usb : musb : Add MUSB contorller driver and enable Davinci MSC support
cover usb : musb : Add MUSB contorller driver and enable Davinci MSC support
This patch series adds Mentor Graphics USB OTG host controller driver support and MSC support for DM6446 (TI DaVinci) platform.
- [PATCH 1/6] usb : musb : Add high speed field in usb_device structure.
- [PATCH 2/6] usb : musb : Adding host controller driver for Mentor USB controller.
- [PATCH 3/6] usb : musb : Adding USB VBUS enable functionality for DM6446 DVEVM.
- [PATCH 4/6] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support.
- [PATCH 5/6] usb : musb : Enabling DM6446 (TI DaVinci) USB module power.
- [PATCH 6/6] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform.
cover usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Thomas,
Quoted 2 lines · Thomas Abraham
This patch series adds Mentor Graphics USB OTG host controller driver support and MSC support for DM6446 (TI DaVinci) platform.
Any plans to support OMAP(3), too?
Best regards
Dirk
Subbrathnam
cover usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Dirk,
OMAP patches are ready and will be submitted today. Can we submit the OMAP patches in this list itself ?
I thought there is a different list acceptance of U-Boot OMAP patches.
Regards
swami
Quoted 21 lines
-----Original Message-----
From: Dirk Behme [mailto:dirk.behme at googlemail.com]
Sent: Tuesday, December 16, 2008 6:23 PM
To: Abraham, Thomas
Cc: u-boot at lists.denx.de; Gupta, Ajay Kumar; Subbrathnam, Swaminathan; B, Ravi
Subject: Re: [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC supportThomas,
Quoted 2 lines · Thomas Abraham
This patch series adds Mentor Graphics USB OTG host controller driver support and MSC support for DM6446 (TI DaVinci) platform.
Any plans to support OMAP(3), too?
Best regards
Dirk
cover usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Quoted 2 lines · Swaminathan
Dirk,
OMAP patches are ready and will be submitted today. Can we submit the OMAP patches in this list itself ?
Yes, u-boot at lists.denx.de is the correct list for U-Boot OMAP(3) MUSB patches.
Quoted 1 line
I thought there is a different list acceptance of U-Boot OMAP patches.
We did coordination of OMAP3 clean up at some other lists/IRC. But now that the recent OMAP3 patches are at this list for review, this list is the right one for OMAP3 MUSB, too.
As OMAP3 patches are not in mainline, yet, I propose to do/test OMAP3 U-Boot MUSB patches against OMAP3 v6 patch series
http://lists.denx.de/pipermail/u-boot/2008-December/044787.html
available by git from
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=u-boot-omap3.git;a=shortlog;h=refs/heads/omap3-dev
Many thanks for your work!
Dirk
Quoted 25 lines
Quoted 22 lines
-----Original Message-----
From: Dirk Behme [mailto:dirk.behme at googlemail.com]
Sent: Tuesday, December 16, 2008 6:23 PM
To: Abraham, Thomas
Cc: u-boot at lists.denx.de; Gupta, Ajay Kumar; Subbrathnam, Swaminathan; B, Ravi
Subject: Re: [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC supportThomas,
Quoted 2 lines · Thomas Abraham
This patch series adds Mentor Graphics USB OTG host controller driver support and MSC support for DM6446 (TI DaVinci) platform.
Any plans to support OMAP(3), too?
Best regards
Dirk