merged dracut git

DISCUSSION Harald Hoyer 4 participants 10 messages Mar 4, 2009 – Mar 6, 2009 7 messages not in the archive

Share & tools

Harald Hoyer

author

2009-03-04 17:44 UTC #0 lore raw

Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.

git://surfsite.org/pub/git/dracut.git

branch merge
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

Harald Hoyer

author

2009-03-05 13:33 UTC #2 lore raw

Quoted 10 lines · Harald Hoyer

Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of

http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git

$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img

install to /boot , setup grub.conf and reboot

$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm

--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

Harald Hoyer

author

2009-03-05 16:30 UTC #4 lore raw

Quoted 25 lines · Harald Hoyer

Quoted 10 lines · Harald Hoyer
Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git
$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img

Quoted 8 lines

install to /boot , setup grub.conf and reboot

$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm

and now with a plymouth module, which also asks for the crypto password --
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

Victor Lowther

2009-03-05 17:00 UTC #6 lore raw

Quoted 28 lines · Harald Hoyer

Quoted 14 lines · Harald Hoyer
Quoted 10 lines · Harald Hoyer
Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git
Quoted 12 lines
$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img
install to /boot , setup grub.conf and reboot
$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm

Quoted 1 line

and now with a plymouth module, which also asks for the crypto password

Could you post your patches to the list for review?

Quoted 5 lines

--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 812C8AD3-74F9-444C-89F7-20C2D89688FE-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

Harald Hoyer

author

2009-03-05 17:28 UTC #8 lore raw

Quoted 30 lines · Victor Lowther

Quoted 28 lines · Harald Hoyer
Quoted 26 lines · Harald Hoyer
Quoted 10 lines · Harald Hoyer
Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge git://surfsite.org/pub/git/dracut.git
$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img
install to /boot , setup grub.conf and reboot
$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm

Quoted 4 lines

Quoted 1 line
and now with a plymouth module, which also asks for the crypto password
Could you post your patches to the list for review?

Hmm, everyone can view them on html or in git.. I hate to clutter the list with patches.

--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

Victor Lowther

2009-03-05 19:15 UTC #10 lore raw

Quoted 30 lines · Harald Hoyer

Quoted 29 lines · Victor Lowther
Quoted 28 lines · Harald Hoyer
Quoted 26 lines · Harald Hoyer
Quoted 10 lines · Harald Hoyer
Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git
$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img
install to /boot , setup grub.conf and reboot
$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm

Quoted 4 lines

Quoted 2 lines
Quoted 1 line
and now with a plymouth module, which also asks for the crypto password
Could you post your patches to the list for review?
Hmm, everyone can view them on html or in git.. I hate to clutter the list with patches.

I think everyone on the list is fine with patches - it is not a matter of being easy to view them, it is a matter of making review easy.-- To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Harald Hoyer

author

2009-03-05 18:40 UTC #11 lore raw

In reply to a message not in the archive

Quoted 28 lines · Harald Hoyer

Quoted 27 lines · Harald Hoyer
Quoted 10 lines · Harald Hoyer
Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git
$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img
install to /boot , setup grub.conf and reboot

Quoted 8 lines

Quoted 6 lines
$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm
and now with a plymouth module, which also asks for the crypto password

added lots of cleanups.
rpm now build correctly.
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

Kay Sievers

2009-03-05 19:24 UTC #13 lore raw

Quoted 32 lines · Harald Hoyer

Quoted 31 lines · Harald Hoyer
Quoted 29 lines · Harald Hoyer
Quoted 8 lines · Harald Hoyer
Here is a dracut git with most of the list patches merged, I was able to boot from it by specifying the list of modules I wanted.
git://surfsite.org/pub/git/dracut.git
branch merge
--
ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git
$ git clone git://surfsite.org/pub/git/dracut.git
$ cd dracut
$ git checkout merge
$ make testimage
...
wrote test-2.6.27.19-170.2.35.fc10.x86_64.img
install to /boot , setup grub.conf and reboot
$ make rpm
...
Wrote: ...dracut-0.0-1.git87930555.fc10.src.rpm
Wrote: ...x86_64/dracut-0.0-1.git87930555.fc10.x86_64.rpm
Wrote: ...x86_64/dracut-debuginfo-0.0-1.git87930555.fc10.x86_64.rpm

Quoted 4 lines

Quoted 1 line
and now with a plymouth module, which also asks for the crypto password
added lots of cleanups.
rpm now build correctly.

With this repo, and:
dracutmodules="kernel-modules udev-rules base"
in:
/etc/dracut.conf

and:
"sd_mod"
which was missing, manually added to:
/usr/lib/dracut/modules.d/90kernel-modules/install

and:
install ata_piix /sbin/modprobe ahci 2>&1 |:; /sbin/modprobe
--ignore-install ata_piix
which prevents the module from being included, removed from:
/etc/modprobe.conf

I can boot a SUSE box. :)

Best,
Kay
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): ac3eb2510903051124s7140abb7o250b08c2053864d6-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

Kay Sievers

2009-03-06 15:30 UTC #15 lore raw

Quoted 15 lines · Kay Sievers

Quoted 2 lines · Harald Hoyer
added lots of cleanups.
rpm now build correctly.
With this repo, and:
dracutmodules="kernel-modules udev-rules base"
in:
/etc/dracut.conf
and:
"sd_mod"
which was missing, manually added to:
/usr/lib/dracut/modules.d/90kernel-modules/install

Quoted 7 lines

and:
install ata_piix /sbin/modprobe ahci 2>&1 |:; /sbin/modprobe --ignore-install ata_piix
which prevents the module from being included, removed from:
/etc/modprobe.conf
I can boot a SUSE box. :)

All solved in Harald's current repo now. I'm writing this from a SUSE box, with stock distro kernel, and an initramfs created by dracut.

Thanks,
Kay
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

Dan Williams

2009-03-05 23:22 UTC #16 lore raw

In reply to a message not in the archive

Quoted 6 lines · Harald Hoyer

ok, I was able to boot from a LVM root on a crypted striped raid array with the latest version of the "merge" branch of
http://git.surfsite.org/git/gitweb.cgi?p=dracut.git;a=shortlog;h=refs/heads/merge
git://surfsite.org/pub/git/dracut.git

This approach appears to ignore Jeremy's call for raid arrays and such to be auto assembled as devices are discovered [1].

--
Dan

[1] http://article.gmane.org/gmane.linux.kernel.initramfs/69
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html