Skip to contentSkip to conversation

snd-hda-intel no front mute switch

DISCUSSION Justin P. Mattock 2 participants 8 messages Dec 31, 2008 – Jan 3, 2009

lore
Share & tools
lore
#0 lore raw

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

regards;

Justin P. Mattock

#1 lore raw

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 6 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

#2 lore raw
Quoted 15 lines · Takashi Iwai

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 6 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

Quoted 9 lines

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

After adjusting my .config,
I am getting a speaker option to mute
the external speakers, as well as the headphones. the options that I added were:

SND_HRTIMER [=y]
SND_HDA_RECONFIG [=y]
SND_HDA_INPUT_BEEP [=y]

before adding these, like what I mentioned there was no "speaker" option(or "front"); As for the sound itself, I'll have to blast myself with some good tunes,
and see If I hear or experience any anomalies. (then wakeup the next day unable to hear); : )

regards;

Justin P. Mattock

#3 lore raw

At Thu, 01 Jan 2009 08:47:54 -0800,

Quoted 35 lines · Justin P. Mattock
Quoted 15 lines · Takashi Iwai

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 6 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

Quoted 9 lines

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

After adjusting my .config,
I am getting a speaker option to mute
the external speakers, as well as the headphones. the options that I added were:

SND_HRTIMER [=y]
SND_HDA_RECONFIG [=y]
SND_HDA_INPUT_BEEP [=y]

Quoted 7 lines

before adding these, like what I mentioned there was no "speaker" option(or "front"); As for the sound itself, I'll have to blast myself with some good tunes,
and see If I hear or experience any anomalies. (then wakeup the next day unable to hear); : )

Good to hear that it works now.
Could you check which config was broken exactly?
The config items above should be irrelevant with the (first) codec parsing, at least.

Takashi

#4 lore raw
Quoted 49 lines · Takashi Iwai

At Thu, 01 Jan 2009 08:47:54 -0800,

Quoted 37 lines · Justin P. Mattock
Quoted 16 lines · Takashi Iwai

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 7 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

Quoted 10 lines

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

After adjusting my .config,
I am getting a speaker option to mute
the external speakers, as well as the headphones. the options that I added were:

SND_HRTIMER [=y]
SND_HDA_RECONFIG [=y]
SND_HDA_INPUT_BEEP [=y]

Quoted 8 lines

before adding these, like what I mentioned there was no "speaker" option(or "front"); As for the sound itself, I'll have to blast myself with some good tunes,
and see If I hear or experience any anomalies. (then wakeup the next day unable to hear); : )

Quoted 9 lines

Good to hear that it works now.
Could you check which config was broken exactly?
The config items above should be irrelevant with the (first) codec parsing, at least.

Takashi

I can try and have a look, but if you're telling me that the above are irrelevant, then it must have been something else;
luckily I saved 2.6.28-rc9
So I can go ahead and load that kernel, and see, without adding any config options, what it looks like. (the problem is there might have been some more commits, that might have affected that since 4 days ago.); hence the change from "front" to "Speaker"
on the mixer itself. making this a lost cause. regards;

Justin P. Mattock

#5 lore raw
In reply to Takashi Iwai
Quoted 49 lines · Takashi Iwai

At Thu, 01 Jan 2009 08:47:54 -0800,

Quoted 37 lines · Justin P. Mattock
Quoted 16 lines · Takashi Iwai

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 7 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

Quoted 10 lines

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

After adjusting my .config,
I am getting a speaker option to mute
the external speakers, as well as the headphones. the options that I added were:

SND_HRTIMER [=y]
SND_HDA_RECONFIG [=y]
SND_HDA_INPUT_BEEP [=y]

Quoted 8 lines

before adding these, like what I mentioned there was no "speaker" option(or "front"); As for the sound itself, I'll have to blast myself with some good tunes,
and see If I hear or experience any anomalies. (then wakeup the next day unable to hear); : )

Quoted 9 lines

Good to hear that it works now.
Could you check which config was broken exactly?
The config items above should be irrelevant with the (first) codec parsing, at least.

Takashi

After thinking back with what I did,
I was using 2.6.28-rc9 then(if I recall);
did a git-pull monday morning.
In the git log I remember seeing this:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=cb10ea549fdc0ab2dd8988adab5bf40b4fa642f3
then after compiling and rebooting
I noticed the mixer had changed.(thus seeing the no button for "front"). then after a few hours I reverted back to 2.6.28-rc9.
waited a few days and did a git-pull Wednesday morning,changed my .config (after sending the original post);
then noticed that the "front" had changed to "speaker" on the mixer itself. (telling myself "man I must be seeing things");

As for the .config options you're right, it doesn't make difference. As for seeing any commits after sunday that might have fixed this (not sure) I see loads of commits,
I can't keep up with this.

I think the best thing for me to do, is to not say anything, until after all of this merging is done,(man santa is here!) then asses the situation.

Don't mean to cause any heat.

regards;

Justin P. Mattock

#6 lore raw

At Fri, 02 Jan 2009 11:01:47 -0800,

Quoted 78 lines · Justin P. Mattock
Quoted 49 lines · Takashi Iwai

At Thu, 01 Jan 2009 08:47:54 -0800,

Quoted 37 lines · Justin P. Mattock
Quoted 16 lines · Takashi Iwai

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 7 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

Quoted 10 lines

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

After adjusting my .config,
I am getting a speaker option to mute
the external speakers, as well as the headphones. the options that I added were:

SND_HRTIMER [=y]
SND_HDA_RECONFIG [=y]
SND_HDA_INPUT_BEEP [=y]

Quoted 8 lines

before adding these, like what I mentioned there was no "speaker" option(or "front"); As for the sound itself, I'll have to blast myself with some good tunes,
and see If I hear or experience any anomalies. (then wakeup the next day unable to hear); : )

Quoted 9 lines

Good to hear that it works now.
Could you check which config was broken exactly?
The config items above should be irrelevant with the (first) codec parsing, at least.

Takashi

After thinking back with what I did,
I was using 2.6.28-rc9 then(if I recall);
did a git-pull monday morning.
In the git log I remember seeing this:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=cb10ea549fdc0ab2dd8988adab5bf40b4fa642f3
then after compiling and rebooting
I noticed the mixer had changed.(thus seeing the no button for "front"). then after a few hours I reverted back to 2.6.28-rc9.
waited a few days and did a git-pull Wednesday morning,changed my .config (after sending the original post);
then noticed that the "front" had changed to "speaker" on the mixer itself. (telling myself "man I must be seeing things");

As for the .config options you're right, it doesn't make difference. As for seeing any commits after sunday that might have fixed this (not sure) I see loads of commits,
I can't keep up with this.

Quoted 5 lines

I think the best thing for me to do, is to not say anything, until after all of this merging is done,(man santa is here!)
then asses the situation.

Don't mean to cause any heat.

OK, let's see whether Santa really exists and fixed the things magically :)

thanks,

Takashi

#7 lore raw

I think so, look at CRED
Man that's nice..
Anyways I must have hit git at the wrong time. Thanks for the Info I'll post if I see any wiered anomalys.

regards,

justin P. Mattock

Quoted 93 lines · Takashi Iwai

At Fri, 02 Jan 2009 11:01:47 -0800,

Quoted 78 lines · Justin P. Mattock
Quoted 49 lines · Takashi Iwai

At Thu, 01 Jan 2009 08:47:54 -0800,

Quoted 37 lines · Justin P. Mattock
Quoted 16 lines · Takashi Iwai

At Wed, 31 Dec 2008 00:48:34 -0800,

Quoted 7 lines · Justin P. Mattock

Not sure if I have my configurations correct, but after pulling the latest git, I notice that my mixer has no switch to mute the "front", or external speaker on a macbook pro(ati chipset); other than that the sound sounds really good.
(solution I guess: plug-in headphones, and mute headphone option);

Could you run alsa-info.sh with --no-upload option on both old and new kernels, and attach the generated files to compare? The script is found in
http://www.alsa-project.org/alsa-info.sh

Quoted 10 lines

You can find some other information regarding HD-audio in Documentation/sound/alsa/HD-Audio.txt.

thanks,

Takashi

After adjusting my .config,
I am getting a speaker option to mute
the external speakers, as well as the headphones. the options that I added were:

SND_HRTIMER [=y]
SND_HDA_RECONFIG [=y]
SND_HDA_INPUT_BEEP [=y]

Quoted 8 lines

before adding these, like what I mentioned there was no "speaker" option(or "front"); As for the sound itself, I'll have to blast myself with some good tunes,
and see If I hear or experience any anomalies. (then wakeup the next day unable to hear); : )

Quoted 9 lines

Good to hear that it works now.
Could you check which config was broken exactly?
The config items above should be irrelevant with the (first) codec parsing, at least.

Takashi

After thinking back with what I did,
I was using 2.6.28-rc9 then(if I recall);
did a git-pull monday morning.
In the git log I remember seeing this:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=cb10ea549fdc0ab2dd8988adab5bf40b4fa642f3
then after compiling and rebooting
I noticed the mixer had changed.(thus seeing the no button for "front"). then after a few hours I reverted back to 2.6.28-rc9.
waited a few days and did a git-pull Wednesday morning,changed my .config (after sending the original post);
then noticed that the "front" had changed to "speaker" on the mixer itself. (telling myself "man I must be seeing things");

As for the .config options you're right, it doesn't make difference. As for seeing any commits after sunday that might have fixed this (not sure) I see loads of commits,
I can't keep up with this.

Quoted 5 lines

I think the best thing for me to do, is to not say anything, until after all of this merging is done,(man santa is here!) then asses the situation.

Don't mean to cause any heat.

OK, let's see whether Santa really exists and fixed the things magically :)

thanks,

Takashi