linux-next: Tree for January 12
Subsystems (2)
Hi all,
Some people took me at my word and so we have the 2.6.30 code starting to trickle in already.
Changes since 20090109:
Undropped tree:
ocfs2
Dropped trees (temporarily):
rr (difficult conflict)
mfd (build problem)
drm (build problem)
cpu_alloc (build problem)
audit (difficult conflicts)
Linus' tree gained a build failure which caused me to revert a merge.
The driver-core tree inherited a conflicts from the scsi tree.
The scsi tree lost its conflicts.
The ocfs2 tree lost its build failure.
The mtd tree lost its conflicts.
The blk-removal tree lost its conflict.
The firmware tree lost its conflicts.
The kmemcheck tree inherited a conflicts from the nommu tree.
The mfd tree gained a build failure so I dropped it.
The drm tree gained a build failure so I dropped it.
The nommu tree lost its conflict.
----------------------------------------------------------------------------
I have created today's linux-next tree atgit://git.kernel.org/pub/scm/linux/kernel/git/sfr/linux-next.git
(patches at
http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).
You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig, ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES) and i386, sparc and sparc64 defconfig.
Below is a summary of the state of the merge.
We are up to 129 trees (counting Linus' and 15 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
Signature · 148 lines
Cheers, Stephen Rothwell [email protected] $ git checkout master $ git reset --hard stable Merging origin/master Created commit a3e6439: Revert "Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip" Merging arm-current/master Merging m68k-current/for-linus Merging powerpc-merge/merge Merging sparc-current/master Merging scsi-rc-fixes/master Merging net-current/master Merging sound-current/for-linus Merging pci-current/for-linus Merging wireless-current/master Merging kbuild-current/master Merging quilt/driver-core.current Merging quilt/usb.current Merging cpufreq-current/fixes Merging input-current/for-linus Merging md-current/for-linus Merging audit-current/for-linus CONFLICT (content): Merge conflict in drivers/char/tty_audit.c CONFLICT (content): Merge conflict in kernel/auditsc.c Merging dwmw2/master Merging arm/devel Merging avr32/avr32-arch Merging blackfin/for-linus Merging cris/for-next Merging ia64/test Merging m68k/for-next Merging m68knommu/for-next Merging mips/mips-for-linux-next Merging parisc/master Merging powerpc/next Merging 4xx/next Merging galak/next Merging pxa/for-next Merging s390/features Merging sh/master Merging sparc/master Merging x86/auto-x86-next Merging xtensa/master Merging quilt/driver-core CONFLICT (content): Merge conflict in drivers/scsi/scsi_ioctl.c Merging quilt/usb Merging tip-core/auto-core-next Merging cpus4096/auto-cpus4096-next CONFLICT (content): Merge conflict in kernel/rcuclassic.c Merging ftrace/auto-ftrace-next Merging genirq/auto-genirq-next Merging safe-poison-pointers/auto-safe-poison-pointers-next Merging sched/auto-sched-next Merging stackprotector/auto-stackprotector-next Merging timers/auto-timers-next CONFLICT (content): Merge conflict in kernel/time/tick-common.c Merging pci/linux-next Merging quilt/device-mapper Merging hid/for-next Merging quilt/i2c Merging quilt/jdelvare-hwmon Merging quilt/kernel-doc Merging v4l-dvb/master Merging jfs/next Merging kbuild/master Merging quilt/ide Merging libata/NEXT Merging nfs/linux-next Merging xfs/master Merging infiniband/for-next Merging acpi/test Merging nfsd/nfsd-next Merging ieee1394/for-next Merging ubi/linux-next Merging kvm/master Merging dlm/next Merging scsi/master Merging ocfs2/linux-next Merging ext4/next Merging async_tx/next Merging udf/for_next Merging net/master Merging mtd/master Merging wireless/master Merging crypto/master Merging vfs/for-next Merging sound/for-next Merging cpufreq/next Merging v9fs/for-next Merging quilt/rr CONFLICT (content): Merge conflict in arch/powerpc/kernel/sysfs.c CONFLICT (content): Merge conflict in init/main.c CONFLICT (content): Merge conflict in kernel/module.c $ git reset --hard Merging cifs/master Merging mmc/next Merging gfs2/master Merging input/next Merging bkl-removal/bkl-removal Merging ubifs/linux-next Merging lsm/for-next Merging block/for-next Merging embedded/master Merging firmware/master Merging pcmcia/master Merging battery/master Merging leds/for-mm Merging backlight/for-mm Merging kgdb/kgdb-next Merging slab/for-next Merging uclinux/for-next Merging md/for-next Merging kmemcheck/auto-kmemcheck-next CONFLICT (content): Merge conflict in MAINTAINERS CONFLICT (content): Merge conflict in kernel/fork.c Merging generic-ipi/auto-generic-ipi-next Merging mfd/for-next $ git reset --hard HEAD^ Merging hdlc/hdlc-next Merging drm/drm-next $ git reset --hard HEAD^ Merging voltage/for-next Merging security-testing/next Merging lblnet/master Merging quilt/ttydev Merging agp/agp-next Merging oprofile/auto-oprofile-next Merging fastboot/auto-fastboot-next Merging sparseirq/auto-sparseirq-next Merging iommu/auto-iommu-next Merging uwb/for-upstream Merging watchdog/master Merging proc/proc Merging bdev/master Merging dwmw2-iommu/master CONFLICT (content): Merge conflict in drivers/pci/intel-iommu.c CONFLICT (content): Merge conflict in include/linux/dma_remapping.h Merging cputime/cputime Merging osd/linux-next Merging fatfs/master Merging fuse/for-next Merging jc_docs/docs-next Merging nommu/master Merging trivial/for-next Merging squashfs/master Merging quilt/staging Merging scsi-post-merge/master
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 4 lines · Stephen Rothwell
Hi all,
Some people took me at my word and so we have the 2.6.30 code starting to trickle in already.
When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple definitions of:
build-r8250.out:(.text+0x1d8ad0): multiple definition of MD5Init' build-r8250.out:(.text+0x1dbb30): multiple definition of MD5Update' build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final'
all of which need to have more unique identifiers for their global symbols (e.g., rt28_md5_init, cifs_md5_init, foo, blah, bar).
Signature · 1 line
~Randy
Re: linux-next: Tree for January 12 (cifs vs. staging)
There is not just the cifs md5 one (which has been around a long time), but an md5_init (static) in crypto and the new one in rt. The
addition of the new one (rt md5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.
Quoted 22 lines · Randy Dunlap
Quoted 4 lines · Stephen Rothwell
Hi all,
Some people took me at my word and so we have the 2.6.30 code starting to trickle in already.
When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple definitions of:
build-r8250.out:(.text+0x1d8ad0): multiple definition of
MD5Init' build-r8250.out:(.text+0x1dbb30): multiple definition ofMD5Update' build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final'all of which need to have more unique identifiers for their global symbols (e.g.,
rt28_md5_init,cifs_md5_init, foo, blah, bar).--
~Randy
Signature · 3 lines
Thanks, Steve
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 6 lines · Steve French
There is not just the cifs md5 one (which has been around a long time), but an
md5_init(static) in crypto and the new one in rt. The
addition of the new one (rtmd5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.
I'll fix up the staging rt drivers to not do this, but cifs shouldn't be declaring such functions as globals either :)
thanks,
greg k-h
Re: linux-next: Tree for January 12 (cifs vs. staging)
Is there some magic compile option alternative (other than renaming the function, which may be ok, since others probably don't depend on it)? MD5Init is used outside fs/cifs/md5.c so can't be static
Quoted 15 lines · Greg KH
Quoted 6 lines · Steve French
There is not just the cifs md5 one (which has been around a long time), but an
md5_init(static) in crypto and the new one in rt. The
addition of the new one (rtmd5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.I'll fix up the staging rt drivers to not do this, but cifs shouldn't be declaring such functions as globals either :)
thanks,
greg k-h
Signature · 3 lines
Thanks, Steve
Re: linux-next: Tree for January 12 (cifs vs. staging)
A: No.
Q: Should I include quotations after my reply?
Quoted 3 lines · Steve French
Is there some magic compile option alternative (other than renaming the function, which may be ok, since others probably don't depend on it)? MD5Init is used outside
fs/cifs/md5.cso can't be static
No, you should rename it to cifs_md5init to show that it is only for the cifs module to use. Try not to polute the global namespace with generic function names.
thanks,
greg k-h
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 8 lines · Greg KH
Quoted 3 lines · Steve French
Is there some magic compile option alternative (other than renaming the function, which may be ok, since others probably don't depend on it)? MD5Init is used outside
fs/cifs/md5.cso can't be staticNo, you should rename it to
cifs_md5initto show that it is only for the cifs module to use. Try not to polute the global namespace with generic function names.
Looks like cifs has the following related functions which I can rename if that makes it easier:
001a2e9 R_386_PC32 MD5Final
0001a302 R_386_PC32 MD5Update 0001a38c R_386_PC32 MD5Init 0001a39f R_386_PC32 MD5Update
Any others that I missed ...
Signature · 3 lines
Thanks, Steve
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 10 lines · Steve French
Quoted 8 lines · Greg KH
Quoted 3 lines · Steve French
Is there some magic compile option alternative (other than renaming the function, which may be ok, since others probably don't depend on it)? MD5Init is used outside
fs/cifs/md5.cso can't be staticNo, you should rename it to
cifs_md5initto show that it is only for the cifs module to use. Try not to polute the global namespace with generic function names.
Quoted 6 lines
Looks like cifs has the following related functions which I can rename if that makes it easier:
001a2e9R_386_PC32MD5Final0001a302 R_386_PC32 MD5Update 0001a38c R_386_PC32 MD5Init 0001a39f R_386_PC32 MD5Update
That would make life easier for you as well :)
Quoted 1 line
Any others that I missed ...
Not that I see at the moment, but you might want to look at all of your global symbol names to make sure they start with "cifs_".
thanks,
greg k-h
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 18 lines · Greg KH
Quoted 10 lines · Steve French
Quoted 8 lines · Greg KH
Quoted 3 lines · Steve French
Is there some magic compile option alternative (other than renaming the function, which may be ok, since others probably don't depend on it)? MD5Init is used outside
fs/cifs/md5.cso can't be staticNo, you should rename it to
cifs_md5initto show that it is only for the cifs module to use. Try not to polute the global namespace with generic function names.Quoted 6 lines
Looks like cifs has the following related functions which I can rename if that makes it easier:
001a2e9R_386_PC32MD5Final0001a302 R_386_PC32 MD5Update 0001a38c R_386_PC32 MD5Init 0001a39f R_386_PC32 MD5Update
Quoted 6 lines
That would make life easier for you as well :)
Quoted 1 line
Any others that I missed ...
Not that I see at the moment, but you might want to look at all of your global symbol names to make sure they start with "
cifs_".
I had gone through the cifs.ko module's namespace a few times years ago to make sure that most of the names were unlikely to cause problems, but it is a moving target (functions get added and static ones get moved etc. over time), and keeping functions names reasonably short but still descriptive can be helpful (as long as they are likely
to be unique). Looking at it now, the vast majority have something
smb/cifs specific in the function name (e.g. cifs or SMB or less
commonly: lanman or trans2 or ntlm etc. which are also likely to be unique)
Signature · 3 lines
Thanks, Steve
Re: linux-next: Tree for January 12 (cifs vs. staging)
In reply to Greg KHQuoted 10 lines · Greg KH
Quoted 6 lines · Steve French
There is not just the cifs md5 one (which has been around a long time), but an
md5_init(static) in crypto and the new one in rt. The
addition of the new one (rtmd5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.I'll fix up the staging rt drivers to not do this, but cifs shouldn't be declaring such functions as globals either :)
I have changed the names of cifs's md5 functions in the cifs-2.6.git tree
fs/cifs/md5.h +3 -3
@@ -20,10 +20,10 @@ struct HMACMD5Context { };#endif /* _HMAC_MD5_H */ -void MD5Init (struct MD5Context *context); -void MD5Update (struct MD5Context *context,unsigned char const *buf, +void cifs_MD5_init (struct MD5Context *context); +void cifs_MD5_update (struct MD5Context *context,unsigned char const *buf,unsigned len); -void MD5Final (unsigned char digest[16 ],struct MD5Context *context); +void cifs_MD5_final (unsigned char digest[16 ],struct MD5Context *context);
Signature · 3 lines
Thanks, Steve
Re: linux-next: Tree for January 12 (cifs vs. staging)
fs/cifs/md5.h
Quoted 4 lines · Steve French
I have changed the names of cifs's md5 functions in the cifs-2.6.git tree
fs/cifs/md5.h +0
-0
I presume there will be another git commit immediately following to fix up the call sites?
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 9 lines · On Mon, 2009-01-12 at 21:01 -0500, [email protected] wrote:
fs/cifs/md5.h
Quoted 4 lines · Steve French
I have changed the names of cifs's md5 functions in the cifs-2.6.git tree
fs/cifs/md5.h +0
-0I presume there will be another git commit immediately following to fix up the call sites?
The git tree has the entire fix. Steve's post just contained a piece of it.
Shaggy
Signature · 2 lines
David Kleikamp IBM Linux Technology Center
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 5 lines · Dave Kleikamp
Quoted 4 lines · On Mon, 2009-01-12 at 21:01 -0500, [email protected] wrote:
Quoted 2 lines · Steve French
I have changed the names of cifs's md5 functions in the cifs-2.6.git tree
Quoted 8 lines
Quoted 5 lines
fs/cifs/md5.h
Quoted 2 lines
fs/cifs/md5.h +0
-0I presume there will be another git commit immediately following to fix up the call sites?
The git tree has the entire fix. Steve's post just contained a piece of it.
Oh, OK. Thanks for verifying that for those of us playing along at home. ;)
Re: linux-next: Tree for January 12 (cifs vs. staging)
In reply to Steve FrenchQuoted 6 lines · Steve French
There is not just the cifs md5 one (which has been around a long time), but an
md5_init(static) in crypto and the new one in rt. The
addition of the new one (rtmd5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.
Is that due to the byte-swapping? Can the cifs and rt* drivers use the same code. rt28[67]0/common/md5.c are identical files. In fact those "common" directories should probably be combined into a single truly common directory.
Quoted 26 lines · Randy Dunlap
Quoted 22 lines
Quoted 4 lines · Stephen Rothwell
Hi all,
Some people took me at my word and so we have the 2.6.30 code starting to trickle in already.
When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple definitions of:
build-r8250.out:(.text+0x1d8ad0): multiple definition of
MD5Init' build-r8250.out:(.text+0x1dbb30): multiple definition ofMD5Update' build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final'all of which need to have more unique identifiers for their global symbols (e.g.,
rt28_md5_init,cifs_md5_init, foo, blah, bar).--
~Randy
Signature · 2 lines
David Kleikamp IBM Linux Technology Center
Re: linux-next: Tree for January 12 (cifs vs. staging)
Quoted 8 lines · Dave Kleikamp
Quoted 6 lines · Steve French
There is not just the cifs md5 one (which has been around a long time), but an
md5_init(static) in crypto and the new one in rt. The
addition of the new one (rtmd5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.
Quoted 4 lines
Is that due to the byte-swapping? Can the cifs and rt* drivers use the same code. rt28[67]0/common/md5.c are identical files. In fact those "common" directories should probably be combined into a single truly common directory.
Yes, the "common" directories are going to be merged, but as they originally came from different driver sources, they didn't start out that way. It will take some refactoring to get it to work properly, which is on my todo list...
thanks,
greg k-h
Re: linux-next: Tree for January 12 (cifs vs. staging)
In reply to Dave Kleikampmd5 support of course belongs in crypto/md5.c in a perfect world
The fs/cifs/md5.c code (and cifs/md4.c for that matter) is very generic md5 code, nothing much cifs specific although it would be worth looking at whether there are endian issues.
CIFS uses md5 in two places, calculating an hmac in fs/cifs/md5.c and then in calculating packet signatures on SMB/CIFS packets. CIFS usage of md5 is really simple (see below), basically we run MD5 on an SMB/CIFS packet passing in the length (and the key) to calculate a 20 byte signature (which is sent to the server on requests, and we calculate the expected signature to verify that responses from the
server have not been tampered with). When we last checked on this
with the crypto guys, it would take a lot more code to do this using the common crypto routines since they were setup to handle more complex use cases.
static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu,
const struct mac_key *key, char *signature)
{
struct MD5Context context;
...
MD5Init(&context);
MD5Update(&context, (char *)&key->data, key->len);
MD5Update(&context, cifs_pdu->Protocol /* beginning of packet
*/, cifs_pdu->smb_buf_length);
MD5Final(signature, &context);
return 0;
}Quoted 44 lines · Dave Kleikamp
Quoted 6 lines · Steve French
There is not just the cifs md5 one (which has been around a long time), but an
md5_init(static) in crypto and the new one in rt. The
addition of the new one (rtmd5_init) causes the build problem. It
would be nice if we could use the same md5 routines though ... last time we checked the crypto one was not well suited for calculating signatures as a network fs would do though.Is that due to the byte-swapping? Can the cifs and rt* drivers use the same code. rt28[67]0/common/md5.c are identical files. In fact those "common" directories should probably be combined into a single truly common directory.
Quoted 16 lines · Randy Dunlap
Quoted 15 lines
Quoted 4 lines · Stephen Rothwell
Hi all,
Some people took me at my word and so we have the 2.6.30 code starting to trickle in already.
When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple definitions of:
build-r8250.out:(.text+0x1d8ad0): multiple definition of
MD5Init' build-r8250.out:(.text+0x1dbb30): multiple definition ofMD5Update' build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final'Quoted 10 lines
Quoted 7 lines
all of which need to have more unique identifiers for their global symbols (e.g.,
rt28_md5_init,cifs_md5_init, foo, blah, bar).--
~Randy--
David Kleikamp
IBM Linux Technology Center
Signature · 3 lines
Thanks, Steve
PATCH 1/1 libfc: needs CRC32
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
libfc uses crc32 functions, so cause it to be built via select:
drivers/built-in.o: In function `fc_frame_crc_check':
(.text+0x75dae): undefined reference to crc32_le' drivers/built-in.o: In function fc_fcp_recv':
fc_fcp.c:(.text+0x7b919): undefined reference to crc32_le' fc_fcp.c:(.text+0x7b9d5): undefined reference to crc32_le' fc_fcp.c:(.text+0x7ba54): undefined reference to `crc32_le'
--- drivers/scsi/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/Kconfig +1 -0
@@ -608,6 +608,7 @@ config SCSI_FLASHPOINT config LIBFC tristate "LibFC module" select SCSI_FC_ATTRS + select CRC32 ---help--- Fibre Channel library module
Signature · 1 line
~Randy
RE: [PATCH -next] libfc: needs CRC32
Quoted 5 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
libfc uses crc32 functions, so cause it to be built via select:
Quoted 8 lines
drivers/built-in.o: In function `fc_frame_crc_check':
(.text+0x75dae): undefined reference tocrc32_le' drivers/built-in.o: In functionfc_fcp_recv':
fc_fcp.c:(.text+0x7b919): undefined reference tocrc32_le' fc_fcp.c:(.text+0x7b9d5): undefined reference tocrc32_le' fc_fcp.c:(.text+0x7ba54): undefined reference to `crc32_le'Signed-off-by Randy Dunlap <[email protected]>
Quoted 17 lines
--- drivers/scsi/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/scsi/Kconfig +1
-1@@ -608,6 +608,7 @@ config SCSI_FLASHPOINT config LIBFC tristate "LibFC module" select SCSI_FC_ATTRS + select CRC32 ---help--- Fibre Channel library module --~Randy
PATCH 1/1 scsi_debug: needs CRC_T10DIF
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
Fix scsi_debug build error:
drivers/built-in.o: In function `resp_read':
scsi_debug.c:(.text+0x21379a): undefined reference to crc_t10dif' drivers/built-in.o: In function resp_write':
scsi_debug.c:(.text+0x213fca): undefined reference to `crc_t10dif'
--- drivers/scsi/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/Kconfig +1 -0
@@ -1535,6 +1535,7 @@ config SCSI_NSP32 config SCSI_DEBUG tristate "SCSI debugging host simulator" depends on SCSI + select CRC_T10DIF help This is a host adapter simulator that can simulate multiple hosts each with multiple dummy SCSI devices (disks). It defaults to one
Re: [PATCH -next] scsi_debug: needs CRC_T10DIF
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Randy" == Randy Dunlap <[email protected]> writes:
Randy> From: Randy Dunlap <[email protected]> Fix scsi_debug build Randy> error:
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
Re: linux-next: Tree for January 12 (afs/fscache)
In reply to Stephen RothwellQuoted 4 lines · Stephen Rothwell
Hi all,
Some people took me at my word and so we have the 2.6.30 code starting to trickle in already.
AFS=y.
FSCACHE=m.AFS_FSCACHE is not set.
config attached.
fs/built-in.o: In function `afs_cell_purge':
(.text+0x2dd50): undefined reference to __fscache_relinquish_cookie' fs/built-in.o: In function fscache_uncache_page':
file.c:(.text+0x2f320): undefined reference to __fscache_uncache_page' fs/built-in.o: In function afs_readpages':
file.c:(.text+0x2f4fb): undefined reference to __fscache_read_or_alloc_pages' fs/built-in.o: In function afs_readpage':
file.c:(.text+0x2f5ac): undefined reference to __fscache_read_or_alloc_page' file.c:(.text+0x2f662): undefined reference to __fscache_write_page' fs/built-in.o: In function `fscache_relinquish_cookie':
inode.c:(.text+0x32097): undefined reference to __fscache_relinquish_cookie' fs/built-in.o: In function afs_iget':
(.text+0x324e8): undefined reference to __fscache_acquire_cookie' fs/built-in.o: In function afs_iget':
(.text+0x325a6): undefined reference to __fscache_attr_changed' fs/built-in.o: In function fscache_update_cookie':
vlocation.c:(.text+0x3531d): undefined reference to __fscache_update_cookie' fs/built-in.o: In function afs_vlocation_reaper':
vlocation.c:(.text+0x354ee): undefined reference to __fscache_relinquish_cookie' fs/built-in.o: In function afs_vlocation_lookup':
(.text+0x358db): undefined reference to __fscache_acquire_cookie' fs/built-in.o: In function afs_put_volume':
(.text+0x36b0f): undefined reference to __fscache_relinquish_cookie' fs/built-in.o: In function afs_volume_lookup':
(.text+0x36ef0): undefined reference to `__fscache_acquire_cookie'
Signature · 1 line
~Randy
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc1
# Sun Jan 11 20:45:54 2009
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SYSVIPC=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=yCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=17CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not setCONFIG_RT_GROUP_SCHED=yCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
#
# Control Group support
#CONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=yCONFIG_CGROUP_NS=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not setCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=yCONFIG_CGROUP_MEM_RES_CTLR=yCONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=y
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_STRIP_GENERATED=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=y
# CONFIG_PRINTK is not setCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_COMPAT_BRK=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=y
# CONFIG_EPOLL is not setCONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=yCONFIG_SHMEM=y
# CONFIG_AIO is not setCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_SLOW_WORK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not setCONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not setCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=yCONFIG_SPARSE_IRQ=yCONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set CONFIG_X86_RDC321X=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not set
# CONFIG_KVM_CLOCK is not setCONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_CLOCK is not set CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not setCONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CPU=yCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_XADD=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y CONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_CYRIX_32=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR_32=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=yCONFIG_X86_DS=yCONFIG_X86_PTRACE_BTS=yCONFIG_HPET_TIMER=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not setCONFIG_NR_CPUS=8CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set # CONFIG_X86_MCE is not setCONFIG_VM86=yCONFIG_TOSHIBA=yCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=yCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1CONFIG_VIRT_TO_BUS=y
# CONFIG_UNEVICTABLE_LRU is not set CONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set # CONFIG_X86_RESERVE_LOW_64K is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not setCONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x100000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K6=yCONFIG_X86_POWERNOW_K7=yCONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_GX_SUSPMOD is not setCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=mCONFIG_X86_SPEEDSTEP_SMI=yCONFIG_X86_P4_CLOCKMOD=yCONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not setCONFIG_X86_E_POWERSAVER=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_OLPC=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not setCONFIG_PCI_LEGACY=yCONFIG_PCI_STUB=yCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not setCONFIG_MCA=yCONFIG_MCA_LEGACY=yCONFIG_MCA_PROC_FS=y
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=yCONFIG_OLPC=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=mCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not setCONFIG_UNIX=mCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=y
# CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set CONFIG_TCP_CONG_LP=yCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=m
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=yCONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_PIMSM_V2 is not set CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set CONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not setCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not setCONFIG_TIPC_DEBUG=yCONFIG_ATM=yCONFIG_ATM_CLIP=mCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=yCONFIG_ATM_BR2684=yCONFIG_ATM_BR2684_IPFILTER=yCONFIG_STP=mCONFIG_GARP=m
# CONFIG_BRIDGE is not setCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not setCONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not setCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=yCONFIG_NET_DSA_MV88E6123_61_65=yCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=y
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not setCONFIG_X25=m
# CONFIG_LAPB is not setCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not setCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=m
# CONFIG_NET_SCH_PRIO is not setCONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not setCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_CLS_CGROUP=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=yCONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=yCONFIG_NET_ACT_GACT=yCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_NAT is not setCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=y
# CONFIG_NET_ACT_SKBEDIT is not setCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=yCONFIG_DCB=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_TCPPROBE=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not setCONFIG_ROSE=y
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not setCONFIG_6PACK=mCONFIG_BPQETHER=yCONFIG_SCC=mCONFIG_SCC_DELAY=yCONFIG_SCC_TRXECHO=yCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=yCONFIG_YAM=yCONFIG_CAN=y
# CONFIG_CAN_RAW is not setCONFIG_CAN_BCM=y
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=y
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not setCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#CONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=mCONFIG_TOSHIBA_FIR=mCONFIG_SMC_IRCC_FIR=yCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_BT=y
# CONFIG_BT_L2CAP is not setCONFIG_BT_SCO=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not setCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIVHCI=yCONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
# CONFIG_PHONET is not setCONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not setCONFIG_WIRELESS_EXT=yCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=yCONFIG_WIMAX=mCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=mCONFIG_RFKILL_INPUT=mCONFIG_NET_9P=y
# CONFIG_NET_9P_RDMA is not setCONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=mCONFIG_EEPROM_93CX6=mCONFIG_SGI_IOC4=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not setCONFIG_ENCLOSURE_SERVICES=yCONFIG_HP_ILO=m
# CONFIG_C2PORT is not setCONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not setCONFIG_FUSION=yCONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_IEEE1394 is not setCONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set CONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not setCONFIG_I2O_PROC=mCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_IFB=m
# CONFIG_DUMMY is not setCONFIG_BONDING=mCONFIG_MACVLAN=mCONFIG_EQUALIZER=mCONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set CONFIG_NATIONAL_PHY=m
# CONFIG_STE10XP is not set CONFIG_LSI_ET1011C_PHY=m CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=mCONFIG_MDIO_GPIO=mCONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set CONFIG_LANCE=yCONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
# CONFIG_ULTRAMCA is not set CONFIG_ULTRA=mCONFIG_SMC9194=mCONFIG_ENC28J60=m CONFIG_ENC28J60_WRITEVERIFY=y CONFIG_NET_VENDOR_RACAL=yCONFIG_NI52=mCONFIG_NI65=yCONFIG_NET_TULIP=y
# CONFIG_DE2104X is not setCONFIG_TULIP=mCONFIG_TULIP_MWI=yCONFIG_TULIP_MMIO=yCONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=mCONFIG_WINBOND_840=yCONFIG_DM9102=mCONFIG_ULI526X=yCONFIG_AT1700=yCONFIG_DEPCA=mCONFIG_HP100=mCONFIG_NET_ISA=yCONFIG_E2100=m
# CONFIG_EWRK3 is not set CONFIG_EEXPRESS=yCONFIG_EEXPRESS_PRO=m
# CONFIG_HPLAN_PLUS is not set CONFIG_HPLAN=y
# CONFIG_LP486E is not setCONFIG_ETH16I=m
# CONFIG_NE2000 is not setCONFIG_ZNET=yCONFIG_SEEQ8005=yCONFIG_NE2_MCA=yCONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=yCONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set CONFIG_APRICOT=yCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y
# CONFIG_FORCEDETH is not set CONFIG_CS89x0=mCONFIG_E100=mCONFIG_FEALNX=y
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not setCONFIG_R6040=yCONFIG_SIS900=m
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=yCONFIG_SUNDANCE=mCONFIG_SUNDANCE_MMIO=yCONFIG_TLAN=yCONFIG_VIA_RHINE=mCONFIG_VIA_RHINE_MMIO=yCONFIG_SC92031=yCONFIG_ATL2=mCONFIG_NETDEV_1000=yCONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=yCONFIG_DL2K=m
# CONFIG_E1000 is not setCONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set CONFIG_R8169=yCONFIG_R8169_VLAN=yCONFIG_SIS190=yCONFIG_SKGE=mCONFIG_SKGE_DEBUG=yCONFIG_SKY2=mCONFIG_SKY2_DEBUG=yCONFIG_VIA_VELOCITY=yCONFIG_TIGON3=yCONFIG_BNX2=mCONFIG_QLA3XXX=yCONFIG_ATL1=yCONFIG_ATL1E=mCONFIG_JME=yCONFIG_NETDEV_10000=yCONFIG_CHELSIO_T1=yCONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set CONFIG_ENIC=yCONFIG_IXGBE=yCONFIG_IXGBE_DCB=y
# CONFIG_IXGB is not setCONFIG_S2IO=mCONFIG_MYRI10GE=yCONFIG_NETXEN_NIC=mCONFIG_NIU=yCONFIG_MLX4_EN=mCONFIG_MLX4_CORE=mCONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not setCONFIG_BNX2X=m
# CONFIG_QLGE is not setCONFIG_SFC=m
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not setCONFIG_WLAN_80211=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_SDIO=mCONFIG_LIBERTAS_DEBUG=yCONFIG_AIRO=yCONFIG_HERMES=yCONFIG_HERMES_CACHE_FW_ON_INIT=yCONFIG_PLX_HERMES=mCONFIG_TMD_HERMES=y
# CONFIG_NORTEL_HERMES is not setCONFIG_PCI_HERMES=yCONFIG_ATMEL=mCONFIG_PCI_ATMEL=mCONFIG_PRISM54=m
# CONFIG_IPW2100 is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=y
# CONFIG_IPW2200_QOS is not setCONFIG_IPW2200_DEBUG=yCONFIG_LIBIPW=mCONFIG_LIBIPW_DEBUG=y
# CONFIG_IWLWIFI_LEDS is not setCONFIG_HOSTAP=yCONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not setCONFIG_HOSTAP_PLX=m
# CONFIG_HOSTAP_PCI is not set
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=m
#
# Enable USB support to see WiMAX USB drivers
#CONFIG_WIMAX_I2400M_SDIO=mCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=m
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not setCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=yCONFIG_ATM_ZATM_DEBUG=yCONFIG_ATM_NICSTAR=mCONFIG_ATM_NICSTAR_USE_SUNI=y
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not setCONFIG_ATM_HORIZON=yCONFIG_ATM_HORIZON_DEBUG=yCONFIG_ATM_IA=yCONFIG_ATM_IA_DEBUG=yCONFIG_ATM_FORE200E=yCONFIG_ATM_FORE200E_USE_TASKLET=yCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not setCONFIG_ATM_SOLOS=yCONFIG_FDDI=m
# CONFIG_DEFXX is not setCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=yCONFIG_ROADRUNNER_LARGE_RINGS=y
# CONFIG_PPP is not setCONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not setCONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not setCONFIG_PHONE=y
# CONFIG_PHONE_IXJ is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not setCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not setCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_LKKBD=yCONFIG_KEYBOARD_XTKBD=yCONFIG_KEYBOARD_NEWTON=mCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_GPIO=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_TOUCHKIT=yCONFIG_MOUSE_PS2_OLPC=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not setCONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_GPIO=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not setCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=yCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not setCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_JOYDUMP is not setCONFIG_INPUT_TABLET=y
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not setCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not setCONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
# CONFIG_VT is not setCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_FOURPORT=m
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not setCONFIG_SERIAL_8250_HUB6=mCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=yCONFIG_SERIAL_8250_MCA=m
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not setCONFIG_HW_RANDOM_VIA=m
# CONFIG_NVRAM is not setCONFIG_DTLK=yCONFIG_R3964=m
# CONFIG_APPLICOM is not setCONFIG_SONYPI=y
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not setCONFIG_NSC_GPIO=yCONFIG_CS5535_GPIO=mCONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not setCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not setCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=m
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not setCONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not setCONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not setCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_GPIO=mCONFIG_I2C_OCORES=mCONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_TAOS_EVM=m
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_ISA=mCONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_STUB=m
# CONFIG_SCx200_I2C is not set
CONFIG_SCx200_ACB=m
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=m
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not setCONFIG_PCF8575=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not setCONFIG_SENSORS_TSL2550=mCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=yCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_TLE62X0=mCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MCP23S08 is not setCONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not setCONFIG_W1_MASTER_DS2482=mCONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=mCONFIG_W1_SLAVE_BQ27000=mCONFIG_POWER_SUPPLY=mCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=mCONFIG_WM8350_POWER=mCONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_HWMON=mCONFIG_HWMON_VID=mCONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADCXX=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not setCONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not setCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=m
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not setCONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS1621 is not setCONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_F71805F is not setCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHER=mCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not setCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=m
# CONFIG_SENSORS_LM75 is not setCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not setCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4245 is not setCONFIG_SENSORS_MAX1111=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not setCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83L785TS is not setCONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not setCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not setCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_WM8350_WATCHDOG=mCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not setCONFIG_EUROTECH_WDT=yCONFIG_IB700_WDT=m
# CONFIG_IBMASR is not setCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=yCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=yCONFIG_SC1200_WDT=y
CONFIG_SCx200_WDT=m
# CONFIG_PC87413_WDT is not set
# CONFIG_RDC321X_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not setCONFIG_SBC7240_WDT=yCONFIG_CPU5_WDT=yCONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not setCONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not setCONFIG_W83697UG_WDT=yCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=yCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=y
#
# ISA-based Watchdog Cards
#CONFIG_PCWATCHDOG=yCONFIG_MIXCOMWD=m
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not setCONFIG_WDTPCI=yCONFIG_WDT_501_PCI=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not setCONFIG_HTC_PASIC3=mCONFIG_TPS65010=m
# CONFIG_MFD_TMIO is not setCONFIG_MFD_WM8400=mCONFIG_MFD_WM8350=mCONFIG_MFD_WM8350_I2C=mCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not setCONFIG_REGULATOR_BQ24022=yCONFIG_REGULATOR_WM8350=mCONFIG_REGULATOR_WM8400=m
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not setCONFIG_DVB_CORE=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=mCONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMIZE=yCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not setCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not setCONFIG_MEDIA_TUNER_MT2131=m
# CONFIG_MEDIA_TUNER_QT1010 is not setCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not setCONFIG_MEDIA_TUNER_MXL5007T=m
# CONFIG_DVB_DYNAMIC_MINORS is not setCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=mCONFIG_DVB_BUDGET_CORE=m
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=mCONFIG_DVB_B2C2_FLEXCOP_PCI=mCONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#CONFIG_DVB_DM1105=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not setCONFIG_DVB_STB6100=m
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not setCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0288=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0299=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8261=m
# CONFIG_DVB_VES1X93 is not setCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=mCONFIG_DVB_CX24116=mCONFIG_DVB_SI21XX=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=m
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_DRX397XD is not setCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=m
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not setCONFIG_DVB_DIB7000M=m
# CONFIG_DVB_DIB7000P is not setCONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=m
# CONFIG_DVB_OR51211 is not setCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_LGDT3304=m
# CONFIG_DVB_S5H1409 is not setCONFIG_DVB_AU8522=m
# CONFIG_DVB_S5H1411 is not set
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=m
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=m
# CONFIG_DVB_TUNER_DIB0070 is not set
#
# SEC control devices for DVB-S
#CONFIG_DVB_LNBP21=m
# CONFIG_DVB_ISL6405 is not setCONFIG_DVB_ISL6421=m
# CONFIG_DVB_LGS8GL5 is not set
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=yCONFIG_DVB_AF9013=mCONFIG_DAB=y
#
# Graphics support
#
# CONFIG_AGP is not setCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not setCONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not setCONFIG_UWB=y
# CONFIG_UWB_WHCI is not setCONFIG_UWB_WLP=yCONFIG_MMC=yCONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_SDIO_UART is not setCONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not setCONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not setCONFIG_MEMSTICK=mCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=mCONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_NEW_LEDS is not setCONFIG_ACCESSIBILITY=yCONFIG_INFINIBAND=mCONFIG_INFINIBAND_USER_MAD=m
# CONFIG_INFINIBAND_USER_ACCESS is not setCONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not setCONFIG_INFINIBAND_AMSO1100=mCONFIG_INFINIBAND_AMSO1100_DEBUG=yCONFIG_MLX4_INFINIBAND=mCONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not setCONFIG_INFINIBAND_IPOIB=mCONFIG_INFINIBAND_IPOIB_CM=yCONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not setCONFIG_EDAC=y
#
# Reporting subsystems
#CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not setCONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not setCONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not setCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_S35390A=mCONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not setCONFIG_RTC_DRV_R9701=yCONFIG_RTC_DRV_RS5C348=mCONFIG_RTC_DRV_DS3234=y
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not setCONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not setCONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not setCONFIG_RTC_DRV_STK17TA8=mCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_V3020 is not setCONFIG_RTC_DRV_WM8350=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not setCONFIG_UIO=yCONFIG_UIO_CIF=mCONFIG_UIO_PDRV=y
# CONFIG_UIO_PDRV_GENIRQ is not setCONFIG_UIO_SMX=mCONFIG_UIO_SERCOS3=yCONFIG_STAGING=yCONFIG_STAGING_EXCLUDE_BUILD=yCONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=y
# CONFIG_DMIID is not setCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=m
#
# File systems
#CONFIG_FS_POSIX_ACL=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not setCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not setCONFIG_FUSE_FS=mCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=mCONFIG_FSCACHE_STATS=yCONFIG_FSCACHE_HISTOGRAM=yCONFIG_FSCACHE_DEBUG=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not setCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ECRYPT_FS is not setCONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not setCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not setCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_SUNRPC_XPRT_RDMA=mCONFIG_SUNRPC_REGISTER_V4=yCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=mCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=yCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_UPCALL=yCONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not setCONFIG_CIFS_DEBUG2=yCONFIG_CIFS_EXPERIMENTAL=yCONFIG_CIFS_DFS_UPCALL=yCONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not setCONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not setCONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not setCONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not setCONFIG_9P_FS=yCONFIG_NLS=mCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not setCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not setCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not setCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not setCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not setCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not setCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not setCONFIG_NLS_KOI8_U=m
# CONFIG_NLS_UTF8 is not setCONFIG_DLM=mCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not setCONFIG_DEBUG_MEMORY_INIT=yCONFIG_FRAME_POINTER=yCONFIG_RCU_CPU_STALL_DETECTOR=yCONFIG_LATENCYTOP=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_HW_BRANCH_TRACER=yCONFIG_RING_BUFFER=yCONFIG_TRACING=y
#
# Tracers
#CONFIG_SYSPROF_TRACER=y
# CONFIG_HW_BRANCH_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not setCONFIG_BUILD_DOCSRC=yCONFIG_SAMPLES=yCONFIG_SAMPLE_MARKERS=mCONFIG_SAMPLE_TRACEPOINTS=m
# CONFIG_SAMPLE_KOBJECT is not setCONFIG_SAMPLE_KPROBES=mCONFIG_SAMPLE_KRETPROBES=mCONFIG_HAVE_ARCH_KGDB=yCONFIG_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DOUBLEFAULT is not setCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not setCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not setCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_SEQIV=m
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=mCONFIG_CRYPTO_CTS=mCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=m
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_SALSA20=yCONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not setCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y