Skip to contentSkip to conversation

PowerPC: MPC85xx: TQM8548: use proper phy-handles for enet2 and enet3

PATCH Applied Wolfgang Grandegger 2 participants 2 messages Mar 16, 2009 – Apr 7, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 2/3 PowerPC: MPC85xx: TQM8548: use proper phy-handles for enet2 and enet3

For enet2 and enet3 the wrong phy-handles have been used in DTS files of the TQM8548 modules.

---
 arch/powerpc/boot/dts/tqm8548-bigflash.dts |    4 ++--
 arch/powerpc/boot/dts/tqm8548.dts          |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/boot/dts/tqm8548-bigflash.dts +2 -2
index dd43dbe..29a2b6f 100644
@@ -262,7 +262,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 		};
 
 		enet3: ethernet@27000 {
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 		};
 
 		serial0: serial@4500 {
arch/powerpc/boot/dts/tqm8548.dts +2 -2
index b949a8c..81d3fbb 100644
@@ -262,7 +262,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 		};
 
 		enet3: ethernet@27000 {
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 		};
 
 		serial0: serial@4500 {
Signature · 1 line
1.6.0.6
#1 lore raw
Quoted 8 lines · Wolfgang Grandegger

For enet2 and enet3 the wrong phy-handles have been used in DTS files of the TQM8548 modules.

---

arch/powerpc/boot/dts/tqm8548-bigflash.dts |    4 ++--
arch/powerpc/boot/dts/tqm8548.dts          |    4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)

fixup & applied

- k