zc3xx: "Creative Webcam Live!" never worked with in-tree driver
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).
Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel gspca_zc3xx drivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:
Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: WebCam Live!
Capabilites: video capture read/write streaming supported norms:
inputs: 0 = zc3xx;
Current input: 0
Current format: unknown (0x4745504a)tv.c: norm_from_string(pal): Bogus norm parameter, setting default.
v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option. No stream found.
v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.
Exiting... (End of file)
I've regressed back to the original import of the spca driver in the kernel tree and this doesn't fix it, so I'm assuming that the driver were not merged correctly for my particular device.
Basically the driver probes and load fine as is right now, no unusual message in dmesg as far as I can see:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
gspca: probing 041e:4036
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
I can post the output of the gspcav1 module with debug=5 for the register writes/reads if that is interesting, or anything else for that matter - I'd really like to keep this webcam working and staying at kernel 2.6.25 is not an option.
is there a way to get the gspca_zc3xx driver dump register read/writes? this would be a quick way to compare the two drivers and look at the differences.
Cheers,
Auke
Quoted 52 lines · Auke Kok
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).
Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel
gspca_zc3xxdrivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: WebCam Live!
Capabilites: video capture read/write streaming supported norms:
inputs: 0 = zc3xx;
Current input: 0
Current format: unknown (0x4745504a)tv.c:norm_from_string(pal): Bogus norm parameter, setting default.
v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option. No stream found.v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.Exiting... (End of file)
I've regressed back to the original import of the spca driver in the kernel tree and this doesn't fix it, so I'm assuming that the driver were not merged correctly for my particular device.
Basically the driver probes and load fine as is right now, no unusual message in dmesg as far as I can see:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
gspca: probing 041e:4036
zc3xx: probe 2wr ov vga0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
Quoted 9 lines
I can post the output of the gspcav1 module with debug=5 for the register writes/reads if that is interesting, or anything else for that matter - I'd really like to keep this webcam working and staying at kernel 2.6.25 is not an option.
is there a way to get the
gspca_zc3xxdriver dump register read/writes? this would be a quick way to compare the two drivers and look at the differences.Cheers,
Auke
seems I just found the v4lcompat.so stuff, which (apart from being a pain in the rear) makes the webcam work again...
Cheers,
Auke
Quoted 72 lines · On Tue, 24 Feb 2009 16:00:59 -0800 Auke Kok <[email protected]> wrote:
Quoted 71 lines · Auke Kok
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).
Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel
gspca_zc3xxdrivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: WebCam Live!
Capabilites: video capture read/write streaming supported norms:
inputs: 0 = zc3xx;
Current input: 0
Current format: unknown (0x4745504a)tv.c:norm_from_string(pal): Bogus norm parameter, setting default.
v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option. No stream found.v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.Exiting... (End of file)
I've regressed back to the original import of the spca driver in the kernel tree and this doesn't fix it, so I'm assuming that the driver were not merged correctly for my particular device.
Basically the driver probes and load fine as is right now, no unusual message in dmesg as far as I can see:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
gspca: probing 041e:4036
zc3xx: probe 2wr ov vga0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registeredI can post the output of the gspcav1 module with debug=5 for the register writes/reads if that is interesting, or anything else for that matter - I'd really like to keep this webcam working and staying at kernel 2.6.25 is not an option.
is there a way to get the
gspca_zc3xxdriver dump register read/writes? this would be a quick way to compare the two drivers and look at the differences.Cheers,
Quoted 7 lines
Quoted 3 lines
Auke
seems I just found the v4lcompat.so stuff, which (apart from being a pain in the rear) makes the webcam work again...
This seems to be a very common error. IMO, we should write message when loading a gspca that would require libv4l in order to work.
Cheers,
Mauro
Quoted 9 lines · Mauro Carvalho Chehab
Quoted 6 lines · On Tue, 24 Feb 2009 16:00:59 -0800 Auke Kok <[email protected]> wrote:
Quoted 5 lines · Auke Kok
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).
Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel
gspca_zc3xxdrivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:
<snip>
Quoted 4 lines
Quoted 1 line
seems I just found the v4lcompat.so stuff, which (apart from being a pain in the rear) makes the webcam work again...
This seems to be a very common error. IMO, we should write message when loading a gspca that would require libv4l in order to work.
it would be wonderful if the v4l stack itself can warn when an application uses the wrong method on the device node... would such a thing be possible?
Auke
Quoted 76 lines · On Tue, 24 Feb 2009 21:19:16 -0300 Mauro Carvalho Chehab <[email protected]>…
Quoted 72 lines · On Tue, 24 Feb 2009 16:00:59 -0800 Auke Kok <[email protected]> wrote:
Quoted 70 lines · Auke Kok
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).
Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel
gspca_zc3xxdrivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: WebCam Live!
Capabilites: video capture read/write streaming supported norms:
inputs: 0 = zc3xx;
Current input: 0
Current format: unknown (0x4745504a)tv.c:norm_from_string(pal): Bogus norm parameter, setting default. v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option. No stream found.v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.Exiting... (End of file)
I've regressed back to the original import of the spca driver in the kernel tree and this doesn't fix it, so I'm assuming that the driver were not merged correctly for my particular device.
Basically the driver probes and load fine as is right now, no unusual message in dmesg as far as I can see:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
gspca: probing 041e:4036
zc3xx: probe 2wr ov vga0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registeredI can post the output of the gspcav1 module with debug=5 for the register writes/reads if that is interesting, or anything else for that matter - I'd really like to keep this webcam working and staying at kernel 2.6.25 is not an option.
is there a way to get the
gspca_zc3xxdriver dump register read/writes? this would be a quick way to compare the two drivers and look at the differences.
Quoted 5 lines
Quoted 2 lines
seems I just found the v4lcompat.so stuff, which (apart from being a pain in the rear) makes the webcam work again...
This seems to be a very common error. IMO, we should write message when loading a gspca that would require libv4l in order to work.
First, it is strange that mplayer does not work: the v4l2 interface seems recognized, but why does it say:
Current format: unknown (0x4745504a)
while this is JPEG and it knows well how to handle it?
Then, at probe time, there is:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control
This means that an other driver wants to handle the webcam. This may raise problems.
Eventually, the v4l library is needed when using any v4l2 driver, not only gspca. Hopefully, many popular applications now use it natively, as vlc 0.9.x.
Cheers.
Signature · 2 lines
Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/
Quoted 81 lines · Jean-Francois Moine
Quoted 67 lines · On Tue, 24 Feb 2009 21:19:16 -0300 Mauro Carvalho Chehab <[email protected]>…
Quoted 64 lines · On Tue, 24 Feb 2009 16:00:59 -0800 Auke Kok <[email protected]> wrote:
Quoted 63 lines · Auke Kok
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that
until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel
gspca_zc3xxdrivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: WebCam Live!
Capabilites: video capture read/write streaming supported norms:
inputs: 0 = zc3xx;
Current input: 0
Current format: unknown (0x4745504a)tv.c:norm_from_string(pal): Bogus norm parameter, setting default. v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option. No stream found.v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.Exiting... (End of file)
I've regressed back to the original import of the spca driver in the kernel tree and this doesn't fix it, so I'm assuming that the driver were not merged correctly for my particular device.
Basically the driver probes and load fine as is right now, no unusual message in dmesg as far as I can see:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
gspca: probing 041e:4036
zc3xx: probe 2wr ov vga0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registeredI can post the output of the gspcav1 module with debug=5 for the register writes/reads if that is interesting, or anything else for that matter - I'd really like to keep this webcam working and
staying at kernel 2.6.25 is not an option.Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
is there a way to get the
gspca_zc3xxdriver dump register read/writes? this would be a quick way to compare the two drivers and look at the differences.seems I just found the v4lcompat.so stuff, which (apart from being a pain in the rear) makes the webcam work again...
This seems to be a very common error. IMO, we should write message when loading a gspca that would require libv4l in order to work.
First, it is strange that mplayer does not work: the v4l2 interface seems recognized, but why does it say:
Quoted 7 lines
Current format: unknown (0x4745504a)while this is JPEG and it knows well how to handle it?
Then, at probe time, there is:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control
I pasted too much there, as you can see below I unloaded that driver:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
Quoted 7 lines
This means that an other driver wants to handle the webcam. This may raise problems.
Eventually, the v4l library is needed when using any v4l2 driver, not only gspca. Hopefully, many popular applications now use it natively, as vlc 0.9.x.
interesting, but I can't get vlc to understand either tv:// or /dev/video0... any hints?
Auke
Quoted 103 lines · Auke Kok
Quoted 83 lines · Jean-Francois Moine
Quoted 69 lines · On Tue, 24 Feb 2009 21:19:16 -0300 Mauro Carvalho Chehab <[email protected]>…
Quoted 66 lines · On Tue, 24 Feb 2009 16:00:59 -0800 Auke Kok <[email protected]> wrote:
Quoted 65 lines · Auke Kok
All,
I have a "Creative Technology, Ltd Webcam Live!/Live! Pro" that until recently worked fine with the out-of-tree gspcav1 driver (gspcav1-20071224.tar.gz is the latest version I used unti 2.6.26).
Since this driver (basically) got merged in the kernel I got my hopes up that the in-kernel
gspca_zc3xxdrivers would work. However, that does not provide a usable video0 device - mplayer tv:// crashes with 'No stream found.' for instance:Playing tv://.
Cache fill: 0.00% (0 bytes)
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: WebCam Live!
Capabilites: video capture read/write streaming supported norms:
inputs: 0 = zc3xx;
Current input: 0
Current format: unknown (0x4745504a)tv.c:norm_from_string(pal): Bogus norm parameter, setting default. v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Selected input hasn't got a tuner!
v4l2: ioctl set mute failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
FPS not specified in the header or invalid, use the -fps option. No stream found.v4l2: ioctl set mute failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.Exiting... (End of file)
I've regressed back to the original import of the spca driver in the kernel tree and this doesn't fix it, so I'm assuming that the driver were not merged correctly for my particular device.
Basically the driver probes and load fine as is right now, no unusual message in dmesg as far as I can see:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301
gspca: probing 041e:4036
zc3xx: probe 2wr ov vga0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registeredI can post the output of the gspcav1 module with debug=5 for the register writes/reads if that is interesting, or anything else for that matter - I'd really like to keep this webcam working and staying at kernel 2.6.25 is not an option.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
is there a way to get the
gspca_zc3xxdriver dump register read/writes? this would be a quick way to compare the two drivers and look at the differences.seems I just found the v4lcompat.so stuff, which (apart from being a pain in the rear) makes the webcam work again...
This seems to be a very common error. IMO, we should write message when loading a gspca that would require libv4l in order to work.
First, it is strange that mplayer does not work: the v4l2 interface seems recognized, but why does it say:
Quoted 7 lines
Current format: unknown (0x4745504a)while this is JPEG and it knows well how to handle it?
Then, at probe time, there is:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control
I pasted too much there, as you can see below I unloaded that driver:
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usbcore: registered new interface driver zc0301
usbcore: deregistering interface driver zc0301Quoted 4 lines
This means that an other driver wants to handle the webcam. This may raise problems.
Quoted 6 lines
Quoted 3 lines
Eventually, the v4l library is needed when using any v4l2 driver, not only gspca. Hopefully, many popular applications now use it natively, as vlc 0.9.x.
interesting, but I can't get vlc to understand either tv:// or
/dev/video0... any hints?
Hi,
With mplayer I use :
mplayer -fps 30 -tv driver=v4l2:width=640:height=480:device=/dev/video0 tv://
and it works well with my Labtec webcam Pro : zc3xx
Michel.
Quoted 7 lines
Auke
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · On Thu, 26 Feb 2009 00:51:51 -0800 Auke Kok <[email protected]> wrote:
Quoted 3 lines
Eventually, the v4l library is needed when using any v4l2 driver, not only gspca. Hopefully, many popular applications now use it natively, as vlc 0.9.x.
interesting, but I can't get vlc to understand either tv:// or
/dev/video0... any hints?
You may find the command line syntax opening the device/file/network flow with the GUI. For webcams, I found:
vlc v4l2:// :v4l2-dev=/dev/video0 :v4l2-standard=0
You may also start the webcam from a playlist with:
#EXTINF:0,webcam #EXTVLCOPT:v4l2-dev=/dev/video0 #EXTVLCOPT:v4l2-standard=0 v4l2://
Signature · 2 lines
Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/