k3b won't burn, nerolinux will

DISCUSSION Justin Piszcz 2 participants 2 messages Dec 29, 2008 5 messages not in the archive libata

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Justin Piszcz

author

2008-12-29 20:22 UTC #5 lore raw

Quoted 82 lines · Justin Piszcz

Quoted 78 lines · Paul Cartwright

Quoted 2 lines · you

Please install dvd+rw-tools as shown above (apt-get install it)

already installed:
~$ dpkg --list|grep dvd+rw
ii dvd+rw-tools 7.1-3
DVD+-RW/R tools

Quoted 4 lines

Then:
Burn a DVD using the command:
growisofs -Z /dev/hda=FC-6-i386-DVD.iso

how about:
growisofs -Z /dev/scd0 k3b.project.iso (existing file)

Quoted 7 lines

Or a CD:
cdrecord dev=/dev/scd0 -eject -v -dao driveropts=burnfree speed=48 -data file.iso
Then, please provide the output from that application/burn-run. I recommend you do this to isolate the problem.

# growisofs -Z /dev/scd0 K3b.project.iso
Executing 'genisoimage K3b.project.iso | builtin_dd of=/dev/scd0 obs=32k
seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
 0.52% done, estimate finish Mon Dec 29 12:20:31 2008
 1.05% done, estimate finish Mon Dec 29 12:20:31 2008
 1.57% done, estimate finish Mon Dec 29 12:20:31 2008
/dev/scd0: "Current Write Speed" is 16.4x1352KBps.
 2.09% done, estimate finish Mon Dec 29 12:37:15 2008
 2.61% done, estimate finish Mon Dec 29 12:34:32 2008
 3.14% done, estimate finish Mon Dec 29 12:32:44 2008
 3.66% done, estimate finish Mon Dec 29 12:31:26 2008
 4.18% done, estimate finish Mon Dec 29 12:30:52 2008
 4.70% done, estimate finish Mon Dec 29 12:30:04 2008
 5.23% done, estimate finish Mon Dec 29 12:29:26 2008
 5.75% done, estimate finish Mon Dec 29 12:28:55 2008
 6.27% done, estimate finish Mon Dec 29 12:28:29 2008
 6.80% done, estimate finish Mon Dec 29 12:28:07 2008
 7.32% done, estimate finish Mon Dec 29 12:27:48 2008
 7.84% done, estimate finish Mon Dec 29 12:27:31 2008
 8.36% done, estimate finish Mon Dec 29 12:27:17 2008
 8.89% done, estimate finish Mon Dec 29 12:27:04 2008
 9.41% done, estimate finish Mon Dec 29 12:26:53 2008
 9.93% done, estimate finish Mon Dec 29 12:26:43 2008
10.45% done, estimate finish Mon Dec 29 12:26:34 2008
10.98% done, estimate finish Mon Dec 29 12:26:26 2008
11.50% done, estimate finish Mon Dec 29 12:26:18 2008
12.02% done, estimate finish Mon Dec 29 12:26:12 2008
12.55% done, estimate finish Mon Dec 29 12:26:05 2008
13.07% done, estimate finish Mon Dec 29 12:26:00 2008
13.59% done, estimate finish Mon Dec 29 12:25:54 2008
14.11% done, estimate finish Mon Dec 29 12:25:49 2008
14.64% done, estimate finish Mon Dec 29 12:25:45 2008
15.16% done, estimate finish Mon Dec 29 12:25:41 2008
15.68% done, estimate finish Mon Dec 29 12:25:37 2008
16.20% done, estimate finish Mon Dec 29 12:25:33 2008
16.73% done, estimate finish Mon Dec 29 12:25:29 2008
17.25% done, estimate finish Mon Dec 29 12:25:26 2008
17.77% done, estimate finish Mon Dec 29 12:25:23 2008
18.29% done, estimate finish Mon Dec 29 12:25:20 2008
18.82% done, estimate finish Mon Dec 29 12:25:17 2008
19.34% done, estimate finish Mon Dec 29 12:25:15 2008
19.86% done, estimate finish Mon Dec 29 12:25:12 2008
20.39% done, estimate finish Mon Dec 29 12:25:10 2008
20.91% done, estimate finish Mon Dec 29 12:25:08 2008
21.43% done, estimate finish Mon Dec 29 12:25:06 2008
21.95% done, estimate finish Mon Dec 29 12:25:04 2008
22.48% done, estimate finish Mon Dec 29 12:25:02 2008
23.00% done, estimate finish Mon Dec 29 12:25:00 2008
23.52% done, estimate finish Mon Dec 29 12:24:58 2008
24.04% done, estimate finish Mon Dec 29 12:24:57 2008
24.57% done, estimate finish Mon Dec 29 12:24:55 2008
25.09% done, estimate finish Mon Dec 29 12:24:50 2008
25.61% done, estimate finish Mon Dec 29 12:24:48 2008

Quoted 9 lines

Quoted 8 lines
26.14% done, estimate finish Mon Dec 29 12:24:47 2008
26.66% done, estimate finish Mon Dec 29 12:24:46 2008
27.18% done, estimate finish Mon Dec 29 12:24:44 2008
:-[ WRITE@LBA=3c2d0h failed with SK=3h/ASC=80h/ACQ=04h]: Input/output error :-( write failed: Input/output error
/dev/scd0: flushing cache
/dev/scd0: updating RMA
/dev/scd0: closing session

CC'd linux-ide for ideas here.

Also, they may ask you to try a burn with speed=1 to eliminate any weird bottlenecks or bad media.

Justin.

Robert Hancock

2008-12-29 20:27 UTC #6 lore raw

Quoted 97 lines · Justin Piszcz

Quoted 83 lines · Justin Piszcz

Quoted 79 lines · Paul Cartwright

Quoted 2 lines · you

Please install dvd+rw-tools as shown above (apt-get install it)

already installed:
~$ dpkg --list|grep dvd+rw
ii dvd+rw-tools 7.1-3
DVD+-RW/R tools

Quoted 4 lines

Then:
Burn a DVD using the command:
growisofs -Z /dev/hda=FC-6-i386-DVD.iso

how about:
growisofs -Z /dev/scd0 k3b.project.iso (existing file)

Quoted 8 lines

Or a CD:
cdrecord dev=/dev/scd0 -eject -v -dao driveropts=burnfree speed=48 -data
file.iso
Then, please provide the output from that application/burn-run. I recommend you do this to isolate the problem.

# growisofs -Z /dev/scd0 K3b.project.iso
Executing 'genisoimage K3b.project.iso | builtin_dd of=/dev/scd0 obs=32k
seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
 0.52% done, estimate finish Mon Dec 29 12:20:31 2008
 1.05% done, estimate finish Mon Dec 29 12:20:31 2008
 1.57% done, estimate finish Mon Dec 29 12:20:31 2008
/dev/scd0: "Current Write Speed" is 16.4x1352KBps.
 2.09% done, estimate finish Mon Dec 29 12:37:15 2008
 2.61% done, estimate finish Mon Dec 29 12:34:32 2008
 3.14% done, estimate finish Mon Dec 29 12:32:44 2008
 3.66% done, estimate finish Mon Dec 29 12:31:26 2008
 4.18% done, estimate finish Mon Dec 29 12:30:52 2008
 4.70% done, estimate finish Mon Dec 29 12:30:04 2008
 5.23% done, estimate finish Mon Dec 29 12:29:26 2008
 5.75% done, estimate finish Mon Dec 29 12:28:55 2008
 6.27% done, estimate finish Mon Dec 29 12:28:29 2008
 6.80% done, estimate finish Mon Dec 29 12:28:07 2008
 7.32% done, estimate finish Mon Dec 29 12:27:48 2008
 7.84% done, estimate finish Mon Dec 29 12:27:31 2008
 8.36% done, estimate finish Mon Dec 29 12:27:17 2008
 8.89% done, estimate finish Mon Dec 29 12:27:04 2008
 9.41% done, estimate finish Mon Dec 29 12:26:53 2008
 9.93% done, estimate finish Mon Dec 29 12:26:43 2008
10.45% done, estimate finish Mon Dec 29 12:26:34 2008
10.98% done, estimate finish Mon Dec 29 12:26:26 2008
11.50% done, estimate finish Mon Dec 29 12:26:18 2008
12.02% done, estimate finish Mon Dec 29 12:26:12 2008
12.55% done, estimate finish Mon Dec 29 12:26:05 2008
13.07% done, estimate finish Mon Dec 29 12:26:00 2008
13.59% done, estimate finish Mon Dec 29 12:25:54 2008
14.11% done, estimate finish Mon Dec 29 12:25:49 2008
14.64% done, estimate finish Mon Dec 29 12:25:45 2008
15.16% done, estimate finish Mon Dec 29 12:25:41 2008
15.68% done, estimate finish Mon Dec 29 12:25:37 2008
16.20% done, estimate finish Mon Dec 29 12:25:33 2008
16.73% done, estimate finish Mon Dec 29 12:25:29 2008
17.25% done, estimate finish Mon Dec 29 12:25:26 2008
17.77% done, estimate finish Mon Dec 29 12:25:23 2008
18.29% done, estimate finish Mon Dec 29 12:25:20 2008
18.82% done, estimate finish Mon Dec 29 12:25:17 2008
19.34% done, estimate finish Mon Dec 29 12:25:15 2008
19.86% done, estimate finish Mon Dec 29 12:25:12 2008
20.39% done, estimate finish Mon Dec 29 12:25:10 2008
20.91% done, estimate finish Mon Dec 29 12:25:08 2008
21.43% done, estimate finish Mon Dec 29 12:25:06 2008
21.95% done, estimate finish Mon Dec 29 12:25:04 2008
22.48% done, estimate finish Mon Dec 29 12:25:02 2008
23.00% done, estimate finish Mon Dec 29 12:25:00 2008
23.52% done, estimate finish Mon Dec 29 12:24:58 2008
24.04% done, estimate finish Mon Dec 29 12:24:57 2008
24.57% done, estimate finish Mon Dec 29 12:24:55 2008
25.09% done, estimate finish Mon Dec 29 12:24:50 2008
25.61% done, estimate finish Mon Dec 29 12:24:48 2008

Quoted 9 lines

Quoted 8 lines
26.14% done, estimate finish Mon Dec 29 12:24:47 2008
26.66% done, estimate finish Mon Dec 29 12:24:46 2008
27.18% done, estimate finish Mon Dec 29 12:24:44 2008
:-[ WRITE@LBA=3c2d0h failed with SK=3h/ASC=80h/ACQ=04h]: Input/output error :-( write failed: Input/output error
/dev/scd0: flushing cache
/dev/scd0: updating RMA
/dev/scd0: closing session

Quoted 4 lines

CC'd linux-ide for ideas here.
Also, they may ask you to try a burn with speed=1 to eliminate any weird bottlenecks or bad media.

We don't have the full back story here.. The drive apparently returned an error code that's listed as vendor-specific in the MMC specs, so hard to say what it's trying to tell you.