sh7785lcr: Add support 32-Bit Extended Address Mode
Subsystems (2)
PATCH v2 2/2 sh7785lcr: Add support 32-Bit Extended Address Mode
We can built 'make sh7785lcr_32bit_config'. And add new command "pmb" for this mode. This command changes PMB for using 512MB system memory.
Signed-off-by Yoshihiro Shimoda <[email protected]>
---
changelog:
[v2] Update README.sh7785lcr for 32-Bit Extended Address Mode
Makefile | 15 +++-
board/renesas/sh7785lcr/config.mk | 4 +
board/renesas/sh7785lcr/lowlevel_init.S | 94 ++++++++++++++++++++
board/renesas/sh7785lcr/sh7785lcr.c | 32 +++++++
board/renesas/sh7785lcr/u-boot.lds | 4 +-
.../renesas/sh7785lcr/{u-boot.lds => u-boot_29bit} | 0
.../renesas/sh7785lcr/{u-boot.lds => u-boot_32bit} | 4 +-
doc/README.sh7785lcr | 41 +++++++++
include/configs/sh7785lcr.h | 21 ++++-
9 files changed, 209 insertions(+), 6 deletions(-)
copy board/renesas/sh7785lcr/{u-boot.lds => u-boot_29bit} (100%)
copy board/renesas/sh7785lcr/{u-boot.lds => u-boot_32bit} (93%)Makefile +14 -1
@@ -3394,10 +3394,23 @@ sh7763rdp_config : unconfig @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas +xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) +sh7785lcr_32bit_config \ sh7785lcr_config : unconfig @ >include/config.h @echo "#define CONFIG_SH7785LCR 1" >> include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas + @if [ "$(findstring 32bit, $@)" ] ; then \ + echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ + cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \ + $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ + echo "TEXT_BASE = 0x8ff80000" > \ + $(obj)board/renesas/sh7785lcr/config.tmp ; \ + $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ + else \ + cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \ + $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ + fi + @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include
board/renesas/sh7785lcr/config.mk +4 -0
@@ -22,4 +22,8 @@ # # NOTE: Must match value used in u-boot.lds (in this directory). # +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE TEXT_BASE = 0x0ff80000 +endif
board/renesas/sh7785lcr/lowlevel_init.S +94 -0
112 lines not on this page · raw message
board/renesas/sh7785lcr/sh7785lcr.c +32 -0
@@ -54,3 +54,35 @@ int board_eth_init(bd_t *bis) {return pci_eth_init (bis); } + +#if defined(CONFIG_SH_32BIT ) +int do_pmb (cmd_tbl_t *cmdtp,int flag,int argc,char *argv[]) +{ +/* clear ITLB */ +writel (0x00000004 ,0xff000010 ); + +/* delete PMB for peripheral */ +writel (0 ,PMB_ADDR_BASE (0 )); +writel (0 ,PMB_DATA_BASE (0 )); +writel (0 ,PMB_ADDR_BASE (1 )); +writel (0 ,PMB_DATA_BASE (1 )); +writel (0 ,PMB_ADDR_BASE (2 )); +writel (0 ,PMB_DATA_BASE (2 )); + +/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ +writel (mk_pmb_addr_val (0x80 ),PMB_ADDR_BASE (8 )); +writel (mk_pmb_data_val (0x40 ,0 ,1 ,1 ,0 ,1 ,1 ),PMB_DATA_BASE (8 )); +writel (mk_pmb_addr_val (0xa0 ),PMB_ADDR_BASE (12 )); +writel (mk_pmb_data_val (0x40 ,1 ,1 ,1 ,0 ,0 ,1 ),PMB_DATA_BASE (12 )); + +return 0 ; +} + +U_BOOT_CMD ( + pmb,1 ,1 , do_pmb, +"pmb - PMB setting\n" , +"\n" +" - PMB setting for all SDRAM mapping\n" +); +#endif +
board/renesas/sh7785lcr/u-boot.lds +2 -2
@@ -1,7 +1,7 @@ /* * Copyrigth (c) 2007 * Nobuhiro Iwamatsu <[email protected]> - * Copyrigth (c) 2008 Yoshihiro Shimoda <[email protected]> + * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <[email protected]> * * See file CREDITS for list of people who contributed to this * project.
@@ -28,7 +28,7 @@ ENTRY(_start) SECTIONS { - . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024); + . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024); PROVIDE (reloc_dst = .);
board/renesas/sh7785lcr/u-boot_29bit renamed from board/renesas/sh7785lcr/u-boot.lds +0 -0
board/renesas/sh7785lcr/u-boot_32bit renamed from board/renesas/sh7785lcr/u-boot.lds +2 -2
@@ -1,7 +1,7 @@ /* * Copyrigth (c) 2007 * Nobuhiro Iwamatsu <[email protected]> - * Copyrigth (c) 2008 Yoshihiro Shimoda <[email protected]> + * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <[email protected]> * * See file CREDITS for list of people who contributed to this * project.
@@ -28,7 +28,7 @@ ENTRY(_start) SECTIONS { - . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024); + . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024); PROVIDE (reloc_dst = .);
doc/README.sh7785lcr +41 -0
56 lines not on this page · raw message
include/configs/sh7785lcr.h +20 -1
@@ -61,11 +61,20 @@#undef CONFIG_SHOW_BOOT_PROGRESS/* MEMORY */ +#if defined(CONFIG_SH_32BIT ) +#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000) +#define SH7785LCR_SDRAM_BASE (0x88000000) +#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) +#define SH7785LCR_FLASH_BASE_1 (0xa0000000) +#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) +#define SH7785LCR_USB_BASE (0xa6000000) +#else #define SH7785LCR_SDRAM_BASE (0x08000000)#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024)#define SH7785LCR_FLASH_BASE_1 (0xa0000000)#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)#define SH7785LCR_USB_BASE (0xb4000000) +#endif #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PROMPT "=> "
@@ -133,9 +142,15 @@#define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI +#if defined(CONFIG_SH_32BIT ) +#define CONFIG_SH7780_PCI_LSR 0x1ff00001 +#define CONFIG_SH7780_PCI_LAR 0x5f000000 +#define CONFIG_SH7780_PCI_BAR 0x5f000000 +#else #define CONFIG_SH7780_PCI_LSR 0x07f00001#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE +#endif #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1
@@ -147,8 +162,12 @@#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS#define CONFIG_PCI_IO_SIZE 0x00200000/* Size of IO window */ -#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE +#if defined(CONFIG_SH_32BIT ) +#define CONFIG_PCI_SYS_PHYS SH7785LCR_SDRAM_PHYS_BASE +#else #define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE +#endif +#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE/* Network device (RTL8169) support */
Signature · 1 line
1.5.5
Nobuhiro Iwamatsu
AppliedPATCH v2 2/2 sh7785lcr: Add support 32-Bit Extended Address Mode
2009/3/3 Yoshihiro Shimoda <[email protected]>:
Quoted 7 lines
We can built 'make
sh7785lcr_32bit_config'. And add new command "pmb" for this mode. This command changes PMB for using 512MB system memory.Signed-off-by Yoshihiro Shimoda <[email protected]>---
?changelog:
?[v2] Update README.sh7785lcr for 32-Bit Extended Address Mode
Applied, thanks.
Best regards,
Nobuhiro
Signature · 1 line
Nobuhiro Iwamatsu