lifeview NOT LV3H not working
Hello,
I bought the TV card in the object, it is a PCI hybrid TV-card, both analogue and DVB-T.
I bought it, because on the manufacturer site they said they develop a linux driver, unfortunately when I downloaded the driver (which claims to be for fedora) I found the whole V4L tree to be compiled.
By the way, I tried to compiled it but it failed 'because it looked for the 2.6.19 kernel sources while I'm on Ubuntu Intrepid with a 2.6.27.
So I downloaded the v4l tree from HG, compiled and installed it, but this time was the firmware that was missing. I followed the instruction to get the firmware for the xc3028 from here
and everything seemed to be perfect... but the tuner wasn't able to detect anything.
I tried "w_scan", since there was not a freq table for my town, but it didn't find anything and dmesg reported the following error repeated:
Quoted 16 lines
[ 4982.520836] zl10353: write to reg 6c failed (err = -6)! [ 4982.521593] zl10353: write to reg 6d failed (err = -6)! [ 4982.522337] zl10353: write to reg 6e failed (err = -6)! [ 4982.523079] zl10353: write to reg 6f failed (err = -6)! [ 4982.523822] zl10353: write to reg 5f failed (err = -6)! [ 4982.524565] zl10353: write to reg 71 failed (err = -6)! [ 4982.614090] zl10353_read_register: readreg error (reg=6, ret==-6) [ 4982.614847] zl10353_read_register: readreg error (reg=10, ret==-6) [ 4982.615591] zl10353_read_register: readreg error (reg=11, ret==-6) [ 4982.616817] zl10353_read_register: readreg error (reg=16, ret==-6) [ 4982.617509] zl10353_read_register: readreg error (reg=17, ret==-6) [ 4982.618446] zl10353_read_register: readreg error (reg=18, ret==-6) [ 4982.619373] zl10353_read_register: readreg error (reg=19, ret==-6) [ 4982.620273] zl10353_read_register: readreg error (reg=20, ret==-6) [ 4982.621134] zl10353_read_register: readreg error (reg=21, ret==-6) [ 4982.821710] zl10353_read_register: readreg error (reg=6, ret==-6)
Quoted 8 lines
[ 4982.822474] zl10353_read_register: readreg error (reg=10, ret==-6) [ 4982.823338] zl10353_read_register: readreg error (reg=11, ret==-6) [ 4982.824062] zl10353_read_register: readreg error (reg=16, ret==-6) [ 4982.824877] zl10353_read_register: readreg error (reg=17, ret==-6) [ 4982.825589] zl10353_read_register: readreg error (reg=18, ret==-6) [ 4982.826601] zl10353_read_register: readreg error (reg=19, ret==-6) [ 4982.827463] zl10353_read_register: readreg error (reg=20, ret==-6) [ 4982.828180] zl10353_read_register: readreg error (reg=21, ret==-6)
I also tried scantv for analogue broadcast, but there wat a sign of the analogue tuner work, too. And the output of dmesg this time was the following
Quoted 7 lines
[ 5458.532019] cx88[0]: Calling XC2028/3028 callback [ 5459.008018] cx88[0]: Calling XC2028/3028 callback [ 5459.484026] cx88[0]: Calling XC2028/3028 callback [ 5459.960024] cx88[0]: Calling XC2028/3028 callback [ 5460.448073] cx88[0]: Calling XC2028/3028 callback [ 5460.928071] cx88[0]: Calling XC2028/3028 callback [ 5461.408074] cx88[0]: Calling XC2028/3028 callback
This is the output of dmesg at startup:
[ 13.929094] tuner' 1-0061: chip found @ 0xc2 (cx88[0]) [ 14.185029] xc2028 1-0061: creating new instance [ 14.185036] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 14.185048] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 14.185071] cx88[0]/2: cx2388x 8802 Driver Manager [ 14.185121] cx88-mpeg driver manager 0000:00:0a.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.185141] cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 18, latency: 32, mmio: 0xfa000000 [ 14.185507] cx8800 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.185521] cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 18, latency: 32, mmio: 0xf8000000 [ 14.185753] cx88[0]/0: registered device video0 [v4l2] [ 14.185835] cx88[0]/0: registered device vbi0 [ 14.185902] cx88[0]/0: registered device radio0 [ 14.185967] firmware: requesting xc3028-v27.fw [ 14.733493] cx2388x alsa driver version 0.0.6 loaded [ 16.747916] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 16.748129] cx88[0]: Calling XC2028/3028 callback [ 16.946586] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 16.946596] cx88[0]: Calling XC2028/3028 callback [ 18.146493] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 18.163073] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 18.224014] cx88[0]: Calling XC2028/3028 callback [ 18.346316] EMU10K1_Audigy 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 18.381388] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 18.381396] cx88/2: registering cx8802 driver, type: dvb access: shared [ 18.381403] cx88[0]/2: subsystem: 14f1:8852, board: Geniatech X8000-MT DVBT [card=63] [ 18.381409] cx88[0]/2: cx2388x based DVB/ATSC card [ 18.381415] cx8802_alloc_frontends() allocating 1 frontend(s) [ 18.411681] cx88_audio 0000:00:0a.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 18.411734] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 18.414562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 18.414574] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 18.414733] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 18.439808] xc2028 1-0061: attaching existing instance [ 18.439814] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 18.439817] cx88[0]/2: xc3028 attached [ 18.439825] DVB: registering new adapter (cx88[0]) [ 18.439830] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[omissis]
[ 34.207368] cx88[0]: Calling XC2028/3028 callback [ 34.405817] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. [ 34.405827] cx88[0]: Calling XC2028/3028 callback [ 35.646479] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. [ 35.696021] cx88[0]: Calling XC2028/3028 callback
and this is the output of lsmod (only relevant modules)
ciencio@kinotto:~$ lsmod snd_emu10k1_synth 14464 0 snd_emux_synth 41344 1 snd_emu10k1_synth snd_seq_virmidi 13568 1 snd_emux_synth snd_seq_midi_emul 14592 1 snd_emux_synth zl10353 15752 1 cx88_dvb 28420 0 cx88_vp3054_i2c 10752 1 cx88_dvb snd_via82xx 32536 2 snd_emu10k1 146208 4 snd_emu10k1_synth snd_mpu401_uart 15360 1 snd_via82xx snd_ac97_codec 111652 2 snd_via82xx,snd_emu10k1 ac97_bus 9856 1 snd_ac97_codec snd_util_mem 12416 2 snd_emux_synth,snd_emu10k1 snd_hwdep 15236 2 snd_emux_synth,snd_emu10k1 snd_seq_dummy 10884 0 cx88_alsa 18824 1 snd_seq_oss 38528 0 snd_seq_midi 14336 0 snd_rawmidi 29824 4 snd_seq_virmidi,snd_emu10k1,snd_mpu401_uart,snd_seq_midi evdev 17696 7 snd_pcm_oss 46848 0 snd_mixer_oss 22784 1 snd_pcm_oss videobuf_dvb 15236 1 cx88_dvb snd_seq_midi_event 15232 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi dvb_core 94336 2 cx88_dvb,videobuf_dvb snd_pcm 83204 5 snd_via82xx,snd_emu10k1,snd_ac97_codec,cx88_alsa,snd_pcm_oss snd_seq 57776 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event tuner_xc2028 30772 2 snd_seq_device 15116 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq tuner 36036 0 snd_timer 29960 3 snd_emu10k1,snd_pcm,snd_seq snd_page_alloc 16136 3 snd_via82xx,snd_emu10k1,snd_pcm snd 63268 28 snd_emux_synth,snd_seq_virmidi,snd_via82xx,snd_emu10k1,snd_mpu401_uart,snd_ac97_codec,snd_hwdep,cx88_alsa,snd_seq_oss,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_seq_device,snd_timer cx8800 38456 0 fglrx 1813960 23 parport_pc 39204 1 parport 42604 3 ppdev,lp,parport_pc cx8802 23684 1 cx88_dvb pcspkr 10624 0 cx88xx 79144 4 cx88_dvb,cx88_alsa,cx8800,cx8802 i2c_viapro 15764 0 ir_common 56068 1 cx88xx 2c_algo_bit 14340 2 cx88_vp3054_i2c,cx88xx tveeprom 20356 1 cx88xx v4l2_common 23808 2 tuner,cx8800 videodev 49312 4 tuner,cx8800,cx88xx,v4l2_common i2c_core 31892 9 zl10353,cx88_vp3054_i2c,tuner_xc2028,tuner,cx88xx,i2c_viapro,i2c_algo_bit,tveeprom,v4l2_common v4l1_compat 21892 1 videodev videobuf_dma_sg 20612 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx videobuf_core 26372 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg btcx_risc 12552 4 cx88_alsa,cx8800,cx8802,cx88xx soundcore 15328 1 snd
I can't understand what' wrong with that card. Is there anyone able to help me?
Signature · 1 line
ciencio
ciencio ha scritto:
Quoted 6 lines
Hello,
I bought the TV card in the object, it is a PCI hybrid TV-card, both analogue and DVB-T.I bought it, because on the manufacturer site they said they develop a linux driver, unfortunately when I downloaded the driver (which claims to be for fedora) I found the whole V4L tree to be compiled.
By the way, I tried to compiled it but it failed 'because it looked for the 2.6.19 kernel sources while I'm on Ubuntu Intrepid with a 2.6.27.
While I was trying to make the card work, I found a peculiar note in the NotOnlyTV faq that says that the driver they provide only works on Fedora 6.0.
Since Fedora 6.0 is an "old" distro (Fedora is now at the 10th revision) and since on ubuntu intrepid, the distro I'm using, the 2.6.19 kernel isn't available, I wondered if and how I could manage to apply the modifications they did to the main tree to make the driver work on more recent kernels and if those modifications could be imported in the main tree.
I attach the link to the V4l tree NOT provide is someone more expert than me wants have a look.
http://www.notonlytv.net/download/driver/lv3hlv3afedora.rar
And this is their faq (not very usefull indeed)
http://www.notonlytv.net/download/faq/faq_lv3h.pdf
Last thing, how can I know if someone is working on that card or on the chipset that card uses?
Signature · 1 line
Vic
ciencio ha scritto:
[cut]
Quoted 5 lines
So I downloaded the v4l tree from HG, compiled and installed it, but this time was the firmware that was missing. I followed the instruction to get the firmware for the xc3028 from here
and everything seemed to be perfect... but the tuner wasn't able to detect anything.
Some news from my LV3H
1) after rebuilding the v4l from the main tree the analog tuner seems to be working, What I mean is thata tvtime is able to scan channels and to find them.
2) unfortunately there's no audio, in any way. If I connect the audio out to the audio of my sblive! I only get noise. If I try to send the output of the connexant audio device to the sblive! I always get only noise.
3) no news for the zl10353 driver, which keeps on giving the same error
Quoted 1 line
Quoted 1 line
[ 4982.520836] zl10353: write to reg 6c failed (err = -6)!
I don't know if anyone is interested in this report and I don't even know if I'm writing to the right mailing list.
Please let me know what I shoul post to get help, if it is possible to get help :-)
Signature · 1 line
Vic