GDI Black Gold [14c7:0108] cx88 card
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello,
I'm interested in getting this card working under Linux as well, it's labelled GDI2500PCTV on the back, and has a Conexant CX23881 visible on the front, with a Philips "TU1216/1 H P" RF box... Looks like there may be some more ICs under the metal box, but I'd have to desolder it to check what they were (which I can do if necessary).
There seems to be TU1216 support in both v4l/saa7134-dvb.c and v4l/budget-av.c (code cut-n-paste by the look of it), but I can't see a way to select this tuner with the cx88xx module (e.g. CARDLIST.tuner).
So... I'm game for trying to get this working, and have a bit of kernel programming experience, but is there anything else I'm likely to need to know before I set out on this?
Cheers!
Tim.
Quoted 67 lines · Richard Runds
Hi,
Have a GDI Black Gold card with subsystem 14c7:0108 and I cannot make it work. Does anyone on the list have a working config for this card and/or know how to make this card work?
I'm getting so far as video1 and vbi1 is created, but I don't have any entries in
/dev/dvb/.cat
/dev/video1> test.mpg produces a video typical of a tv picture without signal (ant-war)... :)config
====
/etc/modprobe.conf:alias char-major-81-1 cx88-dvb
options cx88xx card=2 i2c_scan=1lspci -v:
02:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Modular Technology Holdings Ltd GDI Black Gold
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory atf5000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 202:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Modular Technology Holdings Ltd Unknown device 0108
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory atf6000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2dmesg:
CORE cx88[0]: subsystem: 14c7:0108, board: GDI Black Gold [card=2,insmod option] TV tuner -1 at
0x1fe, Radio tuner -1 at0x1fe
cx88[0]: Test OK
cx88[0]: i2c scan: found device @0x10[???]
cx88[0]: i2c scan: found device @0xa0[eeprom]
cx88[0]: GDI: tuner=unknown
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 23 CORE cx88[0]: subsystem: 14c7:0108, board: GDI Black Gold [card=2,insmod option] TV tuner -1 at0x1fe, Radio tuner -1 at0x1fe
cx88[0]: Test OK
cx88[0]: i2c scan: found device @0x10[???]
cx88[0]: i2c scan: found device @0xa0[eeprom]
cx88[0]: GDI: tuner=unknown
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 23, latency: 64, mmio:0xf5000000cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1Thanks,
//riru
___________________________________________________________Yahoo! Answers - Got a question? Someone out there knows the answer. Try it now.
http://uk.answers.yahoo.com/
Quoted 5 lines
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] GDI Black Gold [14c7:0108] cx88 based DVB-T card
In reply to a message not in the archiveHello,
I'm interested in getting this card working under Linux as well, it's labelled GDI2500PCTV on the back, and has a Conexant CX23881 visible on the front, with a Philips "TU1216/1 H P" RF box... Looks like there may be some more ICs under the metal box, but I'd have to desolder it to check what they were (which I can do if necessary).
According to the preliminary datasheet which I found, the TU1216 contains a TDA 10046 Channel Decoder, and a TDA6651 Mixer/Oscillator.
There seems to be TU1216 support in both v4l/saa7134-dvb.c and v4l/budget-av.c (code cut-n-paste by the look of it), but I can't see a way to select this tuner with the cx88xx module (e.g. CARDLIST.tuner), unless it's called something different, or is compatible with another Philips tuner.
So... I'm game for trying to get this working, and have a bit of kernel programming experience, but is there anything else I'm likely to need to know before I set out on this?
Cheers!
Tim.
Quoted 72 lines · Richard Runds
Hi,
Have a GDI Black Gold card with subsystem 14c7:0108 and I cannot make it work. Does anyone on the list have a working config for this card and/or know how to make this card work?
I'm getting so far as video1 and vbi1 is created, but I don't have any entries in
/dev/dvb/.cat
/dev/video1> test.mpg produces a video typical of a tv picture without signal (ant-war)... :)config
====
/etc/modprobe.conf:alias char-major-81-1 cx88-dvb
options cx88xx card=2 i2c_scan=1lspci -v:
02:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Modular Technology Holdings Ltd GDI Black Gold
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory atf5000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 202:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Modular Technology Holdings Ltd Unknown device 0108
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory atf6000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2dmesg:
CORE cx88[0]: subsystem: 14c7:0108, board: GDI Black Gold [card=2,insmod option] TV tuner -1 at
0x1fe, Radio tuner -1 at0x1fe
cx88[0]: Test OK
cx88[0]: i2c scan: found device @0x10[???]
cx88[0]: i2c scan: found device @0xa0[eeprom]
cx88[0]: GDI: tuner=unknown
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 23 CORE cx88[0]: subsystem: 14c7:0108, board: GDI Black Gold [card=2,insmod option] TV tuner -1 at0x1fe, Radio tuner -1 at0x1fe
cx88[0]: Test OK
cx88[0]: i2c scan: found device @0x10[???]
cx88[0]: i2c scan: found device @0xa0[eeprom]
cx88[0]: GDI: tuner=unknown
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 23, latency: 64, mmio:0xf5000000cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1Thanks,
//riru
___________________________________________________________Yahoo! Answers - Got a question? Someone out there knows the answer. Try it now.
http://uk.answers.yahoo.com/_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] GDI Black Gold [14c7:0108] cx88 based DVB-T card
Hi Tim,
Am Freitag, den 27.02.2009, 11:28 +0000 schrieb Tim Small:
Quoted 8 lines
Hello,
I'm interested in getting this card working under Linux as well, it's labelled GDI2500PCTV on the back, and has a Conexant CX23881 visible on the front, with a Philips "TU1216/1 H P" RF box... Looks like there may be some more ICs under the metal box, but I'd have to desolder it to check what they were (which I can do if necessary).
Quoted 8 lines
According to the preliminary datasheet which I found, the TU1216 contains a TDA 10046 Channel Decoder, and a TDA6651 Mixer/Oscillator.
There seems to be TU1216 support in both
v4l/saa7134-dvb.candv4l/budget-av.c(code cut-n-paste by the look of it), but I can't see a way to select this tuner with the cx88xx module (e.g. CARDLIST.tuner), unless it's called something different, or is compatible with another Philips tuner.
since there is no analog TV tuning support you use TUNER_ABSENT in cx88-cards.c like SAA7134_BOARD_VIDEOMATE_DVBT_200 and SAA7134_BOARD_PHILIPS_TOUGH do in saa7134-cards.c accordingly.
Quoted 3 lines
So... I'm game for trying to get this working, and have a bit of kernel programming experience, but is there anything else I'm likely to need to know before I set out on this?
You then need to implement the functions they call in saa7134-dvb.c accordingly to cx88-dvb.c and find out if the tuner address is 0x60 or 0x61.
case SAA7134_BOARD_PHILIPS_TOUGH:
fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_60_config,
&dev->i2c_adap);
if (fe0->dvb.frontend) {
fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}For testing, on a first look, you need to introduce the tda10046 including firmware upload #include "tda1004x.h" and at least adapt these functions to cx88-dvb.
/* ==================================================================
* tda1004x based DVB-T cards, helper functions
*/
static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
const struct firmware **fw, char *name)
{
struct saa7134_dev *dev = fe->dvb->priv;
return request_firmware(fw, name, &dev->pci->dev);
}/* ------------------------------------------------------------------
* these tuners are tu1216, td1316(a)
*/
static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->tuner_address;
u8 tuner_buf[4];
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
sizeof(tuner_buf) };
int tuner_frequency = 0;
u8 band, cp, filter;
/* determine charge pump */
tuner_frequency = params->frequency + 36166000;
if (tuner_frequency < 87000000)
return -EINVAL;
else if (tuner_frequency < 130000000)
cp = 3;
else if (tuner_frequency < 160000000)
cp = 5;
else if (tuner_frequency < 200000000)
cp = 6;
else if (tuner_frequency < 290000000)
cp = 3;
else if (tuner_frequency < 420000000)
cp = 5;
else if (tuner_frequency < 480000000)
cp = 6;
else if (tuner_frequency < 620000000)
cp = 3;
else if (tuner_frequency < 830000000)
cp = 5;
else if (tuner_frequency < 895000000)
cp = 7;
else
return -EINVAL;
/* determine band */
if (params->frequency < 49000000)
return -EINVAL;
else if (params->frequency < 161000000)
band = 1;
else if (params->frequency < 444000000)
band = 2;
else if (params->frequency < 861000000)
band = 4;
else
return -EINVAL;
/* setup PLL filter */
switch (params->u.ofdm.bandwidth) {
case BANDWIDTH_6_MHZ:
filter = 0;
break;
case BANDWIDTH_7_MHZ:
filter = 0;
break;
case BANDWIDTH_8_MHZ:
filter = 1;
break;
default:
return -EINVAL;
}
/* calculate divisor
* ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
*/
tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
/* setup tuner buffer */
tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
tuner_buf[1] = tuner_frequency & 0xff;
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
wprintk("could not write to tuner at addr: 0x%02x\n",
addr << 1);
return -EIO;
}
msleep(1);
return 0;
}static int philips_tu1216_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct tda1004x_state *state = fe->demodulator_priv;
u8 addr = state->config->tuner_address;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
/* setup PLL configuration */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
msleep(1);
return 0;
}/* ------------------------------------------------------------------ */
static struct tda1004x_config philips_tu1216_60_config = {
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
.tuner_address = 0x60,
.request_firmware = philips_tda1004x_request_firmware
};static struct tda1004x_config philips_tu1216_61_config = {
.demod_address = 0x8, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, .tuner_address = 0x61, .request_firmware = philips_tda1004x_request_firmware };
/* ------------------------------------------------------------------ */
What could be factored out to avoid code duplication is another later question I guess.
Cheers,
Hermann
Quoted 65 lines
Cheers!
Tim.
Quoted 59 lines · Richard Runds
Hi,
Have a GDI Black Gold card with subsystem 14c7:0108 and I cannot make it work. Does anyone on the list have a working config for this card and/or know how to make this card work?
I'm getting so far as video1 and vbi1 is created, but I don't have any entries in
/dev/dvb/.cat
/dev/video1> test.mpg produces a video typical of a tv picture without signal (ant-war)... :)config
====
/etc/modprobe.conf:alias char-major-81-1 cx88-dvb
options cx88xx card=2 i2c_scan=1lspci -v:
02:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Modular Technology Holdings Ltd GDI Black Gold
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory atf5000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 202:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Modular Technology Holdings Ltd Unknown device 0108
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory atf6000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2dmesg:
CORE cx88[0]: subsystem: 14c7:0108, board: GDI Black Gold [card=2,insmod option] TV tuner -1 at
0x1fe, Radio tuner -1 at0x1fe
cx88[0]: Test OK
cx88[0]: i2c scan: found device @0x10[???]
cx88[0]: i2c scan: found device @0xa0[eeprom]
cx88[0]: GDI: tuner=unknown
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 23 CORE cx88[0]: subsystem: 14c7:0108, board: GDI Black Gold [card=2,insmod option] TV tuner -1 at0x1fe, Radio tuner -1 at0x1fe
cx88[0]: Test OK
cx88[0]: i2c scan: found device @0x10[???]
cx88[0]: i2c scan: found device @0xa0[eeprom]
cx88[0]: GDI: tuner=unknown
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 23, latency: 64, mmio:0xf5000000cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1Thanks,
//riru