Skip to contentSkip to conversation

U-Boot on Xilinx ML510

U-Boot Felix Radensky 2 participants 4 messages Dec 23, 2008 – Dec 24, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I was wandering whether latest u-boot supports ML510 board. I know that ML507 is supported in u-boot, and I know that Linux supports ML510, but I didn't find anything about u-boot on ML510.

Thanks a lot.

Felix.

#1 lore raw

Hi Felix,

Quoted 10 lines

Hi,

I was wandering whether latest u-boot supports ML510 board. I know that ML507 is supported in u-boot, and I know that Linux supports ML510, but I didn't find anything about u-boot on ML510.

Thanks a lot.

Felix.

there is generic-ppc440 support. I think it is easy to support ml510 board. Please look to board/xilinx/ml507/xparameters.h.

1. You can change this file manually
2. you can generate this file. (I am not sure which BSP generate this file but IMHO linux bsp do.)

Regards,
Michal

#2 lore raw

Hi, Michal

Quoted 12 lines · Michal Simek

Hi Felix
there is generic-ppc440 support. I think it is easy to support ml510 board.

Please look to board/xilinx/ml507/xparameters.h.

1. You can change this file manually
2. you can generate this file. (I am not sure which BSP generate this file but IMHO linux bsp do.)

Regards,
Michal

Thanks a lot for replying. Adding basic ml510 support seems easy indeed. I've
noticed that there's no Ethernet driver support. I guess if I need LL TEMAC in u-boot I have to use u-boot from Xilinx git tree. Is that correct ?

Felix.

#3 lore raw

Hi Felix,

Quoted 11 lines
Quoted 10 lines · Michal Simek

Hi Felix
there is generic-ppc440 support. I think it is easy to support ml510 board.
Please look to board/xilinx/ml507/xparameters.h.

1. You can change this file manually
2. you can generate this file. (I am not sure which BSP generate this file but
IMHO linux bsp do.)

Quoted 4 lines
Quoted 3 lines

Regards,
Michal

Thanks a lot for replying. Adding basic ml510 support seems easy indeed.

ok.

Quoted 3 lines

I've
noticed that there's no Ethernet driver support. I guess if I need LL TEMAC in u-boot I have to use u-boot from Xilinx git tree. Is that correct ?

You are right in xilinx tree is ll_temac driver but it is based on xilinx files.
We use one file ll_temac driver. I will send it to mailing list for reviewing
next year. This driver will have support for Microblaze CPU. PPC support is pretty easy (just set correct name) and check cache flushing. I haven't worked with ml510 and I don't have information which PHY is on it but currently this driver I use on s3e and ml505. Adding new phy should not be too hard.

Preliminary version is on my site www.monstr.eu. Just follow manual.

Regards,
Michal