MIPS: NEC VR5500 processor support fixup

Current VR5500 processor support lacks of some functions which are expected to be configured/syhthesized on arch initialization.

Here're some VR5500A spec notes:

* all execution hazards are handled in hardware.

* Once VR5500A stops the operation of the pipeline by WAIT instruction, it could return from the standby mode only when either a reset, NMI request, or all enabled interrupts is/are detected. In other words, if interrupts are disabled by Status.IE=0, it keeps in standby mode even when interrupts are internally asserted.

Notes on WAIT: The operation of the processor is undefined if WAIT insn is in the branch delay slot. The operation is also undefined if WAIT insn is executed when Status.EXL and Status.ERL are set to 1.

* VR5500A core only implements the Load prefetch.

With these changes, it boots fine.

---

Hi,

I have several EMMA2RH markeins patches in my local branch, but before anything else, here's a VR5500 support patch. Please review.

I'm afraid that I might put CPU_R5500 enum in incorrect position. If it doesn't suit for you, please let me know.

Shinya

arch/mips/include/asm/hazards.h  |    3 ++-
arch/mips/include/asm/prefetch.h |    2 +-
arch/mips/kernel/cpu-probe.c     |    1 +
arch/mips/mm/page.c              |    3 ++-
arch/mips/mm/tlbex.c             |    1 +
5 files changed, 7 insertions(+), 3 deletions(-)

index 43baed1..134e1fc 100644
@@ -138,7 +138,8 @@ do {									\

		__instruction_hazard();					\
} while (0)

-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \

+ defined(CONFIG_CPU_R5500)

/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.

index 1785083..b5b2103 100644
@@ -26,7 +26,7 @@
 * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
 * current versions due to erratum G105.
 *
- * VR7701 only implements the Load prefetch.
+ * VR5500 (including VR5701 and VR7701) only implements the Load prefetch.
 *
 * Finally MIPS32 and MIPS64 implement all of the following hints.
 */

index a7162a4..1bdbcad 100644
@@ -149,6 +149,7 @@ void __init check_wait(void)

	case CPU_R4650:
	case CPU_R4700:
	case CPU_R5000:

+ case CPU_R5500:
case CPU_NEVADA:
case CPU_4KC:
case CPU_4KEC:

index 1417c64..48060c6 100644
@@ -172,8 +172,9 @@ static void __cpuinit set_prefetch_parameters(void)

		 */
		cache_line_size = cpu_dcache_line_size();
		switch (current_cpu_type()) {

+ case CPU_R5500:
case CPU_TX49XX:
- /* TX49 supports only Pref_Load */
+ /* These processors only support the Pref_Load. */

			pref_bias_copy_load = 256;
			break;

index 4294203..f335cf6 100644
@@ -318,6 +318,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,

	case CPU_BCM4710:
	case CPU_LOONGSON2:
	case CPU_CAVIUM_OCTEON:
+	case CPU_R5500:
		if (m4kc_tlbp_war())
			uasm_i_nop(p);
		tlbw(p);

On Tue, Mar 03, 2009 at 06:05:51PM +0900, Shinya Kuribayashi wrote:

Thanks, applied!

Ralf

MIPS: Enable prefetch option for VR5500 processor

---
Hi Ralf,

I haven't finished fixing up for VR5500 processor support, sigh :-( I hope this is the last one, and don't miss anything essential.

Shinya

arch/mips/mm/c-r4k.c | 1 +

1 files changed, 1 insertions(+), 0 deletions(-)

index c43f4b2..b42b9d2 100644
@@ -781,6 +781,7 @@ static void __cpuinit probe_pcache(void)

		c->dcache.waybit = 0;

		c->options |= MIPS_CPU_CACHE_CDEX_P;
+		c->options |= MIPS_CPU_PREFETCH;
		break;

	case CPU_TX49XX:

Hello.

        c->options |= MIPS_CPU_CACHE_CDEX_P | MIPS_CPU_PREFETCH;

---
Hi,

Thank you, patch revised.

Shinya

arch/mips/mm/c-r4k.c | 2 +-

1 files changed, 1 insertions(+), 1 deletions(-)

index c43f4b2..871e828 100644
@@ -780,7 +780,7 @@ static void __cpuinit probe_pcache(void)

		c->dcache.ways = 2;
		c->dcache.waybit = 0;

- c->options |= MIPS_CPU_CACHE_CDEX_P;

+		c->options |= MIPS_CPU_CACHE_CDEX_P | MIPS_CPU_PREFETCH;
		break;

	case CPU_TX49XX: