tools
lore
#0 lore raw

Hi folks,

If I build a kernel for AMD Geode, then I see a clock drift of appr. 30 min. to 1 hour per day. If I build the same kernel for i486, then the clock drift is gone. Running ntp makes no difference.

Hardware is a Linutop PC. /proc/cpuinfo says

processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 10
model name : Geode(TM) Integrated Processor by AMD PCS
stepping : 2
cpu MHz : 0.000
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de pse tsc msr cx8 sep pge cmov clflush mmx mmxext 3dnowext 3dnow
bogomips : 429.05
clflush size : 32
power management:

BTW, the CPU is running with 500 MHz (AFAIK). 0.000 MHz is surely not correct. /proc/cpuinfo reports the same for both kernels.

Attached is the diff of the config files. Please mail if you are interested in the complete config files, or if I can help to track this down.

Regards

Harri

config-2.6.27.7-geode renamed from config-2.6.27.7-486 +10 -7
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.27.7
-# Mon Dec  1 22:42:26 2008
+# Sun Nov 23 05:01:04 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -56,7 +56,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-486"
+CONFIG_LOCALVERSION="-geode"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -197,7 +197,7 @@
 # CONFIG_PARAVIRT_DEBUG is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
-CONFIG_M486=y
+# CONFIG_M486 is not set
 # CONFIG_M586 is not set
 # CONFIG_M586TSC is not set
 # CONFIG_M586MMX is not set
@@ -215,7 +215,7 @@
 # CONFIG_MWINCHIP2 is not set
 # CONFIG_MWINCHIP3D is not set
 # CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
+CONFIG_MGEODE_LX=y
 # CONFIG_MCYRIXIII is not set
 # CONFIG_MVIAC3_2 is not set
 # CONFIG_MVIAC7 is not set
@@ -227,15 +227,16 @@
 CONFIG_X86_CMPXCHG=y
 CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
-# CONFIG_X86_PPRO_FENCE is not set
-CONFIG_X86_F00F_BUG=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
 CONFIG_X86_POPAD_OK=y
-CONFIG_X86_ALIGNMENT_16=y
 CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_TSC=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
@@ -423,6 +424,7 @@
 # CONFIG_MCA_PROC_FS is not set
 CONFIG_SCx200=m
 CONFIG_SCx200HR_TIMER=m
+CONFIG_GEODE_MFGPT_TIMER=y
 # CONFIG_OLPC is not set
 CONFIG_K8_NB=y
 # CONFIG_PCCARD is not set
@@ -1919,6 +1921,7 @@
 CONFIG_ADVANTECH_WDT=m
 CONFIG_ALIM1535_WDT=m
 CONFIG_ALIM7101_WDT=m
+CONFIG_GEODE_WDT=m
 CONFIG_SC520_WDT=m
 CONFIG_EUROTECH_WDT=m
 CONFIG_IB700_WDT=m
#1 lore raw
Quoted 29 lines · Harald Dunkel

Hi folks,

If I build a kernel for AMD Geode, then I see a clock drift of appr. 30 min. to 1 hour per day. If I build the same kernel for i486, then the clock drift is gone. Running ntp makes no difference.

Hardware is a Linutop PC. /proc/cpuinfo says

processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 10
model name : Geode(TM) Integrated Processor by AMD PCS
stepping : 2
cpu MHz : 0.000
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de pse tsc msr cx8 sep pge cmov clflush mmx mmxext 3dnowext 3dnow
bogomips : 429.05
clflush size : 32
power management:

Quoted 2 lines

BTW, the CPU is running with 500 MHz (AFAIK). 0.000 MHz is surely not correct. /proc/cpuinfo reports the same for both kernels.

Hmm - we've heard reports of this before, but nothing came of it. I would be interested in a chance to debug it this time.

Please try turning off CONFIG_GEODE_MFGPT_TIMER=y and try again. Also, try something in the 2.6.28 family to rule out fixes in the timer subsystem.

Thanks,
Jordan

#2 lore raw

Hi Jordan,

Quoted 13 lines · Jordan Crouse

Hmm - we've heard reports of this before, but nothing came of it. I would be interested in a chance to debug it this time.

Please try turning off CONFIG_GEODE_MFGPT_TIMER=y and try again. Also, try something in the 2.6.28 family to rule out fixes in the timer subsystem.

Thanks,
Jordan

Signature · 4 lines
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 4 lines
Dipl.-Ing. Harald Dunkel     | "They that can give up liberty to obtain
Muehlenbachstr. 3            | a little temporary safety deserve neither
52134 Herzogenrath, Germany  | liberty nor safety."
+49 2407 565 105             |            Benjamin Franklin, 1706 - 1790
#3 lore raw
In reply to Jordan Crouse

Hi Jordan,

Sorry for the empty reply. I clicked on [Send] by accident.

Quoted 4 lines · Jordan Crouse

Hmm - we've heard reports of this before, but nothing came of it. I would be interested in a chance to debug it this time.

Please try turning off CONFIG_GEODE_MFGPT_TIMER=y and try again.

AFAICS this was already set.

Quoted 2 lines

Also, try something in the 2.6.28 family to rule out fixes in the timer subsystem.

The build is running, but it is a slow machine.

Regards

Harri

#4 lore raw
Quoted 11 lines · Harald Dunkel

Hi Jordan,

Sorry for the empty reply. I clicked on [Send] by accident.

Quoted 4 lines · Jordan Crouse

Hmm - we've heard reports of this before, but nothing came of it. I would be interested in a chance to debug it this time.

Please try turning off CONFIG_GEODE_MFGPT_TIMER=y and try again.

AFAICS this was already set.

You mean set prior to 2.6.27? I know, but if there is a regression, that would help narrow it down.

Jordan

#5 lore raw
In reply to Jordan Crouse
Quoted 2 lines · Jordan Crouse

Also, try something in the 2.6.28 family to rule out fixes in the timer subsystem.

Using 2.6.28-rc7 the problem seems to be gone. There was no complain about TSC in dmesg, and clock speed is OK. (ntp is off.)

Many thanx

Harri

#6 lore raw
In reply to Harald Dunkel
Quoted 5 lines · Harald Dunkel

Hi folks,

If I build a kernel for AMD Geode, then I see a clock drift of appr. 30 min. to 1 hour per day. If I build the same kernel for i486, then the clock drift is gone. Running ntp makes no difference.

For both configs, can you run:
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
and:
cat /sys/devices/system/clocksource/clocksource0/current_clocksource

Then send back the output?

thanks
-john

#7 lore raw
Quoted 8 lines · john stultz

For both configs, can you run:
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
and:
cat /sys/devices/system/clocksource/clocksource0/current_clocksource

Then send back the output?

Sure. For 486:

% cat /sys/devices/system/clocksource/clocksource0/available_clocksource pit jiffies
% cat /sys/devices/system/clocksource/clocksource0/current_clocksource pit

For Geode (clock is running too fast):
% cat /sys/devices/system/clocksource/clocksource0/available_clocksource jiffies
% cat /sys/devices/system/clocksource/clocksource0/current_clocksource jiffies

dmesg says for Geode:

:
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available Marking TSC unstable due to could not calculate TSC khz :

Regards

Harri

#8 lore raw
Quoted 25 lines · Harald Dunkel
Quoted 8 lines · john stultz

For both configs, can you run:
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
and:
cat /sys/devices/system/clocksource/clocksource0/current_clocksource

Then send back the output?

Sure. For 486:

% cat /sys/devices/system/clocksource/clocksource0/available_clocksource pit jiffies
% cat /sys/devices/system/clocksource/clocksource0/current_clocksource pit

For Geode (clock is running too fast):
% cat /sys/devices/system/clocksource/clocksource0/available_clocksource jiffies
% cat /sys/devices/system/clocksource/clocksource0/current_clocksource jiffies

Quoted 6 lines

dmesg says for Geode:

:
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available Marking TSC unstable due to could not calculate TSC khz

Could you send your .config?

It seems the PIT (which is used in 486 build) is being disabled in the Geode config. However, I thought the Geode's had their own clocksources, either the SCx200 or the GEODE_MFGPT_TIMER. Maybe one of those needs to be enabled?

thanks
-john

#9 lore raw
Quoted 31 lines · john stultz
Quoted 23 lines · Harald Dunkel
Quoted 7 lines · john stultz

For both configs, can you run:
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
and:
cat /sys/devices/system/clocksource/clocksource0/current_clocksource

Then send back the output?

Sure. For 486:

% cat /sys/devices/system/clocksource/clocksource0/available_clocksource pit jiffies
% cat /sys/devices/system/clocksource/clocksource0/current_clocksource pit

For Geode (clock is running too fast):
% cat /sys/devices/system/clocksource/clocksource0/available_clocksource jiffies
% cat /sys/devices/system/clocksource/clocksource0/current_clocksource jiffies

Quoted 6 lines

dmesg says for Geode:

:
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available Marking TSC unstable due to could not calculate TSC khz

Quoted 6 lines

Could you send your .config?

It seems the PIT (which is used in 486 build) is being disabled in the Geode config. However, I thought the Geode's had their own clocksources, either the SCx200 or the GEODE_MFGPT_TIMER. Maybe one of those needs to be enabled?

He sent his original config in his first email - GEODE_MFGPT_TIMER was enabled. Its not always certain that there are MFGPT timers available (prior to about the middle of this year, most Geode BIOSes took all the timers for themselves). But in any case the system should fall back to PIT automatically, so regardless of more advanced timers. the absence of a PIT is troubling.

Jordan