extend the root vg to an md
When I extend my root vg ( the VG that has the root lv ) to an PV on the md0 device, the system boots into a panic complaining that the UUID of PV on the md device does not exist. But before I extend it, the system boots normally, showing the md0 and its pv is up.
Any advice is greatly appreciate.
Below is my disk configuration before running the vgextend g1volgroup00 /dev/md0
[root@g1 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/xvda2 VG Name g1volgroup00 PV Size 9.90 GB / not usable 6.76 MB Allocatable yes (but full) PE Size (KByte) 8192 Total PE 1266 Free PE 0 Allocated PE 1266 PV UUID H0owWs-k8Li-w0Mb-3CgN-5gsM-haJy-BYYkrh
--- Physical volume ---
PV Name /dev/md0 VG Name g1volgroup00 PV Size 156.19 MB / not usable 4.19 MB Allocatable yes PE Size (KByte) 8192 Total PE 19 Free PE 19 Allocated PE 0 PV UUID 4m2GFx-QDv0-Gb8q-qxAG-QMIc-If9i-b1ge12
[root@g1 ~]# vgdisplay
--- Volume group ---
VG Name g1volgroup00
System ID
Format lvm2 Metadata Areas 2 Metadata Sequence No 5 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 10.04 GB PE Size 8.00 MB Total PE 1285 Alloc PE / Size 1266 / 9.89 GB Free PE / Size 19 / 152.00 MB VG UUID EFxLNW-31H9-lyLD-oprg-UvLB-lVNF-3Qv6zG
Vu