Skip to contentSkip to conversation

XUPV2P + EDK 9.1 + Linux 2.4

DISCUSSION Juliana Su 3 participants 4 messages Dec 12, 2008 – Dec 15, 2008

lore
Share & tools
lore

Juliana Su

author
#0 lore raw

Hi,

I'm relatively new to the XUPV2P. Up until about a month ago, I had been working with an ML310. Anyway, I noticed the “XUPV2P update to kernel 2.6 fails” thread and saw that quite a few people have been successful with the XUPV2P; I was hoping that those of you who have been successful with the XUPV2P could help me out.

First some background...

I am using EDK 9.1, EDK 10.1, the MontaVista Linux 2.4 kernel (linuxppc_2_4_devel), and a 256 MB DDR DIMM. I was able to get a basic system (XPS UART16550, DDR SDRAM - MPMC, XPS SYSACE, Linux 2.4) made in EDK 10.1 to work. However, I have not had any success getting a similar system (UART16550, DDR_SDRAM_32Mx64 - PLB DDR, OPB SYSACE, Linux 2.4) built in EDK 9.1 to work. The issue is that, when I turn on the board, nothing shows up in minicom. I checked the contents of the log_buf; it was filled with junk.

My goal is a system with SysACE support, Ethernet, and the AC-97 audio CODEC that can mount a hard drive. It seems like it would be easier to create this system using EDK 9.1 than EDK 10.1. Right now, though, just getting a basic system to work using EDK 9.1 would be great.

For those of you who have been successful with the XUPV2P, what configurations in the EDK 9.1 Base System Builder Wizard and what Linux kernel worked for you? Any suggestions as to why I might not be getting any output? Would it be possible for me to use Linux 2.6 or should I stick with Linux 2.4? (I feel like Linux 2.4 would be better, but I thought I would ask anyway.) Also, are there any known issues with EDK 9.1 and the XUPV2P? I vaguely remember reading about memory issues somewhere, but I can’t remember if they were related to EDK 9.1, EDK 10.1, or both.

Let me know if I should provide any additional information. Thanks!

-Juliana

#1 lore raw

I have linux 2.6 running on the xupv2p with uart and ethernet. Also, I have linux 2.6 running with uart, sysace and ethernet.=20 You can find here: https://rm-rfroot.net/xupv2p/ useful instructions to por= t
linux 2.4 to the xupv2p board.

Quoted 4 lines · Juliana Su

=20
Hi,
=20
I'm relatively new to the XUPV2P. Up until about a month ago, I had been=

=20

Quoted 1 line

working with an ML310. Anyway, I noticed the =E2=80=9CXUPV2P update to ke=

rnel=20

Quoted 1 line

2.6 fails=E2=80=9D thread and saw that quite a few people have been succe=

ssful=20

Quoted 1 line

with the XUPV2P; I was hoping that those of you who have been successful=

=20

Quoted 7 lines

with the XUPV2P could help me out.
=20
First some background...
=20
I am using EDK 9.1, EDK 10.1, the MontaVista Linux 2.4 kernel=20 (linuxppc_2_4_devel), and a 256 MB DDR DIMM. I was able to get a basic=20 system (XPS UART16550, DDR SDRAM - MPMC, XPS SYSACE, Linux 2.4) made in=

=20

Quoted 1 line

EDK 10.1 to work. However, I have not had any success getting a similar=

=20

Quoted 8 lines

system (UART16550, DDR_SDRAM_32Mx64 - PLB DDR, OPB SYSACE, Linux 2.4)=20 built in EDK 9.1 to work. The issue is that, when I turn on the board,=20 nothing shows up in minicom. I checked the contents of the log_buf; it=20 was filled with junk.
=20
My goal is a system with SysACE support, Ethernet, and the AC-97 audio=20 CODEC that can mount a hard drive. It seems like it would be easier to=20 create this system using EDK 9.1 than EDK 10.1. Right now, though, just=

=20

Quoted 4 lines

getting a basic system to work using EDK 9.1 would be great. =20
For those of you who have been successful with the XUPV2P, what=20 configurations in the EDK 9.1 Base System Builder Wizard and what Linux=

=20

Quoted 1 line

kernel worked for you? Any suggestions as to why I might not be getting=

=20

Quoted 5 lines

any output? Would it be possible for me to use Linux 2.6 or should I=20 stick with Linux 2.4? (I feel like Linux 2.4 would be better, but I=20 thought I would ask anyway.) Also, are there any known issues with EDK=20 9.1 and the XUPV2P? I vaguely remember reading about memory issues=20 somewhere, but I can=E2=80=99t remember if they were related to EDK 9.1, =

EDK=20

Quoted 5 lines

10.1, or both.
=20
Let me know if I should provide any additional information. Thanks! =20
=20

Quoted 8 lines

-Juliana
=20
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
=20

--=20
View this message in context: http://www.nabble.com/XUPV2P-%2B-EDK-9.1-%2B-=
Linux-2.4-tp20969433p20976787.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.

author
#2 lore raw

I am familiar with that site. It is very useful; I have actually referred to it many times when trying to port Linux 2.4 to the XUPV2P. No luck, though.

-Juliana

------------------------------

Message: 4
Date: Fri, 12 Dec 2008 06:39:01 -0800 (PST)
From: "sarah.ddff" <[email protected]>
Subject: Re: XUPV2P + EDK 9.1 + Linux 2.4
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8

I have linux 2.6 running on the xupv2p with uart and ethernet. Also, I have linux 2.6 running with uart, sysace and ethernet. You can find here: https://rm-rfroot.net/xupv2p/ useful instructions to port linux 2.4 to the xupv2p board.

#3 lore raw

I have linux 2.4 working fine on the xupv2p.
You can send the problems you faced while installing linux 2.4 on the xupv2p.
Maybe, I can help you

Quoted 31 lines · Juliana Su

I am familiar with that site. It is very useful; I have actually referred to it many times when trying to port Linux 2.4 to the XUPV2P. No luck, though.

-Juliana

------------------------------

Message: 4
Date: Fri, 12 Dec 2008 06:39:01 -0800 (PST)
From: "sarah.ddff" <[email protected]>
Subject: Re: XUPV2P + EDK 9.1 + Linux 2.4
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8

I have linux 2.6 running on the xupv2p with uart and ethernet. Also, I have linux 2.6 running with uart, sysace and ethernet. You can find here:
https://rm-rfroot.net/xupv2p/ useful instructions to port linux 2.4 to the xupv2p board.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 2 lines
View this message in context: http://www.nabble.com/XUPV2P-%2B-EDK-9.1-%2B-Linux-2.4-tp20969433p21010399.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.