MIPS: Add VCT board series support (Part 1/3)
PATCH v3 1/3 MIPS: Add VCT board series support (Part 1/3)
---
v3:
- Added USB EHCI support
- Added performance enhanced OneNAND read support
v2:
- Fixed issues in u-boot.lds mentioned by Andrew Dyer
board/micronas/vct/Makefile | 57 ++++++++ board/micronas/vct/bcu.h | 170 ++++++++++++++++++++++++ board/micronas/vct/config.mk | 31 +++++ board/micronas/vct/dcgu.c | 258 ++++++++++++++++++++++++++++++++++++ board/micronas/vct/dcgu.h | 179 +++++++++++++++++++++++++ board/micronas/vct/ebi.c | 48 +++++++ board/micronas/vct/ebi.h | 95 +++++++++++++ board/micronas/vct/ebi_nor_flash.c | 131 ++++++++++++++++++ board/micronas/vct/ebi_onenand.c | 198 +++++++++++++++++++++++++++ board/micronas/vct/ebi_smc911x.c | 94 +++++++++++++ 10 files changed, 1261 insertions(+), 0 deletions(-) create mode 100644 board/micronas/vct/Makefile create mode 100644 board/micronas/vct/bcu.h create mode 100644 board/micronas/vct/config.mk create mode 100644 board/micronas/vct/dcgu.c create mode 100644 board/micronas/vct/dcgu.h create mode 100644 board/micronas/vct/ebi.c create mode 100644 board/micronas/vct/ebi.h create mode 100644 board/micronas/vct/ebi_nor_flash.c create mode 100644 board/micronas/vct/ebi_onenand.c create mode 100644 board/micronas/vct/ebi_smc911x.c
board/micronas/vct/Makefile new file +57 -0
@@ -0,0 +1,57 @@ +# +# (C) Copyright 2008 Stefan Roese <[email protected]>, DENX Software Engineering +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := $(BOARD).o +COBJS-y += ebi.o +COBJS-$(CONFIG_VCT_NOR) += ebi_nor_flash.o +COBJS-$(CONFIG_VCT_ONENAND) += ebi_onenand.o +COBJS-$(CONFIG_DRIVER_SMC911X) += ebi_smc911x.o smc_eeprom.o +COBJS-y += gpio.o +COBJS-y += top.o +COBJS-$(CONFIG_USB_EHCI_VCT) += dcgu.o ehci.o scc.o + +COBJS := $(sort $(COBJS-y)) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/micronas/vct/bcu.h new file +170 -0
170 lines not on this page · raw message
board/micronas/vct/config.mk new file +31 -0
@@ -0,0 +1,31 @@ +# +# (C) Copyright 2008 Stefan Roese <[email protected]>, DENX Software Engineering +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# vct_xxx boards with MIPS 4Kc CPU core +# + +sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0x87000000 +endif
board/micronas/vct/dcgu.c new file +258 -0
258 lines not on this page · raw message
board/micronas/vct/dcgu.h new file +179 -0
179 lines not on this page · raw message
board/micronas/vct/ebi.c new file +48 -0
48 lines not on this page · raw message
board/micronas/vct/ebi.h new file +95 -0
95 lines not on this page · raw message
board/micronas/vct/ebi_nor_flash.c new file +131 -0
131 lines not on this page · raw message
board/micronas/vct/ebi_onenand.c new file +198 -0
198 lines not on this page · raw message
board/micronas/vct/ebi_smc911x.c new file +94 -0
94 lines not on this page · raw message
Signature · 1 line
1.6.1
PATCH v3 1/3 MIPS: Add VCT board series support (Part 1/3)
Quoted 22 lines · Stefan Roese
Signed-off-by Stefan Roese <[email protected]>---
v3:
- Added USB EHCI support
- Added performance enhanced OneNAND read supportv2:
- Fixed issues inu-boot.ldsmentioned by Andrew Dyerboard/micronas/vct/Makefile | 57 ++++++++ board/micronas/vct/bcu.h | 170 ++++++++++++++++++++++++ board/micronas/vct/config.mk | 31 +++++ board/micronas/vct/dcgu.c | 258 ++++++++++++++++++++++++++++++++++++ board/micronas/vct/dcgu.h | 179 +++++++++++++++++++++++++ board/micronas/vct/ebi.c | 48 +++++++ board/micronas/vct/ebi.h | 95 +++++++++++++ board/micronas/vct/ebi_nor_flash.c | 131 ++++++++++++++++++ board/micronas/vct/ebi_onenand.c | 198 +++++++++++++++++++++++++++ board/micronas/vct/ebi_smc911x.c | 94 +++++++++++++ 10 files changed, 1261 insertions(+), 0 deletions(-) create mode 100644 board/micronas/vct/Makefile create mode 100644 board/micronas/vct/bcu.h
Quoted 8 lines
create mode 100644 board/micronas/vct/config.mk create mode 100644 board/micronas/vct/dcgu.c create mode 100644 board/micronas/vct/dcgu.h create mode 100644 board/micronas/vct/ebi.c create mode 100644 board/micronas/vct/ebi.h create mode 100644 board/micronas/vct/ebi_nor_flash.c create mode 100644 board/micronas/vct/ebi_onenand.c create mode 100644 board/micronas/vct/ebi_smc911x.c
No objection from me, will apply.
Stefan, I'm going to fold all patches into sinble commit, ok?
PATCH v3 1/3 MIPS: Add VCT board series support (Part 1/3)
Quoted 3 lines · Shinya Kuribayashi
No objection from me, will apply.
Stefan, I'm going to fold all patches into sinble commit, ok?
That's ok with me. Not sure if Wolfgang has an objection though, since he might have problems tracking the status of the patches.
Wolfgang, an objections from you?
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
PATCH v3 1/3 MIPS: Add VCT board series support (Part 1/3)
Dear Stefan Roese,
Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 3 lines · Shinya Kuribayashi
No objection from me, will apply.
Stefan, I'm going to fold all patches into sinble commit, ok?
That's ok with me. Not sure if Wolfgang has an objection though, since he might have problems tracking the status of the patches.
Wolfgang, an objections from you?
Yes, indeed. I like to see commits matching patches as posted on the mailing list.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Wisdom is one of the few things that looks bigger the further away it is. - Terry Pratchett, _Witches Abroad_
PATCH v3 1/3 MIPS: Add VCT board series support (Part 1/3)
Quoted 8 lines · Wolfgang Denk
Quoted 5 lines
Quoted 1 line
Stefan, I'm going to fold all patches into sinble commit, ok?
That's ok with me. Not sure if Wolfgang has an objection though, since he might have problems tracking the status of the patches.
Wolfgang, an objections from you?
Yes, indeed. I like to see commits matching patches as posted on the mailing list.
Ok, sorry for the noise. I'll send a pull request soon.
Shinya