Skip to contentSkip to conversation

Loading Linux Image on AT91SAM9263-EK

U-Boot Derek Ou 1 participant 1 message Feb 11, 2009 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Derek Ou

author
#1 lore raw

You can use U-boot to write the file to NAND as well. The address does not matter as long
as your bootcmd is reading the kernel from the same address.

Please check your U-boot environment settings and your nand dump of the NAND location
(0x200000). If you want to get help, post those information.

Derek

Quoted 13 lines

Date: Wed, 11 Feb 2009 15:33:19 -0400
From: Amandeep Bhullar <[email protected]>
Subject: [U-Boot] Loading Linux Image on AT91SAM9263-EK
To: dasfoo at yahoo.com

I have questions about loading the Linux Image. Do I just use SAM-BA v2.7 tool and send file uImage to address 0x200000? I tied that and I got Error: Cant get kernel image.

Any help will be appreciated !!

Aman.