Skip to contentSkip to conversation

vcan: whitepace fixes

PATCH Applied Oliver Hartkopp 2 participants 2 messages Dec 17, 2008

Subsystems (3)
Networking Network drivers CAN network drivers
lore
Share & tools
lore

Oliver Hartkopp

author
#0 lore raw

PATCH 1/1 vcan: whitepace fixes

vcan: whitespace fixes

Signed-off-by Oliver Hartkopp <[email protected]>

---

Hello Dave,

when adding the net_device_ops support to the vcan driver i discovered several whitepace issues in the driver setup section. This patch fixes them.

Thanks,
Oliver

drivers/net/can/vcan.c +10 -10
index f127ec9..a10c1d7 100644
@@ -134,24 +134,24 @@ static const struct net_device_ops vcan_netdev_ops = {
 
 static void vcan_setup(struct net_device *dev)
 {
-	dev->type              = ARPHRD_CAN;
-	dev->mtu               = sizeof(struct can_frame);
-	dev->hard_header_len   = 0;
-	dev->addr_len          = 0;
-	dev->tx_queue_len      = 0;
-	dev->flags             = IFF_NOARP;
+	dev->type		= ARPHRD_CAN;
+	dev->mtu		= sizeof(struct can_frame);
+	dev->hard_header_len	= 0;
+	dev->addr_len		= 0;
+	dev->tx_queue_len	= 0;
+	dev->flags		= IFF_NOARP;
 
 	/* set flags according to driver capabilities */
 	if (echo)
 		dev->flags |= IFF_ECHO;
 
-	dev->netdev_ops        = &vcan_netdev_ops;
-	dev->destructor        = free_netdev;
+	dev->netdev_ops		= &vcan_netdev_ops;
+	dev->destructor		= free_netdev;
 }
 
 static struct rtnl_link_ops vcan_link_ops __read_mostly = {
-       .kind           = "vcan",
-       .setup          = vcan_setup,
+	.kind	= "vcan",
+	.setup	= vcan_setup,
 };
 
 static __init int vcan_init_module(void)