Problems with latest driver and iwl4965
My environment:
Ubuntu 08.10
uname -a: Linux dell5400 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 GNU/Linu
wifie:
ls -la compat-wireless-2009-01-19 -> latest driver
dmesg | grep iwl
dmesg | grep iwl
[ 12.148010] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 12.148012] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 12.148068] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 12.148076] iwlagn 0000:0c:00.0: setting latency timer to 64 [ 12.148093] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 [ 12.177631] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels [ 12.233747] iwlagn 0000:0c:00.0: PCI INT A disabled [ 12.234132] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 33.849292] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 33.849370] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [ 33.849542] firmware: requesting iwlwifi-5000-1-lbm.ucode [ 36.301423] Registered led device: iwl-phy0:radio [ 36.302226] Registered led device: iwl-phy0:assoc [ 36.302629] Registered led device: iwl-phy0:RX [ 36.303297] Registered led device: iwl-phy0:TX
dmesg | grep Intel
dmesg | grep Intel
[ 0.342534] CPU0: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz stepping 06 [ 0.428944] CPU1: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz stepping 06 [ 10.971737] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset [ 11.686362] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 11.686379] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.148010] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 12.148012] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 12.148093] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
lsmod | grep iwl
lsmod | grep iwl
iwlagn 99844 0 iwlcore 92672 1 iwlagn rfkill 17176 2 iwlcore led_class 12164 1 iwlcore lbm_cw_mac80211 210728 2 iwlagn,iwlcore lbm_cw_cfg80211 39696 3 iwlagn,iwlcore,lbm_cw_mac80211
The problems ONLY occur on this kernel version using the latest driver as mentioned earlier.
A former kernel (2.6.19) as well as the alternative windows installation do not show any uncommon behavior.
Problem description:
Directly after starting the device, the internet connection is stable.
Quoted 1 line
From time to time however the connection for at least the http based
protocol as well as the protocol used for mail stops working. None of the available log-files produce any additional output during off-time.
A wget request like the following produces:
tmaus@dell5400:~$ wget yahoo.com --2009-01-27 09:42:47-- http://yahoo.com/ Resolving yahoo.com... 68.180.206.184, 206.190.60.37 Connecting to yahoo.com|68.180.206.184|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://www.yahoo.com/ [following] --2009-01-27 09:42:47-- http://www.yahoo.com/ Resolving www.yahoo.com... 87.248.113.14 Connecting to www.yahoo.com|87.248.113.14|:80... connected. HTTP request sent, awaiting response...
where at the same time a ping request produces:
tmaus@dell5400:~$ ping yahoo.com PING yahoo.com (68.180.206.184) 56(84) bytes of data. 64 bytes from w2.rc.vip.sp1.yahoo.com (68.180.206.184): icmp_seq=1 ttl=49 time=191 ms 64 bytes from w2.rc.vip.sp1.yahoo.com (68.180.206.184): icmp_seq=2 ttl=49 time=189 ms 64 bytes from w2.rc.vip.sp1.yahoo.com (68.180.206.184): icmp_seq=3 ttl=49 time=190 ms
My instant messaging clients do work properly all the time without exception.
Quoted 1 line
From my point of view, this must be a bug within the latest driver ...
but as my knowledge on this topic is not deep, I kindly ask you to have a look at my mail and to respond to me ..
thanks in advance and greetings from berlin
thorsten maus
Quoted 6 lines · Thorsten Maus
Problem description:
Directly after starting the device, the internet connection is stable. From time to time however the connection for at least the http based protocol as well as the protocol used for mail stops working. None of the available log-files produce any additional output during off-time.
Would it be possible to obtain an over the air as well as a local tcpdump on your wireless interface capture during this time?
Also, when this problem occurs, could you please enable RX and TX debugging as follows and then rerun your test:
$ echo 0x41843fff > /sys/class/net/wlan0/device/debug_level
This will generate a lot of information. Would it be possible to send all kernel messages to a file (edit syslog.conf) temporarily to ensure we get all information?
Thanks
Reinette