v4l/tvp514x: make the module aware of rich people
PATCH 1/1 v4l/tvp514x: make the module aware of rich people
because they might design two of those chips on a single board. You never know.
--- drivers/media/video/tvp514x.c | 52 +++++++++++++++++++++++----------------- 1 files changed, 30 insertions(+), 22 deletions(-)
drivers/media/video/tvp514x.c +30 -22
@@ -103,7 +103,7 @@ struct tvp514x_std_info {* @route: input and output routing at chip level */ struct tvp514x_decoder { -struct v4l2_int_device *v4l2_int_device; +struct v4l2_int_device v4l2_int_device;const struct tvp514x_platform_data *pdata;struct i2c_client *client;
@@ -1369,17 +1369,14 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module =THIS_MODULE , - .name =TVP514X_MODULE_NAME , - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + .u = { + .slave = &tvp514x_slave, + }, + }, };/**
@@ -1392,18 +1389,26 @@ static struct v4l2_int_device tvp514x_int_device = {static int tvp514x_probe (struct i2c_client *client,const struct i2c_device_id *id) { -struct tvp514x_decoder *decoder = &tvp514x_dev; +struct tvp514x_decoder *decoder;int err;/* Check if the adapter supports the needed features */ if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA ))return -EIO ; - decoder->pdata = client->dev.platform_data; -if (!decoder->pdata) { + decoder =kzalloc (sizeof (*decoder),GFP_KERNEL ); +if (!decoder) +return -ENOMEM ; + +if (!client->dev.platform_data) {v4l_err (client,"No platform data!!\n" ); -return -ENODEV ; + err = -ENODEV ; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data;/* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one
@@ -1419,23 +1424,26 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)*/ decoder->id = (struct i2c_device_id *)id;/* Attach to Master */ -strcpy (tvp514x_int_device.u.slave->attach_to, decoder->pdata->master); - decoder->v4l2_int_device = &tvp514x_int_device; +strcpy (decoder->v4l2_int_device.u.slave->attach_to, decoder->pdata->master); decoder->client = client;i2c_set_clientdata (client, decoder);/* Register with V4L2 layer as slave device */ - err =v4l2_int_device_register (decoder->v4l2_int_device); + err =v4l2_int_device_register (&decoder->v4l2_int_device);if (err) {i2c_set_clientdata (client,NULL );v4l_err (client,"Unable to register to v4l2. Err[%d]\n" , err); + goto out_free; }else v4l_info (client,"Registered to v4l2 master %s!!\n" , decoder->pdata->master); -return 0 ; + +out_free: +kfree (decoder); +return err; }/**
@@ -1452,9 +1460,9 @@ static int __exit tvp514x_remove(struct i2c_client *client)if (!client->adapter)return -ENODEV ;/* our client isn't attached */ -v4l2_int_device_unregister (decoder->v4l2_int_device); +v4l2_int_device_unregister (&decoder->v4l2_int_device);i2c_set_clientdata (client,NULL ); - +kfree (decoder);return 0 ; }/*
Signature · 1 line
1.5.6.5
Thanks,
Vaibhav Hiremath
Quoted 11 lines
-----Original Message-----
From: Sebastian Andrzej Siewior [mailto:[email protected]]
Sent: Monday, January 12, 2009 11:55 PM
To: Hiremath, Vaibhav
Cc: [email protected]; Mauro Carvalho Chehab; video4linux- [email protected]
Subject: [PATCH] v4l/tvp514x: make the module aware of rich peoplebecause they might design two of those chips on a single board. You never know.
[Hiremath, Vaibhav] Thanks, it was in my todo list. I will verify this patch tomorrow and let you know.
Quoted 131 lines
Signed-off-by Sebastian Andrzej Siewior <[email protected]>--- drivers/media/video/tvp514x.c | 52 +++++++++++++++++++++++------- ---------- 1 files changed, 30 insertions(+), 22 deletions(-)drivers/media/video/tvp514x.c +9
-12@@ -103,7 +103,7 @@ struct tvp514x_std_info {* @route: input and output routing at chip level */ struct tvp514x_decoder { -struct v4l2_int_device *v4l2_int_device; +struct v4l2_int_device v4l2_int_device;const struct tvp514x_platform_data *pdata;struct i2c_client *client;@@ -1369,17 +1369,14 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module =THIS_MODULE , - .name =TVP514X_MODULE_NAME , - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + .u = { + .slave = &tvp514x_slave, + }, + }, };/**
drivers/media/video/tvp514x.c +12
-4@@ -1392,18 +1389,26 @@ static struct v4l2_int_device tvp514x_int_device = {static int tvp514x_probe (struct i2c_client *client,const struct i2c_device_id *id) { -struct tvp514x_decoder *decoder = &tvp514x_dev; +struct tvp514x_decoder *decoder;int err;/* Check if the adapter supports the needed features */ if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA ))return -EIO ; - decoder->pdata = client->dev.platform_data; -if (!decoder->pdata) { + decoder =kzalloc (sizeof (*decoder),GFP_KERNEL ); +if (!decoder) +return -ENOMEM ; + +if (!client->dev.platform_data) {v4l_err (client,"No platform data!!\n" ); -return -ENODEV ; + err = -ENODEV ; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data;drivers/media/video/tvp514x.c +7
-4/* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one @@ -1419,23 +1424,26 @@ tvp514x_probe(struct i2c_client *client,const struct i2c_device_id *id) */ decoder->id = (struct i2c_device_id *)id;/* Attach to Master */ -strcpy (tvp514x_int_device.u.slave->attach_to, decoder->pdata- >master); - decoder->v4l2_int_device = &tvp514x_int_device; +strcpy (decoder->v4l2_int_device.u.slave->attach_to, decoder- >pdata->master); decoder->client = client;i2c_set_clientdata (client, decoder);/* Register with V4L2 layer as slave device */ - err =v4l2_int_device_register (decoder->v4l2_int_device); + err =v4l2_int_device_register (&decoder->v4l2_int_device);if (err) {i2c_set_clientdata (client,NULL );v4l_err (client,"Unable to register to v4l2. Err[%d]\n" , err); + goto out_free; }else v4l_info (client,"Registered to v4l2 master %s!!\n" , decoder->pdata->master); -return 0 ; + +out_free: +kfree (decoder); +return err;}
/**
drivers/media/video/tvp514x.c +2
-2@@ -1452,9 +1460,9 @@ static int __exit tvp514x_remove(struct i2c_client *client)if (!client->adapter)return -ENODEV ;/* our client isn't attached */ -v4l2_int_device_unregister (decoder->v4l2_int_device); +v4l2_int_device_unregister (&decoder->v4l2_int_device);i2c_set_clientdata (client,NULL ); - +kfree (decoder);return 0 ; }/*
--
1.5.6.5
Quoted 11 lines · Vaibhav
Thanks,
Vaibhav HiremathQuoted 8 lines
-----Original Message-----
From: Sebastian Andrzej Siewior [mailto:[email protected]]
Sent: Monday, January 12, 2009 11:55 PM
To: Hiremath, Vaibhav
Cc: [email protected]; Mauro Carvalho Chehab; video4linux- [email protected]
Subject: [PATCH] v4l/tvp514x: make the module aware of rich people
Quoted 4 lines
Quoted 3 lines
because they might design two of those chips on a single board. You never know.
[Hiremath, Vaibhav] Thanks, it was in my todo list. I will verify this patch tomorrow and let you know.
ping
Sebastian
PATCH v2 1/1 v4l/tvp514x: make the module aware of rich people
In reply to Hiremath, Vaibhavbecause they might design two of those chips on a single board. You never know.
---
v2: Make the content of the registers (brightness, \ldots) per decoder
and not global.
v1: Initial version
drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++------------------- 1 files changed, 90 insertions(+), 76 deletions(-)
drivers/media/video/tvp514x.c +90 -76
@@ -86,45 +86,8 @@ struct tvp514x_std_info {struct v4l2_standard standard; }; -/** -* struct tvp514x_decoded - TVP5146/47 decoder object -* @v4l2_int_device: Slave handle -* @pdata: Board specific -* @client: I2C client data -* @id: Entry from I2C table -* @ver: Chip version -* @state: TVP5146/47 decoder state - detected or not-detected -* @pix: Current pixel format -* @num_fmts: Number of formats -* @fmt_list: Format list -* @current_std: Current standard -* @num_stds: Number of standards -* @std_list: Standards list -* @route: input and output routing at chip level -*/ -struct tvp514x_decoder { -struct v4l2_int_device *v4l2_int_device; -const struct tvp514x_platform_data *pdata; -struct i2c_client *client; - -struct i2c_device_id *id; - -int ver; -enum tvp514x_state state; - -struct v4l2_pix_format pix; -int num_fmts; -const struct v4l2_fmtdesc *fmt_list; - -enum tvp514x_std current_std; -int num_stds; -struct tvp514x_std_info *std_list; - -struct v4l2_routing route; -}; -/* TVP514x default register values */ -static struct tvp514x_reg tvp514x_reg_list[] = { +static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE ,REG_INPUT_SEL ,0x05 },/* Composite selected */ {TOK_WRITE ,REG_AFE_GAIN_CTRL ,0x0F }, {TOK_WRITE ,REG_VIDEO_STD ,0x00 },/* Auto mode */
@@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] = { {TOK_TERM, 0, 0}, }; +/** +* struct tvp514x_decoded - TVP5146/47 decoder object +* @v4l2_int_device: Slave handle +* @pdata: Board specific +* @client: I2C client data +* @id: Entry from I2C table +* @ver: Chip version +* @state: TVP5146/47 decoder state - detected or not-detected +* @pix: Current pixel format +* @num_fmts: Number of formats +* @fmt_list: Format list +* @current_std: Current standard +* @num_stds: Number of standards +* @std_list: Standards list +* @route: input and output routing at chip level +*/ +struct tvp514x_decoder { +struct v4l2_int_device v4l2_int_device; +const struct tvp514x_platform_data *pdata; +struct i2c_client *client; + +struct i2c_device_id *id; + +int ver; +enum tvp514x_state state; + +struct v4l2_pix_format pix; +int num_fmts; +const struct v4l2_fmtdesc *fmt_list; + +enum tvp514x_std current_std; +int num_stds; +struct tvp514x_std_info *std_list; + +struct v4l2_routing route; +struct tvp514x_reg tvp514x_regs[ARRAY_SIZE (tvp514x_reg_list_default)]; +}; +/* List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be * extended to 10/20 bit mode.
@@ -422,7 +423,7 @@ static int tvp514x_configure(struct tvp514x_decoder *decoder)/* common register initialization */ err = -tvp514x_write_regs (decoder->client, tvp514x_reg_list); +tvp514x_write_regs (decoder->client, decoder->tvp514x_regs);if (err)return err;
@@ -580,7 +581,7 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id)return err; decoder->current_std = i; - tvp514x_reg_list[REG_VIDEO_STD ].val = decoder->std_list[i].video_std; + decoder->tvp514x_regs[REG_VIDEO_STD ].val = decoder->std_list[i].video_std;v4l_dbg (1 , debug, decoder->client,"Standard set to: %s" , decoder->std_list[i].standard.name);
@@ -625,8 +626,8 @@ static int ioctl_s_routing(struct v4l2_int_device *s,if (err)return err; - tvp514x_reg_list[REG_INPUT_SEL ].val = input_sel; - tvp514x_reg_list[REG_OUTPUT_FORMATTER1 ].val = output_sel; + decoder->tvp514x_regs[REG_INPUT_SEL ].val = input_sel; + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1 ].val = output_sel;/* Clear status */ msleep (LOCK_RETRY_DELAY );
@@ -779,16 +780,16 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)switch (ctrl->id) {case V4L2_CID_BRIGHTNESS : - ctrl->value = tvp514x_reg_list[REG_BRIGHTNESS ].val; + ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS ].val;break ;case V4L2_CID_CONTRAST : - ctrl->value = tvp514x_reg_list[REG_CONTRAST ].val; + ctrl->value = decoder->tvp514x_regs[REG_CONTRAST ].val;break ;case V4L2_CID_SATURATION : - ctrl->value = tvp514x_reg_list[REG_SATURATION ].val; + ctrl->value = decoder->tvp514x_regs[REG_SATURATION ].val;break ;case V4L2_CID_HUE : - ctrl->value = tvp514x_reg_list[REG_HUE ].val; + ctrl->value = decoder->tvp514x_regs[REG_HUE ].val;if (ctrl->value ==0x7F ) ctrl->value =180 ;else if (ctrl->value ==0x80 )
@@ -798,7 +799,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)break ;case V4L2_CID_AUTOGAIN : - ctrl->value = tvp514x_reg_list[REG_AFE_GAIN_CTRL ].val; + ctrl->value = decoder->tvp514x_regs[REG_AFE_GAIN_CTRL ].val;if ((ctrl->value &0x3 ) ==3 ) ctrl->value =1 ;else
@@ -848,7 +849,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_BRIGHTNESS ].val = value; + decoder->tvp514x_regs[REG_BRIGHTNESS ].val = value;break ;case V4L2_CID_CONTRAST :if (ctrl->value <0 || ctrl->value >255 ) {
@@ -861,7 +862,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_CONTRAST ].val = value; + decoder->tvp514x_regs[REG_CONTRAST ].val = value;break ;case V4L2_CID_SATURATION :if (ctrl->value <0 || ctrl->value >255 ) {
@@ -874,7 +875,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_SATURATION ].val = value; + decoder->tvp514x_regs[REG_SATURATION ].val = value;break ;case V4L2_CID_HUE :if (value ==180 )
@@ -893,7 +894,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_HUE ].val = value; + decoder->tvp514x_regs[REG_HUE ].val = value;break ;case V4L2_CID_AUTOGAIN :if (value ==1 )
@@ -910,7 +911,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_AFE_GAIN_CTRL ].val = value; + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL ].val = value;break ;default : v4l_err(decoder->client,
@@ -1275,7 +1276,7 @@ static int ioctl_init(struct v4l2_int_device *s)struct tvp514x_decoder *decoder = s->priv;/* Set default standard to auto */ - tvp514x_reg_list[REG_VIDEO_STD ].val = + decoder->tvp514x_regs[REG_VIDEO_STD ].val =VIDEO_STD_AUTO_SWITCH_BIT ;return tvp514x_configure (decoder);
@@ -1369,17 +1370,14 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module =THIS_MODULE , - .name =TVP514X_MODULE_NAME , - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + .u = { + .slave = &tvp514x_slave, + }, + }, };/**
@@ -1392,26 +1390,39 @@ static struct v4l2_int_device tvp514x_int_device = {static int tvp514x_probe (struct i2c_client *client,const struct i2c_device_id *id) { -struct tvp514x_decoder *decoder = &tvp514x_dev; +struct tvp514x_decoder *decoder;int err;/* Check if the adapter supports the needed features */ if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA ))return -EIO ; - decoder->pdata = client->dev.platform_data; -if (!decoder->pdata) { + decoder =kzalloc (sizeof (*decoder),GFP_KERNEL ); +if (!decoder) +return -ENOMEM ; + +if (!client->dev.platform_data) {v4l_err (client,"No platform data!!\n" ); -return -ENODEV ; + err = -ENODEV ; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; + +BUILD_BUG_ON (sizeof (decoder->tvp514x_regs) != +sizeof (tvp514x_reg_list_default)); +memcpy (decoder->tvp514x_regs, tvp514x_reg_list_default, +sizeof (tvp514x_reg_list_default));/* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one * time configuration, no need to preserve. */ - tvp514x_reg_list[REG_OUTPUT_FORMATTER2 ].val |= + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2 ].val |= (decoder->pdata->clk_polarity <<1 ); - tvp514x_reg_list[REG_SYNC_CONTROL ].val |= + decoder->tvp514x_regs[REG_SYNC_CONTROL ].val |= ((decoder->pdata->hs_polarity <<2 ) | (decoder->pdata->vs_polarity <<3 ));/*
@@ -1419,23 +1430,26 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)*/ decoder->id = (struct i2c_device_id *)id;/* Attach to Master */ -strcpy (tvp514x_int_device.u.slave->attach_to, decoder->pdata->master); - decoder->v4l2_int_device = &tvp514x_int_device; +strcpy (decoder->v4l2_int_device.u.slave->attach_to, decoder->pdata->master); decoder->client = client;i2c_set_clientdata (client, decoder);/* Register with V4L2 layer as slave device */ - err =v4l2_int_device_register (decoder->v4l2_int_device); + err =v4l2_int_device_register (&decoder->v4l2_int_device);if (err) {i2c_set_clientdata (client,NULL );v4l_err (client,"Unable to register to v4l2. Err[%d]\n" , err); + goto out_free; }else v4l_info (client,"Registered to v4l2 master %s!!\n" , decoder->pdata->master); -return 0 ; + +out_free: +kfree (decoder); +return err; }/**
@@ -1452,9 +1466,9 @@ static int __exit tvp514x_remove(struct i2c_client *client)if (!client->adapter)return -ENODEV ;/* our client isn't attached */ -v4l2_int_device_unregister (decoder->v4l2_int_device); +v4l2_int_device_unregister (&decoder->v4l2_int_device);i2c_set_clientdata (client,NULL ); - +kfree (decoder);return 0 ; }/*
Signature · 1 line
1.5.6.5
Thanks,
Vaibhav Hiremath
Quoted 10 lines
-----Original Message-----
From: [email protected] [mailto:linux-media- [email protected]] On Behalf Of Sebastian Andrzej Siewior
Sent: Wednesday, January 28, 2009 9:00 PM
To: Hiremath, Vaibhav
Cc: [email protected]; Mauro Carvalho Chehab; video4linux- [email protected]
Subject: [PATCH v2] v4l/tvp514x: make the module aware of rich people
Quoted 3 lines
because they might design two of those chips on a single board. You never know.
[Hiremath, Vaibhav] I am really sorry; actually I was really busy with our internal release process and still going. Definitely I will try to find some time tomorrow to test this patch.
Quoted 7 lines
Signed-off-by Sebastian Andrzej Siewior <[email protected]>---
v2: Make the content of the registers (brightness, \ldots) per decoder
and not global.
v1: Initial version
[Hiremath, Vaibhav] Just for knowledge, how are you validating these changes? On which board are you testing/validating?
Quoted 40 lines
drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++-------- ----------- 1 files changed, 90 insertions(+), 76 deletions(-)drivers/media/video/tvp514x.c +0
-27@@ -86,45 +86,8 @@ struct tvp514x_std_info {struct v4l2_standard standard; }; -/** -* struct tvp514x_decoded - TVP5146/47 decoder object -* @v4l2_int_device: Slave handle -* @pdata: Board specific -* @client: I2C client data -* @id: Entry from I2C table -* @ver: Chip version -* @state: TVP5146/47 decoder state - detected or not-detected -* @pix: Current pixel format -* @num_fmts: Number of formats -* @fmt_list: Format list -* @current_std: Current standard -* @num_stds: Number of standards -* @std_list: Standards list -* @route: input and output routing at chip level -*/ -struct tvp514x_decoder { -struct v4l2_int_device *v4l2_int_device; -const struct tvp514x_platform_data *pdata; -struct i2c_client *client; - -struct i2c_device_id *id; - -int ver; -enum tvp514x_state state; - -struct v4l2_pix_format pix;
drivers/media/video/tvp514x.c struct tvp514x_std_info { · line 125
Quoted 10 lines
drivers/media/video/tvp514x.c +0
-10-int num_fmts; -const struct v4l2_fmtdesc *fmt_list; - -enum tvp514x_std current_std; -int num_stds; -struct tvp514x_std_info *std_list; - -struct v4l2_routing route; -}; -
[Hiremath, Vaibhav] You may want to revisit this change, since there is only one line addition to the struct "struct tvp514x_reg". Patch will look clean if it only indicates the changes.
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[] = · line 154
Quoted 13 lines
drivers/media/video/tvp514x.c +3
-1/* TVP514x default register values */ -static struct tvp514x_reg tvp514x_reg_list[] = { +static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE ,REG_INPUT_SEL ,0x05 },/* Composite selected */ {TOK_WRITE ,REG_AFE_GAIN_CTRL ,0x0F }, {TOK_WRITE ,REG_VIDEO_STD ,0x00 },/* Auto mode */ @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] = { {TOK_TERM, 0, 0}, }; +/** + * struct tvp514x_decoded - TVP5146/47 decoder object
[Hiremath, Vaibhav] Please correct the spelling mistake "tvp514x_decoder", I had missed this in my original patch.
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[] = { · line 166
Quoted 13 lines
drivers/media/video/tvp514x.c +13
-0+* @v4l2_int_device: Slave handle +* @pdata: Board specific +* @client: I2C client data +* @id: Entry from I2C table +* @ver: Chip version +* @state: TVP5146/47 decoder state - detected or not-detected +* @pix: Current pixel format +* @num_fmts: Number of formats +* @fmt_list: Format list +* @current_std: Current standard +* @num_stds: Number of standards +* @std_list: Standards list +* @route: input and output routing at chip level
[Hiremath, Vaibhav] You may want to add the new parameter added to this struct.
Quoted 206 lines
drivers/media/video/tvp514x.c +23
-0+*/ +struct tvp514x_decoder { +struct v4l2_int_device v4l2_int_device; +const struct tvp514x_platform_data *pdata; +struct i2c_client *client; + +struct i2c_device_id *id; + +int ver; +enum tvp514x_state state; + +struct v4l2_pix_format pix; +int num_fmts; +const struct v4l2_fmtdesc *fmt_list; + +enum tvp514x_std current_std; +int num_stds; +struct tvp514x_std_info *std_list; + +struct v4l2_routing route; +struct tvp514x_reg tvp514x_regs[ARRAY_SIZE (tvp514x_reg_list_default)]; +}; +/* List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be
* extended to 10/20 bit mode.drivers/media/video/tvp514x.c +1
-1@@ -422,7 +423,7 @@ static int tvp514x_configure(struct tvp514x_decoder *decoder)/* common register initialization */ err = -tvp514x_write_regs (decoder->client, tvp514x_reg_list); +tvp514x_write_regs (decoder->client, decoder- >tvp514x_regs);if (err)drivers/media/video/tvp514x.c +1
-1return err;@@ -580,7 +581,7 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id)return err; decoder->current_std = i; - tvp514x_reg_list[REG_VIDEO_STD ].val = decoder- >std_list[i].video_std; + decoder->tvp514x_regs[REG_VIDEO_STD ].val = decoder- >std_list[i].video_std;drivers/media/video/tvp514x.c +2
-2v4l_dbg (1 , debug, decoder->client,"Standard set to: %s" , decoder->std_list[i].standard.name);@@ -625,8 +626,8 @@ static int ioctl_s_routing(struct v4l2_int_device *s, if (err) return err; - tvp514x_reg_list[REG_INPUT_SEL ].val = input_sel; - tvp514x_reg_list[REG_OUTPUT_FORMATTER1 ].val = output_sel; + decoder->tvp514x_regs[REG_INPUT_SEL ].val = input_sel; + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1 ].val = output_sel;/* Clear status */ drivers/media/video/tvp514x.c +4
-4msleep (LOCK_RETRY_DELAY );@@ -779,16 +780,16 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)switch (ctrl->id) {case V4L2_CID_BRIGHTNESS : - ctrl->value = tvp514x_reg_list[REG_BRIGHTNESS ].val; + ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS ].val;break ;case V4L2_CID_CONTRAST : - ctrl->value = tvp514x_reg_list[REG_CONTRAST ].val; + ctrl->value = decoder->tvp514x_regs[REG_CONTRAST ].val;break ;case V4L2_CID_SATURATION : - ctrl->value = tvp514x_reg_list[REG_SATURATION ].val; + ctrl->value = decoder->tvp514x_regs[REG_SATURATION ].val;break ;case V4L2_CID_HUE : - ctrl->value = tvp514x_reg_list[REG_HUE ].val; + ctrl->value = decoder->tvp514x_regs[REG_HUE ].val;if (ctrl->value ==0x7F ) ctrl->value =180 ;drivers/media/video/tvp514x.c +1
-1else if (ctrl->value ==0x80 )@@ -798,7 +799,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) break;case V4L2_CID_AUTOGAIN : - ctrl->value = tvp514x_reg_list[REG_AFE_GAIN_CTRL ].val; + ctrl->value = decoder- >tvp514x_regs[REG_AFE_GAIN_CTRL].val;if ((ctrl->value &0x3 ) ==3 )drivers/media/video/tvp514x.c +1
-1ctrl->value =1 ; else@@ -848,7 +849,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_BRIGHTNESS ].val = value; + decoder->tvp514x_regs[REG_BRIGHTNESS ].val = value;break ;case V4L2_CID_CONTRAST :drivers/media/video/tvp514x.c +1
-1if (ctrl->value <0 || ctrl->value >255 ) {@@ -861,7 +862,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_CONTRAST ].val = value; + decoder->tvp514x_regs[REG_CONTRAST ].val = value;break ;case V4L2_CID_SATURATION :drivers/media/video/tvp514x.c +1
-1if (ctrl->value <0 || ctrl->value >255 ) {@@ -874,7 +875,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_SATURATION ].val = value; + decoder->tvp514x_regs[REG_SATURATION ].val = value;break ;case V4L2_CID_HUE :drivers/media/video/tvp514x.c +1
-1if (value ==180 )@@ -893,7 +894,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_HUE ].val = value; + decoder->tvp514x_regs[REG_HUE ].val = value;break ;case V4L2_CID_AUTOGAIN :drivers/media/video/tvp514x.c +1
-1if (value ==1 )@@ -910,7 +911,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value);if (err)return err; - tvp514x_reg_list[REG_AFE_GAIN_CTRL ].val = value; + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL ].val = value;break ;default :drivers/media/video/tvp514x.c +1
-1v4l_err(decoder->client,@@ -1275,7 +1276,7 @@ static int ioctl_init(struct v4l2_int_device *s)struct tvp514x_decoder *decoder = s->priv;/* Set default standard to auto */ - tvp514x_reg_list[REG_VIDEO_STD ].val = + decoder->tvp514x_regs[REG_VIDEO_STD ].val =VIDEO_STD_AUTO_SWITCH_BIT ;drivers/media/video/tvp514x.c +8
-11return tvp514x_configure (decoder);@@ -1369,17 +1370,14 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module =THIS_MODULE , - .name =TVP514X_MODULE_NAME , - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + .u = { + .slave = &tvp514x_slave, + }, + }, };/**
drivers/media/video/tvp514x.c +6
-4@@ -1392,26 +1390,39 @@ static struct v4l2_int_device tvp514x_int_device = {static int tvp514x_probe (struct i2c_client *client,const struct i2c_device_id *id) { -struct tvp514x_decoder *decoder = &tvp514x_dev; +struct tvp514x_decoder *decoder;int err;/* Check if the adapter supports the needed features */ if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA ))return -EIO ; - decoder->pdata = client->dev.platform_data; -if (!decoder->pdata) { + decoder =kzalloc (sizeof (*decoder),GFP_KERNEL ); +if (!decoder) +return -ENOMEM ; + +if (!client->dev.platform_data) {v4l_err (client,"No platform data!!\n" ); -return -ENODEV ;
drivers/media/video/tvp514x.c static struct v4l2_int_device · line 1418
Quoted 10 lines
drivers/media/video/tvp514x.c +9
-0+ err = -ENODEV ; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; + +BUILD_BUG_ON (sizeof (decoder->tvp514x_regs) != +sizeof (tvp514x_reg_list_default));
[Hiremath, Vaibhav] Do we really need to check this? I think you are defining the decoder->tvp514x_regs[sizeof(tvp514x_reg_list_default)].
Quoted 70 lines
drivers/media/video/tvp514x.c +4
-2+memcpy (decoder->tvp514x_regs, tvp514x_reg_list_default, +sizeof (tvp514x_reg_list_default));/* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one * time configuration, no need to preserve. */ - tvp514x_reg_list[REG_OUTPUT_FORMATTER2 ].val |= + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2 ].val |= (decoder->pdata->clk_polarity <<1 ); - tvp514x_reg_list[REG_SYNC_CONTROL].val |= + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |=drivers/media/video/tvp514x.c +7
-4((decoder->pdata->hs_polarity <<2 ) | (decoder->pdata->vs_polarity <<3 ));/* @@ -1419,23 +1430,26 @@ tvp514x_probe(struct i2c_client *client,const struct i2c_device_id *id) */ decoder->id = (struct i2c_device_id *)id;/* Attach to Master */ -strcpy (tvp514x_int_device.u.slave->attach_to, decoder->pdata- >master); - decoder->v4l2_int_device = &tvp514x_int_device; +strcpy (decoder->v4l2_int_device.u.slave->attach_to, decoder- >pdata->master); decoder->client = client;i2c_set_clientdata (client, decoder);/* Register with V4L2 layer as slave device */ - err =v4l2_int_device_register (decoder->v4l2_int_device); + err =v4l2_int_device_register (&decoder->v4l2_int_device);if (err) {i2c_set_clientdata (client,NULL );v4l_err (client,"Unable to register to v4l2. Err[%d]\n" , err); + goto out_free; }else v4l_info (client,"Registered to v4l2 master %s!!\n" , decoder->pdata->master); -return 0 ; + +out_free: +kfree (decoder); +return err;}
/**
drivers/media/video/tvp514x.c +2
-2@@ -1452,9 +1466,9 @@ static int __exit tvp514x_remove(struct i2c_client *client)if (!client->adapter)return -ENODEV ;/* our client isn't attached */ -v4l2_int_device_unregister (decoder->v4l2_int_device); +v4l2_int_device_unregister (&decoder->v4l2_int_device);i2c_set_clientdata (client,NULL ); - +kfree (decoder);return 0 ; }/*
--
1.5.6.5--
To unsubscribe from this list: send the line "unsubscribe linux- media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 2 lines · Vaibhav
[Hiremath, Vaibhav] I am really sorry; actually I was really busy with our internal release process and still going. Definitely I will try to find some time tomorrow to test this patch.
No problem.
Quoted 6 lines
Quoted 5 lines
v2: Make the content of the registers (brightness, \ldots) per decoder
and not global.
v1: Initial version[Hiremath, Vaibhav] Just for knowledge, how are you validating these changes? On which board are you testing/validating?
This is custom design. My HW vendor was using advXXXX chips in the past but was not very happy with them and switch over to this chip.
Quoted 44 lines
Quoted 44 lines
drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++-------- ----------- 1 files changed, 90 insertions(+), 76 deletions(-)drivers/media/video/tvp514x.c +0
-31@@ -86,45 +86,8 @@ struct tvp514x_std_info {struct v4l2_standard standard; }; -/** -* struct tvp514x_decoded - TVP5146/47 decoder object -* @v4l2_int_device: Slave handle -* @pdata: Board specific -* @client: I2C client data -* @id: Entry from I2C table -* @ver: Chip version -* @state: TVP5146/47 decoder state - detected or not-detected -* @pix: Current pixel format -* @num_fmts: Number of formats -* @fmt_list: Format list -* @current_std: Current standard -* @num_stds: Number of standards -* @std_list: Standards list -* @route: input and output routing at chip level -*/ -struct tvp514x_decoder { -struct v4l2_int_device *v4l2_int_device; -const struct tvp514x_platform_data *pdata; -struct i2c_client *client; - -struct i2c_device_id *id; - -int ver; -enum tvp514x_state state; - -struct v4l2_pix_format pix; -int num_fmts; -const struct v4l2_fmtdesc *fmt_list; - -enum tvp514x_std current_std;
Quoted 8 lines
drivers/media/video/tvp514x.c struct tvp514x_std_info { · line 125
Quoted 6 lines
drivers/media/video/tvp514x.c +0
-6-int num_stds; -struct tvp514x_std_info *std_list; - -struct v4l2_routing route; -}; -[Hiremath, Vaibhav] You may want to revisit this change, since there is only one line addition to the struct "struct
tvp514x_reg". Patch will look clean if it only indicates the changes.
I'm adding also
| + struct tvp514x_reg
| tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
which contains vp514x_reg_list_default which is defined below. I prefered not to do a forward declration of tvp514x_reg_list_default and therefore I moved tvp514x_decoder just after it. Would you prefer it with a forward declarion?
Quoted 11 lines
Quoted 11 lines
drivers/media/video/tvp514x.c +1
-1/* TVP514x default register values */ -static struct tvp514x_reg tvp514x_reg_list[] = { +static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE ,REG_INPUT_SEL ,0x05 },/* Composite selected */ {TOK_WRITE ,REG_AFE_GAIN_CTRL ,0x0F }, {TOK_WRITE ,REG_VIDEO_STD ,0x00 },/* Auto mode */ @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] = { {TOK_TERM, 0, 0}, };
Quoted 4 lines
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[] = { · line 153
Quoted 2 lines
drivers/media/video/tvp514x.c +2
-0+/** +* struct tvp514x_decoded - TVP5146/47 decoder object [Hiremath, Vaibhav] Please correct the spelling mistake "
tvp514x_decoder", I had missed this in my original patch.
okay.
Quoted 13 lines
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[] = { · line 166
Quoted 13 lines
drivers/media/video/tvp514x.c +13
-0+* @v4l2_int_device: Slave handle +* @pdata: Board specific +* @client: I2C client data +* @id: Entry from I2C table +* @ver: Chip version +* @state: TVP5146/47 decoder state - detected or not-detected +* @pix: Current pixel format +* @num_fmts: Number of formats +* @fmt_list: Format list +* @current_std: Current standard +* @num_stds: Number of standards +* @std_list: Standards list +* @route: input and output routing at chip level
Quoted 1 line
[Hiremath, Vaibhav] You may want to add the new parameter added to this struct.
good point.
Quoted 55 lines
Quoted 55 lines
drivers/media/video/tvp514x.c +23
-0+*/ +struct tvp514x_decoder { +struct v4l2_int_device v4l2_int_device; +const struct tvp514x_platform_data *pdata; +struct i2c_client *client; + +struct i2c_device_id *id; + +int ver; +enum tvp514x_state state; + +struct v4l2_pix_format pix; +int num_fmts; +const struct v4l2_fmtdesc *fmt_list; + +enum tvp514x_std current_std; +int num_stds; +struct tvp514x_std_info *std_list; + +struct v4l2_routing route; +struct tvp514x_reg tvp514x_regs[ARRAY_SIZE (tvp514x_reg_list_default)]; +}; +/* List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be
* extended to 10/20 bit mode.drivers/media/video/tvp514x.c +8
-4@@ -1392,26 +1390,39 @@ static struct v4l2_int_device tvp514x_int_device = {static int tvp514x_probe (struct i2c_client *client,const struct i2c_device_id *id) { -struct tvp514x_decoder *decoder = &tvp514x_dev; +struct tvp514x_decoder *decoder;int err;/* Check if the adapter supports the needed features */ if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA ))return -EIO ; - decoder->pdata = client->dev.platform_data; -if (!decoder->pdata) { + decoder =kzalloc (sizeof (*decoder),GFP_KERNEL ); +if (!decoder) +return -ENOMEM ; + +if (!client->dev.platform_data) {v4l_err (client,"No platform data!!\n" ); -return -ENODEV ; + err = -ENODEV ; + goto out_free; }
Quoted 8 lines
drivers/media/video/tvp514x.c static struct v4l2_int_device tvp514x_int_device = { · line 1415
Quoted 7 lines
drivers/media/video/tvp514x.c +7
-0+ + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; + +BUILD_BUG_ON (sizeof (decoder->tvp514x_regs) != +sizeof (tvp514x_reg_list_default));[Hiremath, Vaibhav] Do we really need to check this? I think you are defining the decoder->tvp514x_regs[sizeof(tvp514x_reg_list_default)].
I can get rid of it if you want. It is just a sanity check.
Quoted 2 lines
Quoted 2 lines
drivers/media/video/tvp514x.c +2
-0+memcpy (decoder->tvp514x_regs, tvp514x_reg_list_default, +sizeof (tvp514x_reg_list_default));
Thanks,
Vaibhav Hiremath
Quoted 80 lines
-----Original Message-----
From: Sebastian Andrzej Siewior [mailto:[email protected]]
Sent: Wednesday, January 28, 2009 9:52 PM
To: Hiremath, Vaibhav
Cc: [email protected]; Mauro Carvalho Chehab; video4linux- [email protected]
Subject: Re: [PATCH v2] v4l/tvp514x: make the module aware of rich peopleQuoted 1 line · Vaibhav
[Hiremath, Vaibhav] I am really sorry; actually I was really busy
with our internal release process and still going.
Quoted 1 line
Definitely I will try to find some time tomorrow to test this
patch.
No problem.Quoted 6 lines
Quoted 5 lines
v2: Make the content of the registers (brightness, \ldots) per decoder
and not global.
v1: Initial version[Hiremath, Vaibhav] Just for knowledge, how are you validating
these changes? On which board are you testing/validating? This is custom design. My HW vendor was using advXXXX chips in the past
but was not very happy with them and switch over to this chip.Quoted 1 line
Quoted 1 line
drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++--------
Quoted 43 lines
Quoted 43 lines
-----------
1 files changed, 90 insertions(+), 76 deletions(-)drivers/media/video/tvp514x.c +0
-31@@ -86,45 +86,8 @@ struct tvp514x_std_info {struct v4l2_standard standard; }; -/** -* struct tvp514x_decoded - TVP5146/47 decoder object -* @v4l2_int_device: Slave handle -* @pdata: Board specific -* @client: I2C client data -* @id: Entry from I2C table -* @ver: Chip version -* @state: TVP5146/47 decoder state - detected or not-detected -* @pix: Current pixel format -* @num_fmts: Number of formats -* @fmt_list: Format list -* @current_std: Current standard -* @num_stds: Number of standards -* @std_list: Standards list -* @route: input and output routing at chip level -*/ -struct tvp514x_decoder { -struct v4l2_int_device *v4l2_int_device; -const struct tvp514x_platform_data *pdata; -struct i2c_client *client; - -struct i2c_device_id *id; - -int ver; -enum tvp514x_state state; - -struct v4l2_pix_format pix; -int num_fmts; -const struct v4l2_fmtdesc *fmt_list; - -enum tvp514x_std current_std;Quoted 8 lines
drivers/media/video/tvp514x.c struct tvp514x_std_info { · line 125
Quoted 6 lines
drivers/media/video/tvp514x.c +0
-6-int num_stds; -struct tvp514x_std_info *std_list; - -struct v4l2_routing route; -}; -[Hiremath, Vaibhav] You may want to revisit this change, since
Quoted 6 lines
there is only one line addition to the struct "struct
tvp514x_reg". Patch will look clean if it only indicates the changes. I'm adding also
| + structtvp514x_reg
| tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
[Hiremath, Vaibhav] This is the only line I was also talking about.
Quoted 7 lines
which contains
vp514x_reg_list_defaultwhich is defined below. I prefered
not to do a forward declration oftvp514x_reg_list_defaultand therefore I
movedtvp514x_decoderjust after it.
Would you prefer it with a forward declarion?
[Hiremath, Vaibhav] Since this is static and default declaration I would prefer it to be moved above struct tvp514x_decoder.
Quoted 100 lines
Quoted 7 lines
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[]
Quoted 7 lines
drivers/media/video/tvp514x.c +1
-1/* TVP514x default register values */ -static struct tvp514x_reg tvp514x_reg_list[] = { +static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE ,REG_INPUT_SEL ,0x05 },/* Composite selected */ {TOK_WRITE ,REG_AFE_GAIN_CTRL ,0x0F }, {TOK_WRITE ,REG_VIDEO_STD ,0x00 },/* Auto mode */ @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[]=
Quoted 9 lines
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[] = { · line 153
Quoted 6 lines
drivers/media/video/tvp514x.c +2
-0{ {TOK_TERM, 0, 0}, }; +/** + * struct tvp514x_decoded - TVP5146/47 decoder object[Hiremath, Vaibhav] Please correct the spelling mistake "
tvp514x_decoder", I had missed this in my original patch.okay.
Quoted 13 lines
drivers/media/video/tvp514x.c static struct tvp514x_reg tvp514x_reg_list[] = { · line 166
Quoted 13 lines
drivers/media/video/tvp514x.c +13
-0+* @v4l2_int_device: Slave handle +* @pdata: Board specific +* @client: I2C client data +* @id: Entry from I2C table +* @ver: Chip version +* @state: TVP5146/47 decoder state - detected or not-detected +* @pix: Current pixel format +* @num_fmts: Number of formats +* @fmt_list: Format list +* @current_std: Current standard +* @num_stds: Number of standards +* @std_list: Standards list +* @route: input and output routing at chip level Quoted 1 line
[Hiremath, Vaibhav] You may want to add the new parameter added to
this struct.
good point.Quoted 28 lines
Quoted 27 lines
drivers/media/video/tvp514x.c +23
-0+*/ +struct tvp514x_decoder { +struct v4l2_int_device v4l2_int_device; +const struct tvp514x_platform_data *pdata; +struct i2c_client *client; + +struct i2c_device_id *id; + +int ver; +enum tvp514x_state state; + +struct v4l2_pix_format pix; +int num_fmts; +const struct v4l2_fmtdesc *fmt_list; + +enum tvp514x_std current_std; +int num_stds; +struct tvp514x_std_info *std_list; + +struct v4l2_routing route; +struct tvp514x_reg tvp514x_regs[ARRAY_SIZE (tvp514x_reg_list_default)]; +}; +/* List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be
* extended to 10/20 bit mode.Quoted 4 lines
drivers/media/video/tvp514x.c static struct v4l2_int_device · line 1392
Quoted 4 lines
drivers/media/video/tvp514x.c +0
-0@@ -1392,26 +1390,39 @@ static struct v4l2_int_device tvp514x_int_device = { static int tvp514x_probe(struct i2c_client *client, const struct
i2c_device_idQuoted 23 lines
Quoted 23 lines
drivers/media/video/tvp514x.c +8
-4*id) { -struct tvp514x_decoder *decoder = &tvp514x_dev; +struct tvp514x_decoder *decoder;int err;/* Check if the adapter supports the needed features */ if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA ))return -EIO ; - decoder->pdata = client->dev.platform_data; -if (!decoder->pdata) { + decoder =kzalloc (sizeof (*decoder),GFP_KERNEL ); +if (!decoder) +return -ENOMEM ; + +if (!client->dev.platform_data) {v4l_err (client,"No platform data!!\n" ); -return -ENODEV ; + err = -ENODEV ; + goto out_free; }Quoted 8 lines
drivers/media/video/tvp514x.c static struct v4l2_int_device tvp514x_int_device = { · line 1415
Quoted 7 lines
drivers/media/video/tvp514x.c +7
-0+ + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; + +BUILD_BUG_ON (sizeof (decoder->tvp514x_regs) != +sizeof (tvp514x_reg_list_default));[Hiremath, Vaibhav] Do we really need to check this? I think you
Quoted 4 lines
are defining the decoder-
Quoted 1 line
tvp514x_regs[sizeof(tvp514x_reg_list_default)].
I can get rid of it if you want. It is just a sanity check.
[Hiremath, Vaibhav] I think there is no need to add unnecessary check here, you can remove this.
Quoted 3 lines
Quoted 2 lines
Quoted 2 lines
drivers/media/video/tvp514x.c +2
-0+memcpy (decoder->tvp514x_regs, tvp514x_reg_list_default, +sizeof (tvp514x_reg_list_default));
Thanks,
Vaibhav Hiremath
Quoted 20 lines
-----Original Message-----
From: [email protected] [mailto:linux-media- [email protected]] On Behalf Of Sebastian Andrzej Siewior
Sent: Wednesday, January 28, 2009 9:00 PM
To: Hiremath, Vaibhav
Cc: [email protected]; Mauro Carvalho Chehab; video4linux- [email protected]
Subject: [PATCH v2] v4l/tvp514x: make the module aware of rich peoplebecause they might design two of those chips on a single board. You never know.
Signed-off-by Sebastian Andrzej Siewior <[email protected]>---
v2: Make the content of the registers (brightness, \ldots) per decoder
and not global.
v1: Initial version
Quoted 4 lines
drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++-------- ----------- 1 files changed, 90 insertions(+), 76 deletions(-)
[Hiremath, Vaibhav] Sebastian, I have done the basic testing and it seems to be working for me. I will ack the patch from my side once you fix the comments.
Quoted 10 lines
drivers/media/video/tvp514x.c +0
-1@@ -86,45 +86,8 @@ struct tvp514x_std_info {struct v4l2_standard standard; }; -/**