Create configuration option for restricted ns16550 functions
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
This patch will create a configuration option for a minimum configuration for the ns16550 serial driver at drivers/serial/ns16550.c which will exclude all functions with exception of NS16550_putc and NS16550_init. This will be used primarily to save space and remove unused code from builds in which space is limited.
--- README | 7 +++++++ drivers/serial/ns16550.c | 4 ++++ 2 files changed, 11 insertions(+), 0 deletions(-)
README +7 -0
@@ -2434,6 +2434,13 @@ use the "saveenv" command to store a valid environment. - CONFIG_SYS_64BIT_STRTOUL: Adds simple_strtoull that returns a 64bit value +- CONFIG_NS16550_MIN_FUNCTIONS: + Define this if you desire to only have use of the NS16550_init + and NS16550_putc functions for the serial driver located at + drivers/serial/ns16550.c. This option is useful for saving + space for already greatly restricted images, including but not + limited to NAND_SPL configurations. + Low Level (hardware related) configuration options: ---------------------------------------------------
drivers/serial/ns16550.c +4 -0
@@ -39,6 +39,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)#endif } +#ifndef CONFIG_NS16550_MIN_FUNCTIONS void NS16550_reinit (NS16550_t com_port,int baud_divisor) { com_port->ier =0x00 ;
@@ -53,6 +54,7 @@ void NS16550_reinit (NS16550_t com_port, int baud_divisor) com_port->dlm = (baud_divisor >>8 ) &0xff ; com_port->lcr = LCRVAL; } +#endif /* CONFIG_NS16550_MIN_FUNCTIONS */ void NS16550_putc (NS16550_t com_port,char c) {
@@ -60,6 +62,7 @@ void NS16550_putc (NS16550_t com_port, char c) com_port->thr = c; } +#ifndef CONFIG_NS16550_MIN_FUNCTIONS char NS16550_getc (NS16550_t com_port) {while ((com_port->lsr &LSR_DR ) ==0 ) {
@@ -76,4 +79,5 @@ int NS16550_tstc (NS16550_t com_port)return ((com_port->lsr &LSR_DR ) !=0 ); } +#endif /* CONFIG_NS16550_MIN_FUNCTIONS */ #endif
Signature · 1 line
1.5.5.1
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Review void NS16550_reinit (NS16550_t com_port, int baud_divisor) · line 57
Quoted 9 lines · On Tue, 17 Feb 2009 12:14:17 -0800 Ron Madrid <[email protected]> wrote:
(quoted diff) +2
-0+#ifndef CONFIG_NS16550_MIN_FUNCTIONS void NS16550_reinit (NS16550_t com_port, int baud_divisor) { com_port->ier = 0x00;@@ -53,6 +54,7 @@ void NS16550_reinit (NS16550_t com_port, int baud_divisor) com_port->dlm = (baud_divisor >> 8) & 0xff; com_port->lcr = LCRVAL; } +#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
So this patch gives this when CONFIG_NS16550_MIN_FUNCTIONS is set:
/home/r1aaha/git/u-boot/drivers/serial/serial.c:229: undefined reference to NS16550_reinit' drivers/serial/libserial.a(serial.o): In function _serial_tstc':/home/r1aaha/git/u-boot/drivers/serial/serial.c:220: undefined reference to NS16550_tstc' drivers/serial/libserial.a(serial.o): In function _serial_getc':/home/r1aaha/git/u-boot/drivers/serial/serial.c:214: undefined reference to `NS16550_getc'
make: *** [u-boot] Error 1
this is my proposed fix:
drivers/serial/ns16550.c +5 -0
@@ -54,6 +54,8 @@ void NS16550_reinit (NS16550_t com_port, int baud_divisor) com_port->dlm = (baud_divisor >>8 ) &0xff ; com_port->lcr = LCRVAL; } +#else +void NS16550_reinit (NS16550_t com_port,int baud_divisor) { }#endif /* CONFIG_NS16550_MIN_FUNCTIONS */ void NS16550_putc (NS16550_t com_port,char c)
@@ -79,5 +81,8 @@ int NS16550_tstc (NS16550_t com_port)return ((com_port->lsr &LSR_DR ) !=0 ); } +#else +char NS16550_getc (NS16550_t com_port) { } +int NS16550_tstc (NS16550_t com_port) { }#endif /* CONFIG_NS16550_MIN_FUNCTIONS */ #endif
(not sure if the latter _getc and _tstc functions should be individually #ifdef-wrapped)
Anyway, this patch gets my ack if the fix is also get applied, because it gets rid of the current SIMPC8313 NAND bootstrap too big build failure.
Thanks,
Kim
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Quoted 8 lines · Kim Phillips
So this patch gives this when
CONFIG_NS16550_MIN_FUNCTIONSis set:
/home/r1aaha/git/u-boot/drivers/serial/serial.c:229: undefined reference toNS16550_reinit' drivers/serial/libserial.a(serial.o): In function_serial_tstc':/home/r1aaha/git/u-boot/drivers/serial/serial.c:220: undefined reference toNS16550_tstc' drivers/serial/libserial.a(serial.o): In function_serial_getc':/home/r1aaha/git/u-boot/drivers/serial/serial.c:214: undefined reference to `NS16550_getc'
make: *** [u-boot] Error 1
So don't define that symbol if you're going to be using the functions that we're trying to trim away.
drivers/serial/ns16550.c void NS16550_reinit (NS16550_t com_port, int baud_divisor) · line 58
Quoted 12 lines
this is my proposed fix:
drivers/serial/ns16550.c +2
-0@@ -54,6 +54,8 @@ void NS16550_reinit (NS16550_t com_port, int baud_divisor) com_port->dlm = (baud_divisor >>8 ) &0xff ; com_port->lcr = LCRVAL; } +#else +void NS16550_reinit (NS16550_t com_port,int baud_divisor) { }
No, this adds bytes. The whole purpose of this is to cut away bytes for NAND bootstraps.
-Scott
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
In reply to Kim PhillipsDear Kim Phillips,
Quoted 1 line · In message <[email protected]> you wrote:
...
Quoted 1 line
this is my proposed fix:
In addition to the unnecessary overhead for the memory footprint there are other problems with that patch:
drivers/serial/ns16550.c int NS16550_tstc (NS16550_t com_port) · line 86
Quoted 3 lines
drivers/serial/ns16550.c +3
-0+#else +char NS16550_getc (NS16550_t com_port) { } +int NS16550_tstc (NS16550_t com_port) { }
If these functions are supposed to return "char" resp. "int", you will get casty compiler warnings with an empty function body.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Any excuse will serve a tyrant." - Aesop
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Quoted 6 lines · On Wed, 18 Feb 2009 19:29:27 +0100 Wolfgang Denk <[email protected]> wrote:
drivers/serial/ns16550.c int NS16550_tstc (NS16550_t com_port) · line 86
Quoted 3 lines
drivers/serial/ns16550.c +3
-0+#else +char NS16550_getc (NS16550_t com_port) { } +int NS16550_tstc (NS16550_t com_port) { }If these functions are supposed to return "char" resp. "int", you will get casty compiler warnings with an empty function body.
I didn't see them, but anyway, please consider this patch (u-boot-spl is 32 bytes smaller than previous empty-fn-body based patch):
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Quoted 7 lines · Kim Phillips
include/ns16550.h +0
-0@@ -154,6 +154,12 @@ typedef volatile struct NS16550 *NS16550_t;void NS16550_init (NS16550_t com_port,int baud_divisor);
include/ns16550.h typedef volatile struct NS16550 *NS16550_t; · line 165
Quoted 10 lines
include/ns16550.h +6
-0void NS16550_putc (NS16550_t com_port,char c); +#ifndef CONFIG_SYS_NS16550_MIN_FUNCTIONS char NS16550_getc (NS16550_t com_port);int NS16550_tstc (NS16550_t com_port);void NS16550_reinit (NS16550_t com_port,int baud_divisor); +#else +#define NS16550_getc (com_port) 0 +#define NS16550_tstc (com_port) 0 +#define NS16550_reinit (com_port, baud_divisor) +#endif
I think it would be better to get the error than to silently nop these functions out. The point is to eliminate them when they're not used at all, such as in the AND bootstrap.
Plus, the above definitions could cause unused variable warnings if nothing else consumes the arguments to the macros.
-Scott
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
In reply to Kim Phillipsinclude/configs/SIMPC8313.h line 208
Quoted 10 lines · Kim Phillips
include/configs/SIMPC8313.h +1
-0@@ -205,6 +205,7 @@#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_MIN_FUNCTIONS
If you case the CONFIG_SYS_NS16550_MIN_FUNCTIONS within a #ifdef CONFIG_NAND_SPL you don't need the following definitions.
include/configs/SIMPC8313.h
Quoted 10 lines
include/configs/SIMPC8313.h +1
-0+#ifndef CONFIG_SYS_NS16550_MIN_FUNCTIONS char NS16550_getc (NS16550_t com_port);int NS16550_tstc (NS16550_t com_port); void NS16550_reinit (NS16550_t com_port, int
baud_divisor);include/configs/SIMPC8313.h +5
-0+#else +#define NS16550_getc (com_port) 0 +#define NS16550_tstc (com_port) 0 +#define NS16550_reinit (com_port, baud_divisor) +#endif
I was going to send a patch after this one was accepted that takes care of the SIMPC8313 build. Should I have sent the two of them together? I thought that they would be considered too different. It would be this below.
include/configs/SIMPC8313.h +4 -0
@@ -212,6 +212,10 @@#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif +/* Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
If you'd like, I can send this one now or you could put the new config option inside of a #ifdef CONFIG_NAND_SPL.
Ron
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Quoted 36 lines · On Wed, 18 Feb 2009 12:02:02 -0800 (PST) Ron Madrid <[email protected]>…
include/configs/SIMPC8313.h line 208
Quoted 10 lines · Kim Phillips
include/configs/SIMPC8313.h +1
-0@@ -205,6 +205,7 @@#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_MIN_FUNCTIONS If you case the
CONFIG_SYS_NS16550_MIN_FUNCTIONSwithin a #ifdefCONFIG_NAND_SPLyou don't need the following definitions.include/configs/SIMPC8313.h
Quoted 10 lines
include/configs/SIMPC8313.h +1
-0+#ifndef CONFIG_SYS_NS16550_MIN_FUNCTIONS char NS16550_getc (NS16550_t com_port);int NS16550_tstc (NS16550_t com_port); void NS16550_reinit (NS16550_t com_port, int
baud_divisor);include/configs/SIMPC8313.h +5
-0+#else +#define NS16550_getc (com_port) 0 +#define NS16550_tstc (com_port) 0 +#define NS16550_reinit (com_port, baud_divisor) +#endif I was going to send a patch after this one was accepted that takes care of the SIMPC8313 build. Should I have sent the two of them together? I thought that they would be considered too different. It would be this below.
include/configs/SIMPC8313.h +0
-0
include/configs/SIMPC8313.h line 216
Quoted 5 lines
include/configs/SIMPC8313.h +2
-0@@ -212,6 +212,10 @@#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS
I think you're right - this really needs to be a CONFIG_ without SYS_. Sorry.
Quoted 2 lines
If you'd like, I can send this one now or you could put the new config option inside of a #ifdef
CONFIG_NAND_SPL.
one more time:
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
In reply to Ron MadridDear Ron Madrid,
Quoted 5 lines · In message <[email protected]> you wrote:
I was going to send a patch after this one was accepted that takes care of the SIMPC8313 build. Should I have sent the two of them together? I thought that they would be considered too different. It would be this below.
They should go together, or we have problems when bisecting.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Life. Don't talk to me about life. - Marvin the Paranoid Android
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Quoted 10 lines · On Wed, 18 Feb 2009 23:11:30 +0100 Wolfgang Denk <[email protected]> wrote:
Dear Ron Madrid,
Quoted 5 lines · In message <[email protected]> you wrote:
I was going to send a patch after this one was accepted that takes care of the SIMPC8313 build. Should I have sent the two of them together? I thought that they would be considered too different. It would be this below.
They should go together, or we have problems when bisecting.
not really a problem, just giving bisect a miniscule dent in the number of iterations it would have to go through to resolve a problem.
I've resent the patch with sCONFIG_SYS/CONFIG_/g and merged the enable on the board changes in this email thread. Let me know if you want it to go through the mpc83xx tree.
Kim
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Dear Kim Phillips,
Quoted 4 lines · In message <[email protected]> you wrote:
I've resent the patch with sCONFIG_SYS/CONFIG_/g and merged the enable on the board changes in this email thread. Let me know if you want it to go through the mpc83xx tree.
Not needed, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Hindsight is an exact science.
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
In reply to Kim PhillipsQuoted 4 lines · On Wed, 18 Feb 2009 12:21:52 -0600 Kim Phillips <[email protected]>…
Quoted 1 line · On Tue, 17 Feb 2009 12:14:17 -0800 Ron Madrid <[email protected]> wrote:
+#ifndef
CONFIG_NS16550_MIN_FUNCTIONS
sorry, I forgot to mention that this needs to be a CONFIG_SYS_, i.e, CONFIG_SYS_NS16550_MIN_FUNCTIONS.
Kim
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Quoted 7 lines · Kim Phillips
From: Kim Phillips <[email protected]>
Subject: Re: [U-Boot] [PATCH v2] Create configuration option for restricted ns16550 functions
To: "Ron Madrid" <[email protected]>, u-boot at lists.denx.de
Date: Wednesday, February 18, 2009, 10:30 AM
On Wed, 18 Feb 2009 12:21:52 -0600
Kim Phillips <[email protected]> wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 1 line · On Tue, 17 Feb 2009 12:14:17 -0800 Ron Madrid <[email protected]> wrote:
+#ifndef
CONFIG_NS16550_MIN_FUNCTIONSsorry, I forgot to mention that this needs to be a
CONFIG_SYS_, i.e,CONFIG_SYS_NS16550_MIN_FUNCTIONS.
My mistake. I was to understand that the CONFIG_SYS_ flavor of options was for hardware specific defines, that is an option due to a hardware need, not a simple exclusion of driver functions. I can redo this patch though.
Ron
PATCH v2 1/1 Create configuration option for restricted ns16550 functions
Dear Ron,
Quoted 1 line · In message <[email protected]> you wrote:
--- On Wed, 2/18/09, Kim Phillips <[email protected]> wrote:
...
Quoted 7 lines
Quoted 3 lines
sorry, I forgot to mention that this needs to be a
CONFIG_SYS_, i.e,CONFIG_SYS_NS16550_MIN_FUNCTIONS.My mistake. I was to understand that the
CONFIG_SYS_flavor of options was for hardware specific defines, that is an option due to a hardware need, not a simple exclusion of driver functions. I can redo this patch though.
You are correct. This is a CONFIG_ thingy, not a CONFIG_SYS_ one.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Eureka! -- Archimedes