sscape: fix incorrect timeout after microcode upload
PATCH 1/1 sscape: fix incorrect timeout after microcode upload
From: Krzysztof Helt <[email protected]>
A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks.
---
Ted tested that patch and it allowed him uploading a microcode into the Soundscape Elite. However, midi does not work for him yet.
sound/isa/sscape.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-)
sound/isa/sscape.c +10 -10
@@ -393,19 +393,19 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti*/ static int obp_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +while (time_before (jiffies, end_time)) {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if ((x &0xfe ) ==0xfe )return 1 ; - --timeout; +msleep (10 ); }/* while */ return 0 ;
@@ -420,19 +420,19 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)*/ static int host_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +while (time_before (jiffies, end_time)) {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if (x ==0xfe )return 1 ; - --timeout; +msleep (10 ); }/* while */ return 0 ;
@@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s,* give it 5 seconds (max) ... */ ret =0 ; -if (!obp_startup_ack (s,5 )) { +if (!obp_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: No response from on-board processor after upload\n" ); ret = -EAGAIN ; - }else if (!host_startup_ack (s,5 )) { + }else if (!host_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: SoundScape failed to initialise\n" ); ret = -EAGAIN ; }
Signature · 6 lines
1.5.2.2 ----------------------------------------------------------------------- Promocja w Speak Up. Kwartal angielskiego za darmo. 3 miesiace nauki gratis. Sprawdz teraz! >> http://link.interia.pl/f2019
At Mon, 12 Jan 2009 17:54:16 +0100,
Quoted 20 lines · Krzysztof Helt
From: Krzysztof Helt <[email protected]>
A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks.
Signed-off-by Krzysztof Helt <[email protected]>---
Ted tested that patch and it allowed him uploading a microcode into the Soundscape Elite. However, midi does not work for him yet.sound/isa/sscape.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-)sound/isa/sscape.c +0
-0
sound/isa/sscape.c static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti · line 398
Quoted 7 lines
sound/isa/sscape.c +3
-1@@ -393,19 +393,19 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti*/ static int obp_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +while (time_before (jiffies, end_time)) {
In general it's better to use a do-while for the time-out check. That is, the timeout should be checked after the data check.
Could you fix and repost?
thanks,
Takashi
Quoted 61 lines
sound/isa/sscape.c +7
-9unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if ((x &0xfe ) ==0xfe )return 1 ; - --timeout; +msleep (10 ); }/* while */ return 0 ;@@ -420,19 +420,19 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)*/ static int host_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +while (time_before (jiffies, end_time)) {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if (x ==0xfe )return 1 ; - --timeout; +msleep (10 ); }/* while */ return 0 ;@@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s,* give it 5 seconds (max) ... */ ret =0 ; -if (!obp_startup_ack (s,5 )) { +if (!obp_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: No response from on-board processor after upload\n" ); ret = -EAGAIN ; - }else if (!host_startup_ack (s,5 )) { + }else if (!host_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: SoundScape failed to initialise\n" ); ret = -EAGAIN ; }Signature · 6 lines
1.5.2.2 ----------------------------------------------------------------------- Promocja w Speak Up. Kwartal angielskiego za darmo. 3 miesiace nauki gratis. Sprawdz teraz! >> http://link.interia.pl/f2019
PATCH 1/1 serato phono patch
Add serato input phono switch
sound/usb/usbaudio.c +0 -0
@@ -2859,7 +2859,7 @@ static int snd_usb_create_streams(struct
snd_usb_audio *chip, int ctrlif)
/* find audiocontrol interface */
host_iface = &usb_ifnum_to_if(dev, ctrlif)->altsetting[0];
if (!(p1 = snd_usb_find_csint_desc(host_iface->extra,
host_iface->extralen, NULL, HEADER))) {
- snd_printk(KERN_ERR "cannot find HEADER\n");
+ snd_printk(KERN_ERR "cannot find HEADER for %d in %s\n",
ctrlif, host_iface->extra);
return -EINVAL;
}
if (! p1[7] || p1[0] < 8 + p1[7]) {sound/usb/usbmixer.c +0 -0
@@ -2012,6 +2012,233 @@ static void snd_audigy2nx_proc_read(struct
snd_info_entry *entry,
}
}
+void snd_usb_cleanup_interrupt_urb(struct urb* pUrb)
+{
+ if(pUrb->transfer_buffer_length > 0)
+ kfree(pUrb->transfer_buffer);
+
+ if(pUrb->context)
+ kfree(pUrb->context);
+
+ usb_free_urb(pUrb);
+}
+
+/* Wrapper for setting and submitting the interrupt urb().*/ +int snd_usb_interrupt_trans(struct usb_device *dev, unsigned int pipe, void *data,
+ __u16 size, usb_complete_t callback)
+{
+ int err; + void *buf = NULL; + struct urb* pUrb = NULL;
+
+ if (size > 0) {
+ buf = kmemdup(data, size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ }
+
+ pUrb = usb_alloc_urb(1/*int iso packets*/, GFP_KERNEL);
+
+ /*TODO: Remove hardcoded 4*/
+ usb_fill_int_urb(pUrb, dev, pipe, buf, size, callback, NULL, 4);
+
+ err = usb_submit_urb(pUrb, GFP_KERNEL);
+
+ return err;
+}
+
+#define snd_sl_phono_info snd_ctl_boolean_mono_info
+
+#define snd_sl_phono_receive snd_usb_cleanup_interrupt_urb
+
+#define snd_sl_phono_changed snd_sl_phono_receive
+
+static int snd_sl_phono_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = kcontrol->private_value;
+
+/* getting value of the device - commented out
+
+ snd_usb_interrupt_trans(mixer->chip->dev,
+ usb_rcvbulkpipe(mixer->chip->dev, 0x83),
+ buffer, bufferSize, snd_sl_phono_receive);
+
+ unsigned char statusMessage[] = {7};
+
+ snd_usb_interrupt_trans(mixer->chip->dev,
+ usb_sndintpipe(mixer->chip->dev, 0x03),
+ statusMessage, 1, snd_sl_phono_receive);
+*/
+
+ return 0;
+}
+
+/* Log of usb messages on startup
+STARTUP:
+
+IN 03 Length: 0x40 ...
+OUT 83 Length: 0x01 "00"
+IN 03 Length: 0x40 "00 00 03 00 FF FF 02 00 01 00 03 00 01 00 FB FF 01 00 FF FF 06 00 02 00 FF FF 03 00 05 00 00 00 06 00 FC FF FD FF 03 00 FD FF 04 00 FB FF F8 FF FC FF FD FF 06 00 01 00 01 00 FF FF 04 00 02 00" +
+IN 03 Length: 0x40 ...
+OUT 83 Length: 0x02 "07 01"
+IN 03 Length: 0x40 "07 FF 03 00 FF FF 02 00 01 00 03 00 01 00 FB FF 01 00 FF FF 06 00 02 00 FF FF 03 00 05 00 00 00 06 00 FC FF FD FF 03 00 FD FF 04 00 FB FF F8 FF FC FF FD FF 06 00 01 00 01 00 FF FF 04 00 02 00" +
+IN 03 Length: 0x40 ...
+OUT 83 Length: 0x01 "06"
+OUT 83 Length: 0x01 "00"
+IN 03 Length: 0x40 "00 FF FE FF FD FF 01 00 03 00 07 00 FE FF 08 00 03 00 00 00 FC FF 03 00 FF FF 00 00 01 00 03 00 FB FF F9 FF 01 00 FF FF FD FF 00 00 FE FF FA FF FF FF FD FF 01 00 04 00 00 00 03 00 FB FF 01 00" +
+IN 03 Length: 0x40 ...
+OUT 83 Length: 0x01 "01"
+IN 03 Length: 0x40 "01 42 FC 54 03 FF 01 00 03 00 07 00 FE FF 08 00 03 00 00 00 FC FF 03 00 FF FF 00 00 01 00 03 00 FB FF F9 FF 01 00 FF FF FD FF 00 00 FE FF FA FF FF FF FD FF 01 00 04 00 00
+*/
+
+/* Following the messages that are sent prior and after setting the device
+ * no clue what they are good for - but they don't seem necessary +static int snd_sl_phono_start(struct snd_kcontrol *kcontrol) +{
+ unsigned char buffer[] = {0};
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ return snd_usb_interrupt_trans(mixer->chip->dev,+ usb_sndintpipe(mixer->chip->dev, 0x03),
+ buffer, 1, snd_sl_phono_receive);
+}
+
+static int snd_sl_phono_end(struct snd_kcontrol *kcontrol) +{
+ unsigned char buffer[] = {6};
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ return snd_usb_interrupt_trans(mixer->chip->dev,+ usb_sndintpipe(mixer->chip->dev, 0x03),
+ buffer, 1, snd_sl_phono_receive);
+}
+*/
+
+static int snd_sl_phono_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ int err, changed;
+ const unsigned int bufferSize = 64;
+ unsigned char buffer[bufferSize];
+ unsigned char instructions[] = {7, 0};+
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ int value = ucontrol->value.integer.value[0];
+
+/* USB traffic by serato driver
+line to phono:
+
+OUT 03 Length: 0x01 "00"
+
+IN 83 Length: 0x40 ...
+OUT 03 Length: 0x02 "07 00"
+IN 83 Length: 0x40 "07 00 01 00 04 00 02 00 02 00 05 00 04 00 02 00 05 00 06 00 02 00 01 00 03 00 0E 00 05 00 0E 00 09 00 FF FF 02 00 02 00 05 00 03 00 FA FF 04 00 05 00 07 00 08 00 01 00 02 00 01 00 02 00 01 00" +
+IN 83 Length: 0x40 ...
+OUT 03 Length: 0x01 "06"
+IN 83 Length: 0x40 No answer!?
+
+phono to line:
+OUT 03 Length: 0x01 "00"
+
+IN 83 Length: 0x40 ...
+OUT 03 Length: 0x02 "07 01"
+IN 83 Length: 0x40 "07 FF F9 FF FB FF 01 00 FF FF FE FF F6 FF EF FF F8 FF FD FF FB FF FC FF FA FF 00 00 FA FF F7 FF F5 FF FB FF 01 00 F7 FF F7 FF FC FF F9 FF F9 FF F7 FF F7 FF 00 00 F4 FF FB FF F6 FF F9 FF FA FF" +
+IN 83 Length: 0x40 ...
+OUT 03 Length: 0x01 "06"
+IN 83 Length: 0x40 No answer!?
+*/
+
+ if (value > 1)
+ return -EINVAL;
+
+ changed = (value != ucontrol->value.integer.value[0]);
+
+/* outcommented for now since it works without and don't have a clue what it's good for
+ err = snd_sl_phono_start(kcontrol);
+*/
+
+ err = snd_usb_interrupt_trans(mixer->chip->dev,
+ usb_rcvbulkpipe(mixer->chip->dev, 0x83),
+ buffer, bufferSize, snd_sl_phono_receive);
+
+ /* 07 00 = phone
+ 07 01 = line */
+ instructions[1] = !value;
+
+ err = snd_usb_interrupt_trans(mixer->chip->dev,
+ usb_sndintpipe(mixer->chip->dev, 0x03),
+ instructions, 2, snd_sl_phono_receive);
+
+ if(err < 0)
+ return err;
+
+ err = snd_usb_interrupt_trans(mixer->chip->dev,
+ usb_rcvbulkpipe(mixer->chip->dev, 0x83),
+ buffer, bufferSize, snd_sl_phono_changed);
+
+/* outcommented for now since it works without and don't have a clue what it's good for
+ err = snd_sl_phono_end(kcontrol);
+*/
+
+ if (err < 0)
+ return err;
+
+ kcontrol->private_value = value;
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_sl_controls[] =
+{
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Switch", + .info = snd_sl_phono_info, + .get = snd_sl_phono_get, + .put = snd_sl_phono_put, + .private_value = 1, /*switch is activated*/
+ }
+};
+
+/* gets called multiple times! */
+static int snd_sl_controls_create(struct usb_mixer_interface *mixer) +{
+ int i, err;
+
+ for (i = 0; i < ARRAY_SIZE(snd_sl_controls); ++i) {
+ struct snd_ctl_elem_value ucontrol;
+ struct snd_kcontrol *kcontrol =snd_ctl_new1(&snd_sl_controls[i], mixer);
+
+ /* Since we only need one control and the routine
+ * is called multiple times we have to ignore all
+ * attempts to attach controls multiple times*/
+ if(snd_ctl_find_id(mixer->chip->card, &kcontrol->id))
+ {
+ /* we found the control - it is already present
+ * so just continue*/
+ snd_ctl_free_one(kcontrol);
+ continue;
+ }
+
+ /* add frees the control if on err < 0! */
+ err = snd_ctl_add(mixer->chip->card,
+ kcontrol);
+ if (err < 0)
+ return err;
+
+ /* Phono input is on by default */
+ ucontrol.value.integer.value[0] = 1;
+
+ err = snd_sl_phono_put(kcontrol, &ucontrol);
+
+ if(err < 0)
+ return err; /* the device screwed up */
+ }
+
+ return 0;
+}
+
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif)
{
static struct snd_device_ops dev_ops = {@@ -2043,6 +2270,11 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif)
if ((err = snd_usb_soundblaster_remote_init(mixer)) < 0)
goto _error;
+ if (mixer->chip->usb_id == USB_ID(0x13e5, 0x001)) {
+ if ((err = snd_sl_controls_create(mixer)) < 0)
+ goto _error;
+ }
+
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) {
struct snd_info_entry *entry;sound/usb/usbmixer_maps.c +21 -0
@@ -261,6 +261,22 @@ static struct usbmix_name_map aureon_51_2_map[] = { {}/* terminator */ }; +static struct usbmix_name_map scratch_live_map[] = { +/* 1: IT Line 1 (USB streaming) */ +/* 2: OT Line 1 (Speaker) */ +/* 3: IT Line 1 (Line connector) */ + {4 ,"Line 1 In" },/* FU */ +/* 5: OT Line 1 (USB streaming) */ +/* 6: IT Line 2 (USB streaming) */ +/* 7: OT Line 2 (Speaker) */ +/* 8: IT Line 2 (Line connector) */ + {9 ,"Line 2 In" },/* FU */ +/* 10: OT Line 2 (USB streaming) */ +/* 11: IT Mic (Line connector) */ +/* 12: OT Mic (USB streaming) */ + {0 }/* terminator */ +}; +/* * Control map entries */
@@ -311,6 +327,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x0ccd, 0x0028), .map = aureon_51_2_map, }, + { + .id = USB_ID(0x13e5, 0x0001), + .map = scratch_live_map, + .ignore_ctl_error = 1, + }, { 0 } /* terminator */ };
Re: [PATCH] serato phono patch
At Mon, 12 Jan 2009 20:07:22 +0100,
Quoted 2 lines · LCID Fire
Add serato input phono switch
Thank you for the patch.
Could you give a more detailed patch description?
Also, don't forget to give your sign-off. Otherwise I can't merge it to the upstream for such an amount of patch.
Also, the patch embedded in your post seems broken due to line breaks likely by your MUA. Please fix MUA setting or use an attachment if difficult to fix.
Some quick review comments below...
sound/usb/usbaudio.c static int snd_usb_create_streams(struct · line 2865
Quoted 13 lines
sound/usb/usbaudio.c +1
-1@@ -2859,7 +2859,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)/* find audiocontrol interface */ host_iface = &usb_ifnum_to_if (dev, ctrlif)->altsetting[0 ];if (!(p1 =snd_usb_find_csint_desc (host_iface->extra, host_iface->extralen,NULL ,HEADER ))) { -snd_printk (KERN_ERR "cannot find HEADER\n" ); +snd_printk (KERN_ERR "cannot find HEADER for %d in %s\n" , ctrlif, host_iface->extra);
Is host_iface->extra really NULL-terminated, i.e. safe to use as a string?
sound/usb/usbmixer.c static void snd_audigy2nx_proc_read(struct · line 2016
Quoted 10 lines
sound/usb/usbmixer.c +1
-0@@ -2012,6 +2012,233 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry, } } +void snd_usb_cleanup_interrupt_urb (struct urb * pUrb)
Make it static.
sound/usb/usbmixer.c static void snd_audigy2nx_proc_read(struct · line 2022
Quoted 6 lines
sound/usb/usbmixer.c +6
-0+{ +if (pUrb->transfer_buffer_length >0 ) +kfree (pUrb->transfer_buffer); + +if (pUrb->context) +kfree (pUrb->context);
No need of a NULL-check for kfree.
sound/usb/usbmixer.c static void snd_audigy2nx_proc_read(struct · line 2030
Quoted 8 lines
sound/usb/usbmixer.c +7
-0+ +usb_free_urb (pUrb); +} + +/* Wrapper for setting and submitting the interrupt urb().*/ +int snd_usb_interrupt_trans (struct usb_device *dev,unsigned int pipe,void *data, +__u16 size,usb_complete_t callback)
Make it static.
sound/usb/usbmixer.c static void snd_audigy2nx_proc_read(struct · line 2034
Quoted 4 lines
sound/usb/usbmixer.c +4
-0+{ +int err; +void *buf =NULL ; +struct urb * pUrb =NULL ;
No need to initialize this.
sound/usb/usbmixer.c static void snd_audigy2nx_proc_read(struct · line 2042
Quoted 8 lines
sound/usb/usbmixer.c +8
-0+ +if (size >0 ) { + buf =kmemdup (data, size,GFP_KERNEL ); +if (!buf) +return -ENOMEM ; + } + + pUrb =usb_alloc_urb (1 /*int iso packets*/ ,GFP_KERNEL );
Missing NULL check.
sound/usb/usbmixer.c static void snd_audigy2nx_proc_read(struct · line 2048
Quoted 6 lines
sound/usb/usbmixer.c +6
-0+/*TODO: Remove hardcoded 4*/ +usb_fill_int_urb (pUrb, dev, pipe, buf, size, callback,NULL ,4 ); + + err =usb_submit_urb (pUrb,GFP_KERNEL ); + +return err;
Possible memory leak when error?
Quoted 2 lines
sound/usb/usbmixer.c +1
-0+static int snd_sl_phono_put (struct snd_kcontrol *kcontrol,struct snd_ctl_elem_value *ucontrol)
(snip)
sound/usb/usbmixer.c
Quoted 4 lines
sound/usb/usbmixer.c +4
-0+ + err =snd_usb_interrupt_trans (mixer->chip->dev, +usb_rcvbulkpipe (mixer->chip->dev,0x83 ), + buffer, bufferSize, snd_sl_phono_receive);
No error check?
Also, there are a few coding-style issues. I'd suggest you to run scripts/checkpatch.pl once.
thanks,
Takashi
Re: [PATCH] serato phono patch
Quoted 1 line · Takashi Iwai
Could you give a more detailed patch description?
Yes, I should have splitted them into single patches in the first place. So attached is the first one (including description ;)).
Re: [PATCH] serato phono patch
Quoted 1 line · Takashi Iwai
Could you give a more detailed patch description?
Yes, I should have splitted them into single patches in the first place. So attached is the first one (including description ;)).
commit 00092c5912ba7eb162599686388a2cac5c72c262
Author: LCID Fire <[email protected]> Date: Sat Jan 17 16:47:06 2009 +0100
Ignore errors (wrong usb interface data) found when using the serato scratch live box with alsa Thus the alsa controls can be accessed (beware: they don't work though - but at least it's one ugly error message less)
sound/usb/usbmixer_maps.c +21 -0
@@ -261,6 +261,22 @@ static struct usbmix_name_map aureon_51_2_map[] = { {}/* terminator */ }; +static struct usbmix_name_map scratch_live_map[] = { +/* 1: IT Line 1 (USB streaming) */ +/* 2: OT Line 1 (Speaker) */ +/* 3: IT Line 1 (Line connector) */ + {4 ,"Line 1 In" },/* FU */ +/* 5: OT Line 1 (USB streaming) */ +/* 6: IT Line 2 (USB streaming) */ +/* 7: OT Line 2 (Speaker) */ +/* 8: IT Line 2 (Line connector) */ + {9 ,"Line 2 In" },/* FU */ +/* 10: OT Line 2 (USB streaming) */ +/* 11: IT Mic (Line connector) */ +/* 12: OT Mic (USB streaming) */ + {0 }/* terminator */ +}; +/* * Control map entries */
@@ -311,6 +327,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x0ccd, 0x0028), .map = aureon_51_2_map, }, + { + .id = USB_ID(0x13e5, 0x0001), + .map = scratch_live_map, + .ignore_ctl_error = 1, + }, { 0 } /* terminator */ };
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH 1/1 sscape: fix incorrect timeout after microcode upload
In reply to Takashi IwaiFrom: Krzysztof Helt <[email protected]>
A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks.
---
This is a second version of the patch with while loops changed to do-while ones.
sound/isa/sscape.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-)
sound/isa/sscape.c +12 -12
@@ -393,20 +393,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti*/ static int obp_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +do {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if ((x &0xfe ) ==0xfe )return 1 ; - --timeout; - }/* while */ +msleep (10 ); + }while (time_before (jiffies, end_time));return 0 ; }
@@ -420,20 +420,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)*/ static int host_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +do {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if (x ==0xfe )return 1 ; - --timeout; - }/* while */ +msleep (10 ); + }while (time_before (jiffies, end_time));return 0 ; }
@@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s,* give it 5 seconds (max) ... */ ret =0 ; -if (!obp_startup_ack (s,5 )) { +if (!obp_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: No response from on-board processor after upload\n" ); ret = -EAGAIN ; - }else if (!host_startup_ack (s,5 )) { + }else if (!host_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: SoundScape failed to initialise\n" ); ret = -EAGAIN ; }
Signature · 6 lines
1.5.2.2 ---------------------------------------------------------------------- Speak Up. Angielski szybko i skutecznie. 3 miesiace nauki gratis. Sprawdz. >> http://link.interia.pl/f2019
Takashi Iwai
AppliedAt Mon, 12 Jan 2009 21:25:04 +0100,
Quoted 5 lines · Krzysztof Helt
From: Krzysztof Helt <[email protected]>
A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks.
Thanks, applied now.
(BTW, don't forget a sign-off at each version.)
Takashi
Quoted 84 lines
---
This is a second version of the patch with while loops changed to do-while ones.sound/isa/sscape.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-)sound/isa/sscape.c +12
-12@@ -393,20 +393,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti*/ static int obp_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +do {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if ((x &0xfe ) ==0xfe )return 1 ; - --timeout; - }/* while */ +msleep (10 ); + }while (time_before (jiffies, end_time));return 0 ; }@@ -420,20 +420,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)*/ static int host_startup_ack (struct soundscape *s,unsigned timeout) { -while (timeout !=0 ) { +unsigned long end_time = jiffies +msecs_to_jiffies (timeout); + +do {unsigned long flags;unsigned char x; -schedule_timeout_uninterruptible (1 ); -spin_lock_irqsave (&s->lock, flags); x =inb (HOST_DATA_IO (s->io_base));spin_unlock_irqrestore (&s->lock, flags);if (x ==0xfe )return 1 ; - --timeout; - }/* while */ +msleep (10 ); + }while (time_before (jiffies, end_time));return 0 ; }@@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s,* give it 5 seconds (max) ... */ ret =0 ; -if (!obp_startup_ack (s,5 )) { +if (!obp_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: No response from on-board processor after upload\n" ); ret = -EAGAIN ; - }else if (!host_startup_ack (s,5 )) { + }else if (!host_startup_ack (s,5000 )) {snd_printk (KERN_ERR "sscape: SoundScape failed to initialise\n" ); ret = -EAGAIN ; }Signature · 6 lines
1.5.2.2 ---------------------------------------------------------------------- Speak Up. Angielski szybko i skutecznie. 3 miesiace nauki gratis. Sprawdz. >> http://link.interia.pl/f2019