cxgb3: Add support for PCI ID 0x35.
Subsystems (2)
PATCH 1/1 cxgb3: Add support for PCI ID 0x35.
From: Divy Le Ray <[email protected]>
Add support for adapters with a PCI id equal to 0x35.
---
drivers/net/cxgb3/cxgb3_main.c | 1 + drivers/net/cxgb3/t3_hw.c | 7 +++++++ 2 files changed, 8 insertions(+), 0 deletions(-)
drivers/net/cxgb3/cxgb3_main.c +1 -0
@@ -90,6 +90,7 @@ static const struct pci_device_id cxgb3_pci_tbl[] = {CH_DEVICE (0x30 ,2 ),/* T3B10 */ CH_DEVICE (0x31 ,3 ),/* T3B20 */ CH_DEVICE (0x32 ,1 ),/* T3B02 */ +CH_DEVICE (0x35 ,6 ),/* T3C20-derived T3C10 */ {0,} };
drivers/net/cxgb3/t3_hw.c +7 -0
@@ -512,6 +512,13 @@ static const struct adapter_info t3_adap_info[] = { F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { S_GPIO9, S_GPIO3 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, &mi1_mdio_ext_ops, "Chelsio T320"}, + {}, + {}, + {1, 0, +F_GPIO1_OEN |F_GPIO2_OEN |F_GPIO4_OEN |F_GPIO6_OEN |F_GPIO7_OEN | +F_GPIO10_OEN |F_GPIO1_OUT_VAL |F_GPIO6_OUT_VAL |F_GPIO10_OUT_VAL , + { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, + &mi1_mdio_ext_ops, "Chelsio T310" }, };/*
David Miller
maintainerFrom: Divy Le Ray <[email protected]>
Date: Sun, 15 Feb 2009 20:46:15 -0800
Quoted 3 lines
Add support for adapters with a PCI id equal to
0x35.Signed-off-by Divy Le Ray <[email protected]>
Adding new IDs is something we can do in net-2.6, so I'm going to add this patch there.
Let me know if you don't want me to do that, or if there is some dependency with net-next-2.6 that I'm not seeing.
Thanks!
Quoted 6 lines · David Miller
From: Divy Le Ray <[email protected]>
Date: Sun, 15 Feb 2009 20:46:15 -0800Quoted 2 lines
Add support for adapters with a PCI id equal to
0x35.
Quoted 9 lines
Quoted 2 lines
Signed-off-by Divy Le Ray <[email protected]>Adding new IDs is something we can do in net-2.6, so I'm going to add this patch there.
Let me know if you don't want me to do that, or if there is some dependency with net-next-2.6 that I'm not seeing.
Hi Dave,
Applying it against net-2.6 is all good.
Cheers,
Divy